Challenges and improvement pathways to develop quasi-1D (Sb1-xBix)2Se3-based materials for optically tuneable photovoltaic applications. Towards chalcogenide narrow-bandgap devices
Source abstract
Abstract
Quasi-1D chalcogenides have shown great promises in the development of emerging photovoltaic technologies. However, most quasi-1D semiconductors other than Sb2Se3 and Sb2S3 have been seldom investigated for energy generation applications. Indeed, cationic or anionic alloying strategies allow changing the bandgap of these materials, opening the door to the development of an extended range of chalcogenides with tuneable optical and electrical properties. In this work, Bi incorporation into the Sb2Se3 structure has been proved as an effective approach to modulate the bandgap between <1.0 eV and 1.3 eV, demonstrating conversion efficiencies between 3 and 5% for 0.01 < x = 0.10. However, there is a noticeable deterioration in optoelectronic parameters for x > 0.1. In order to better understand the underlying mechanisms leading to the formation of (Sb1-xBix)2Se3, and thus design specific strategies to enhance its properties, thin films with different annealing time and temperature have been synthesized and characterized. Interestingly, it has been observed that Sb2Se3 and Bi2Se3 are formed first, with Bi melting at 300 ¿C and diffusing rapidly towards the surface of the film. At higher temperature, the binary compounds combine to form the solid solution, however as the dwell time increases, (Sb1-xBix)2Se3 decomposes again into Bi2Se3 and Sb. This study has shown that the material is essentially limited by compositional disorder and recombination via defects. Likewise, routes have been proposed to improve morphology and uniformity of the layer, achieving efficiencies higher than 1% for x > 0.2
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Emergence of highly transparent photovoltaics for distributed applications10.1038/s41560-017-0016-9 ↗
2. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
3. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
4. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
5. 9.2%-Efficient core-shell structured antimony selenide nanorod array solar cells
6. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy10.1002/adfm.201304238 ↗
7. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
8. The complex defect chemistry of antimony selenide10.1039/C9TA02022E ↗
9. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
10. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb 2 Se 310.1021/acsami.9b01220 ↗
11. 1D SbSeI, SbSI, and SbSBr with high stability and novel properties for microelectronic, optoelectronic, and thermoelectric applications
12. Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices10.1016/j.pmatsci.2011.08.003 ↗
13. The path towards efficient wide band gap thin-film kesterite solar cells with transparent back contact for viable tandem application
14. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
15. All antimony chalcogenide tandem solar cell
16. What makes a good solar cell?10.1002/aenm.201703385 ↗
17. Bismuth oxyhalide layered materials for energy and environmental applications10.1016/j.nanoen.2017.09.008 ↗
18. Bismuth chalcohalides and oxyhalides as optoelectronic materials10.1103/PhysRevB.93.104108 ↗
19. Optoelectronic and energy level exploration of bismuth and antimony-based materials for lead-free solar cells10.1021/acs.chemmater.0c01503 ↗
20. Growth of visible-light-responsive ferroelectric SbSI thin films by molecular beam epitaxy10.1063/1.5142642 ↗
21. Nonlinear optical response of SbSI nanorods dominated with direct band gaps10.1021/acs.jpcc.1c04282 ↗
22. Efficient solar cells based on light-harvesting antimony sulfoiodide10.1002/aenm.201701901 ↗
23. Electronic and optical properties of SbSBr, SbSI and SbSeI10.1016/0038-1098(78)90964-X ↗
24. Peculiarities of the energy spectrum and edge absorption in the chain compounds AVBVICVII10.1002/pssb.19680300206 ↗
25. Optical properties of undoped and V-doped VA-VIA-VIIA single crystals10.1002/pssb.2221870124 ↗
26. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
27. Surfactant-assisted solvothermal synthesis of Bi2S3 nanorods10.1016/j.jcrysgro.2007.03.062 ↗
28. Thickness dependent properties of chemically deposited Bi2S3 thin films10.1016/S0040-6090(96)09540-5 ↗
29. Efficient solar cells employing light-harvesting Sb 0.67 Bi 0.33 SI10.1002/adma.201808344 ↗
30. Bismuth chalcogenide iodides Bi13S18I2 and BiSI: solvothermal synthesis, photoelectric behavior, and photovoltaic performance10.1039/C9TC05139B ↗
31. Photovoltaic performance of phase-pure orthorhombic BiSI thin-films10.1021/acsaem.9b00544 ↗
32. Optical properties of undoped and chromium-doped VA-VIA-VIIA single crystals10.1007/BF01151535 ↗
33. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
34. Structural, morphological, compositional, optical and electrical properties of Sb2Se3 thin films deposited by pulsed laser deposition10.1016/j.spmi.2020.106618 ↗
35. Band gap temperature-dependence of close-space sublimation grown Sb2Se3 by photo-reflectance10.1063/1.5027157 ↗
36. Thin-film (Sb,Bi)2Se3 Semiconducting layers with tunable band gaps below 1 ev for photovoltaic applications thin-film (Sb,Bi)2Se3semiconducting layers. Thomas Paul Weiss et al10.1103/PhysRevApplied.14.024014 ↗
37. High thermoelectric performance in Te-free (Bi,Sb)2Se3: via structural transition induced band convergence and chemical bond softening10.1039/C6EE02674E ↗
38. Structural and optical properties of electrodeposited Bi 2-xSbxSe3 thin films10.1149/2.001203ssl ↗
39. Crystal structure and chemistry of topological insulators10.1039/c3tc30186a ↗
40. Electronic structure, optical properties and Compton profiles of Bi 2S 3 and Bi 2Se 310.1016/j.solidstatesciences.2011.11.025 ↗
41. Synthesis and thermoelectric properties of Bi2Se3 nanostructures
42. Complex optical conductivity of Bi2Se3thin film: approaching two-dimensional limit10.1063/5.0049170 ↗
43. Electrodeposition and ab initio studies of metastable orthorhombic Bi2Se3: a novel semiconductor with bandgap for photovoltaic applications10.1021/acs.jpcc.6b02559 ↗
44. Structural and electronic properties of Bi2Se3 topological insulator thin films grown by pulsed laser deposition10.1063/1.4982207 ↗
45. Ordered growth of topological insulator Bi2Se3 thin films on dielectric amorphous SiO2 by MBE10.1039/c3nr03032f ↗
46. P.B. Souza, M.A. Tumelero, R. Faccio, R. Ahmed, C.C. Plá Cid, G. Zangari, et al., Vibrational properties of the Bi2Se3 orthorhombic metastable phase, ArXiv preprint (2020), arXiv:2008.08994.
