journal article·2024-08Open access

Wet synthesis of Cu2MnSnS4 thin films for photovoltaics: Oxidation control and CdS impact on device performances

F. Butrichi, V. Trifiletti, G. Tseberlidis, B.E.G. Colombo, F. Taglietti, M. Rancan, L. Armelao, S. Binetti

Abstract

The manganese-based quaternary chalcogenide Cu 2 MnSnS 4 could have the chance to promote the production of sustainable solar cells, but the reported photovoltaic efficiencies are still too poor to push the research on the topic. Herein, a low-cost, straightforward, and sustainable wet methodology to synthesise Cu 2 MnSnS 4 thin films is reported. The main issues that hindered their power conversion efficiencies have been investigated. Firstly, the manganese oxidation state has been stabilised by fine-tuning the synthesis parameters. Cu 2 MnSnS 4 was obtained in the crystalline structure of stannite, and no oxygen was found in the material bulk. Prototype devices in substrate configuration were produced, and the new record efficiency (η = 0.92 %) for wet-synthesised Cu 2 MnSnS 4 was reached. Since the photovoltaic performances were poor despite the high quality of Cu 2 MnSnS 4 produced, the interface between the light absorber material and the buffer layer, CdS, was investigated, and its suitability to work as an efficient photovoltaic p-n junction was evaluated. We reveal that the buffer layer deposition procedure highly impacts the composition of the Cu 2 MnSnS 4 surface, and that band alignment between Cu 2 MnSnS 4 and CdS is unfavourable. The statements have been sustained by X-ray diffraction and Raman analysis, X-ray and ultraviolet photoelectron, electron paramagnetic resonance, and energy dispersive X-ray spectroscopies. • The synthesis optimized to control the manganese oxidation state has been reported. • Manganese loss due to CdS chemical bath deposition. • Cliff-like band alignment between Cu 2 MnSnS 4 and CdS.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Low-cost renewable electricity as the key driver of the global energy transition towards sustainability10.1016/j.energy.2021.120467 ↗
2. On the history and future of 100% renewable energy systems research10.1109/ACCESS.2022.3193402 ↗
3. 2023
4. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
5. Why PV panels must be recycled at the end of their economic life span? A case study on recycling together with the global situation10.1016/j.psep.2023.03.053 ↗
6. Progress and prospectives of solution-processed kesterite absorbers for photovoltaic applications10.1039/D3NR00218G ↗
7. 2023
8. CdTe-based thin film photovoltaics: recent advances, current challenges and future prospects10.1016/j.solmat.2023.112289 ↗
9. Lightweight and flexible Cu(In,Ga)Se2 solar minimodules: toward 20% photovoltaic efficiency and beyond10.1038/s41528-022-00224-1 ↗
10. Next generation thin-film solar absorbers based on chalcogenides10.1021/acs.chemrev.2c00346 ↗
11. Current challenges and future prospects for a highly efficient (>20%) kesterite CZTS solar cell: a review10.1016/j.solmat.2019.03.001 ↗
12. Kesterite solar cells: insights into current strategies and challenges
13. Review of critical materials for the energy transition, an analysis of global resources and production databases and the state of material circularity10.1016/j.mineng.2023.108282 ↗
14. Growth and characterization of Cu2Zn1−xFexSnS4 thin films for photovoltaic applications10.3390/ma13061471 ↗
15. New earth-abundant thin film solar cells based on chalcogenides10.3389/fchem.2019.00297 ↗
16. The kesterite–stannite structural transition as a way to avoid Cu/Zn disorder in kesterites: the exemplary case of the Cu2(Zn,Mn)SnSe410.1039/D2FD00042C ↗
17. Influence of annealing temperature on structural and optical properties of Cu2MnSnS4 thin films fabricated by sol–gel technique10.1016/j.jallcom.2015.03.225 ↗
