Efficient CdS/Sb2S3 interfacial modification using sodium borohydride etching for enhanced performance of low-cost full-inorganic antimony-based solar cells
Source abstract
Abstract
Antimony sulfide (Sb 2S 3 ) is a promising material for photovoltaic applications because of its high absorption coefficient, environmental friendliness and low cost. Nevertheless, the conversion efficiency of Sb 2S 3 solar cells severely deviates from theoretical predictions, and the interface between CdS and Sb 2S 3 is crucial for the overall performance. In this study, we conducted a highly effective sodium borohydride (NaBH 4) etching to modify the CdS/Sb 2S 3 interface, aiming to improve the device performance. The NaBH 4 etching led to a reduction in surface roughness and an enhancement in the hydrophilicity of the CdS layer, creating a more conducive environment for the subsequent deposition of the Sb 2S 3 absorber layer. Simultaneously, the reduction of cadmium oxide serves to optimize interfacial energy alignment and minimize recombination losses. Ultimately, our full-inorganic Sb 2S 3 solar cells, featuring the configuration FTO/CdS/Sb 2S 3/MnS/Carbon, attain a PCE of 6.26%. This marks a significant improvement of 15% compared to cells without NaBH 4 etching. This study presents a feasible and efficient perspective for modifying the CdS/Sb 2S 3 interface, thereby enhancing the performance of Sb-based solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
2. Manipulating the morphology of CdS/Sb2S3 heterojunction using a Mg-doped tin oxide buffer layer for highly efficient solar cells10.1016/j.jechem.2021.08.029 ↗
3. A Codoping Strategy for efficient planar heterojunction Sb2S3 solar cells10.1002/aenm.202202897 ↗
4. Novel WO3/Sb2S3 heterojunction Photocatalyst based on WO3 of different morphologies for enhanced efficiency in photoelectrochemical water splitting10.1021/acsami.6b00429 ↗
5. CuInS2/Sb2S3 heterostructure modified with noble metal co-catalyst for efficient photoelectrochemical water splitting10.1016/j.jallcom.2019.04.312 ↗
6. A novel Multi-Sulfur source Collaborative chemical bath deposition Technology enables 8%-efficiency Sb2S3 planar solar cells10.1002/adma.202206242 ↗
7. Wide bandgap Sb2S3 solar cells10.1002/adfm.202100265 ↗
8. From flat to nanostructured photovoltaics: Balance between thickness of the absorber and charge Screening in Sensitized solar cells10.1021/nn204382k ↗
9. Solar cells with Sb2S3 absorber films10.1016/j.tsf.2008.11.060 ↗
10. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber10.1039/C7TC02460F ↗
11. Biocrust wetting induced change in soil surface roughness as influenced by biocrust type, coverage and wetting patterns10.1016/j.geoderma.2017.06.032 ↗
12. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
13. Study of loss mechanisms on Sb2(S1-xSex)3 solar cell with n-i-p structure: toward an efficiency promotion10.1063/5.0032867 ↗
14. Enhancing the efficiency of Sb2S3 solar cells using dual-functional potassium doping
15. Cu doping concentration effect on the physical properties of CdS thin films obtained by the CBD technique
16. Mn-doped CdS quantum dots as sensitizers in solar cells
17. Interface Engineering via sputtered oxygenated CdS:O window layer for highly efficient Sb2Se3 thin-film solar cells with efficiency above 710.1002/solr.201900225 ↗
18. Promising Sb2(S,Se)3 solar cells with high open voltage by application of a TiO2/CdS double buffer layer10.1002/solr.201800208 ↗
19. Mechanisms and modification of nonlinear shunt leakage in Sb2Se3 thin film solar cells10.1016/j.solmat.2018.06.022 ↗
20. Efficient double buffer layer Sb2(SexS1-x)3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗
21. Ambient CdCl2 treatment on CdS buffer layer for improved performance of Sb2Se3 thin film photovoltaics10.1063/1.4932544 ↗
22. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
23. Regulating energy band alignment via Alkaline metal Fluoride Assisted solution post-treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency10.1002/aenm.202103015 ↗
24. Hydrazine hydrate-induced surface modification of CdS electron transport layer enables 10.30%-efficient Sb2(S,Se)3 planar solar cells10.1002/advs.202202356 ↗
25. NaBH4 surface modification on CeO2 nanorods supported transition-metal catalysts for low temperature CO Oxidation10.1002/cctc.202000789 ↗
26. In-situ DRIFTS study of chemically etched CeO2 nanorods supported transition metal oxide catalysts
27. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
28. High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells10.1126/science.aat5055 ↗
29. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2
30. Enhanced hydrothermal heterogeneous deposition with surfactant additives for efficient Sb2S3 solar cells
31. Fabrication of Sb2S3 thin films by sputtering and post-annealing for solar cells10.1016/j.ceramint.2018.10.155 ↗
32. Improving the photoelectrochemical and photocatalytic performance of CdO nanorods with CdS decoration10.1039/c3ce40092a ↗
33. Effects of CdCl2 heat treatment on the morphological and chemical properties of CdTe/CdS thin films solar cells10.1016/j.apsusc.2012.03.020 ↗
34. Deposition of cadmium sulfide films by decomposition of thiourea in basic solutions10.1021/cm00025a012 ↗
35. Study of the influence of annealing on the properties of CBD-CdS thin films10.1016/S0169-4332(02)01082-6 ↗
36. A novel reduction approach for fabrication of transparent conducting fluorine and tin doped indium oxide thin film with low sheet resistance10.1016/j.ceramint.2022.05.320 ↗
37. Porous, oxygen vacancy enhanced CeO2-x Microspheres with efficient Enzyme-Mimetic and Photothermal properties
38. Enhanced transparent-conducting fluorine-doped tin oxide films formed by Aerosol-Assisted Chemical Vapour Deposition10.1039/C2TC00400C ↗
39. Nonstoichiometry-Induced carrier modification in Gapless type atomic switch device using Cu2S Mixed conductor
40. Performance improvement of Sb2Se3 thin-film solar cells through ultraviolet ozone treatment10.1007/s12598-022-01969-4 ↗
41. Bandgap variation in size controlled nanostructured Li-Ni co-doped CdO thin films10.1016/j.jallcom.2011.11.098 ↗
42. Photodiode based on CdO thin films as electron transport layer10.1007/s11664-016-4819-4 ↗
43. Oxygenated CdS buffer layers enabling high open-circuit voltages in Earth-Abundant Cu2BaSnS4 thin-film solar cells10.1002/aenm.201601803 ↗
44. Optimization of CdTe thin-film solar cell efficiency using a sputtered, oxygenated CdS window layer10.1002/pip.2578 ↗
45. Synergistic effect through the introduction of inorganic Zinc Halides at the interface of TiO2 and Sb2S3 for high-performance Sb2S3 planar thin-film solar cells10.1021/acsami.0c11550 ↗
46. Self-passivated CdS buffer layer for antimony sulfide solar cells
47. 24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition10.1016/j.joule.2022.07.004 ↗
48. Over 6% Certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and Postselenization10.1002/aelm.201800683 ↗
49. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
50. A Robust hydrothermal Sulfuration Strategy toward effective defect passivation enabling 6.92% efficiency Sb2S3 solar cells10.1002/solr.202201115 ↗
51. High efficiency flexible perovskite solar cells using superior low temperature TiO210.1039/C5EE02155C ↗