47. Morphology and seebeck coefficients of electrodeposited Bi2Se3 films grown onto Au(111)/Si substrates10.1016/j.electacta.2020.137554 ↗
48. Growth and characterization of MBE-grown (Bi1-xSbx)2Se3 topological insulator10.7567/JJAP.56.070311 ↗
49. Topological phase transitions in (Bi1-xInx) 2Se3 and (Bi1-xSbx) 2Se3
50. Ultrahigh responsivity of ternary Sb-Bi-Se nanowire photodetectors10.1002/adfm.201304176 ↗
51. Metal-insulator transition in variably doped (Bi1-xSb x)2Se3 nanosheets10.1039/c3nr01155k ↗
52. Efficient Se-rich Sb2Se3/CdS planar heterojunction solar cells by sequential processing: control and influence of Se content10.1002/solr.202070075 ↗
53. Does Sb2Se3 admit nonstoichiometric conditions? How modifying the overall Se content affects the structural, optical, and optoelectronic properties of Sb2Se3 thin films10.1021/acsami.1c20764 ↗
54. Layer-dependent dielectric permittivity of topological insulator Bi2Se3 thin films10.1016/j.apsusc.2019.144822 ↗
55. Importance of interfacial passivation in the high efficiency of Sb2Se3 thin-film solar cells: numerical evidence10.1021/acsaem.0c01203 ↗
56. Status and potential of CdTe solar-cell efficiency10.1109/JPHOTOV.2015.2434594 ↗
57. Influence of affinity, band gap and ambient temperature on the efficiency of CIGS solar cells10.1016/j.ijleo.2020.165541 ↗
58. Sun · 2015
59. Würfel · 2016
60. Abou-Ras · 2016
61. Analysis of the forward I–V characteristics of Al-implanted 4H-SiC p-i-n diodes with modeling of recombination and trapping effects due to intrinsic and doping-induced defect states10.1007/s11664-017-5916-8 ↗
62. Depletion-region recombination in silicon solar cells: when does mdr = 2? 16th European photovoltaic
63. The recombination parameter J010.1016/j.egypro.2014.08.073 ↗
64. The origin of ideality factors n>2 of shunts and surfaces in the dark I-V curves of solar cells
65. Interpretation of the commonly observed I-V characteristics of C-SI cells having ideality factor larger than two. Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion
66. Theory of electronic transport in noncrystalline junctions10.1063/1.3213336 ↗
67. Importance of interfacial passivation in the high efficiency of Sb2Se3 thin-film solar cells: numerical evidence10.1021/acsaem.0c01203 ↗
68. Numerical investigation of interface passivation strategies for Sb 2 Se 3/CdS solar cells
69. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
70. Identifying Raman modes of Sb2Se3and their symmetries using angle-resolved polarised Raman spectra10.1039/D0TA01783C ↗
71. Multiwavelength excitation Raman scattering study of Sb2Se3 compound: fundamental vibrational properties and secondary phases detection10.1088/2053-1583/ab4029 ↗
72. On the identification of Sb2Se3 using Raman scattering10.1557/mrc.2018.94 ↗
73. Temperature dependent Raman scattering studies of three dimensional topological insulators Bi2Se310.1063/1.4871860 ↗
74. Application of a modified random-element-isodisplacement model to long-wavelength optic phonons of mixed crystals10.1103/PhysRev.172.924 ↗
75. Improved efficiency of Sb2Se3/CdS thin-film solar cells: the effect of low-temperature pre-annealing of the absorbers10.1016/j.solener.2018.08.065 ↗
76. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
77. Extrinsic dopants in quasi-one-dimensional photovoltaic semiconductor Sb2S3: a first-principles study10.1063/1.5140751 ↗
78. Identifying Raman modes of Sb2Se3and their symmetries using angle-resolved polarised Raman spectra10.1039/D0TA01783C ↗
79. Role of the substrates in the ribbon orientation of Sb2Se3 films grown by Low-Temperature Pulsed Electron Deposition10.1016/j.solmat.2020.110724 ↗
80. Budavari · 1996
81. Olin · 2005
82. Lide · 2004
83. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
84. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
85. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
86. Rear interface engineering of kesterite Cu2ZnSnSe4 solar cells by adding CuGaSe2 thin layers10.1002/pip.3366 ↗
87. Roughness-controlled Cu2ZnSn(S,Se)4 thin-film solar cells with reduced charge recombination10.1021/acsami.9b05852 ↗