18. A comparative study of Cu2MnSnS4 thin films synthesized via different chemical methods
19. Synthesis and characterization of earth-abundant Cu2MnSnS4 thin films using a non-toxic solution-based technique10.1039/C5RA14595C ↗
20. Photovoltaic effect in earth abundant solution processed Cu2MnSnS4 and Cu2MnSn(S,Se)4 thin films10.1016/j.solmat.2016.07.006 ↗
21. Growth of Cu2MnSnS4 PV absorbers by sulfurization of evaporated precursors10.1016/j.jallcom.2016.09.176 ↗
22. Relevant efficiency enhancement of emerging Cu2MnSnS4 thin film solar cells by low temperature annealing10.1016/j.solener.2017.03.087 ↗
23. Manganese-substituted kesterite thin-films for earth-abundant photovoltaic applications10.1016/j.solmat.2023.112247 ↗
24. Electrical conductivity in oxides of manganese and related compounds10.1016/0031-8914(61)90079-9 ↗
25. Visible light active single-crystal nanorod/needle-like α-MnO 2 @RGO nanocomposites for efficient photoreduction of Cr(VI)10.1021/acs.jpcc.6b10663 ↗
26. Synthesis of a thin-layer MnO2 nanosheet-coated Fe3O4 nanocomposite as a magnetically separable photocatalyst10.1021/la500726v ↗
27. Manganese compounds
28. Study of precursor-inks designed for high-quality Cu2ZnSnS4 films for low-cost PV application10.1002/slct.201900170 ↗
29. Semi-transparent Cu2ZnSnS4 solar cells by drop-casting of sol-gel ink10.1016/j.solener.2021.05.073 ↗
30. Liquid phase assisted grain growth in Cu2ZnSnS4 nanoparticle thin films by alkali element incorporation10.1039/C7RA13472J ↗
31. Band-gap tuning induced by germanium introduction in solution-processed kesterite thin films10.1021/acsomega.2c01786 ↗
32. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
33. Titania as buffer layer for Cd-free kesterite solar cells10.1021/acsmaterialslett.2c00933 ↗
34. Effect of the ZnSnO/AZO interface on the charge extraction in Cd-free kesterite solar cells10.3390/en16104137 ↗
35. Absolute work function measurement by using photoelectron spectroscopy10.1016/j.cap.2021.07.018 ↗
36. EasySpin, a comprehensive software package for spectral simulation and analysis in EPR10.1016/j.jmr.2005.08.013 ↗
37. Effect of a sulfur precursor on the hydrothermal synthesis of cu2mnsns410.3390/ma14133457 ↗
38. γ-MnS films with 3D microarchitectures: comprehensive study of the synthesis, microstructural, optical and magnetic properties10.1039/C7CE01536D ↗
39. Phase composition, microstructure, and optical properties of Cu2SnS3 thin films10.1007/s10812-020-01028-9 ↗
40. Effect of the stacking order, annealing temperature and atmosphere on crystal phase and optical properties of Cu2SnS310.1038/s41598-022-12045-3 ↗
41. Structural and electronic properties of Cu2MnSnS4 from experiment and first-principles calculations10.1002/pssb.201800743 ↗
42. Kesterite solar-cells by drop-casting of inorganic sol–gel inks10.1016/j.solener.2020.07.093 ↗
43. Study on adding ammonium hydrogen fluoride to improve manganese leaching efficiency of ammonia leaching low-grade rhodochrosite10.3390/met11091496 ↗
44. Ammonia uptake and release in the MnX2-NH3 (X = Cl, Br) systems and structure of the Mn(NH3)nX2 (n = 6, 2) ammines10.3390/cryst2020193 ↗
45. Solubility of a series of gases in cyclohexane and dimethylsulfoxide10.1021/j100865a043 ↗
46. Radical intermediates in photoinduced reactions on TiO2 (an EPR spin trapping study)10.3390/molecules191117279 ↗
47. Chemical instability at chalcogenide surfaces impacts chalcopyrite devices well beyond the surface10.1038/s41467-020-17434-8 ↗
48. Advanced analysis of copper X-ray photoelectron spectra10.1002/sia.6239 ↗
49. XPS analysis and structural characterization of CZTS thin films prepared using solution and vacuum based deposition techniques
50. XPS determination of Mn oxidation states in Mn (hydr)oxides10.1016/j.apsusc.2015.12.159 ↗
51. Calculation of multiplet structure of core p-vacancy levels10.1103/PhysRevB.10.71 ↗
52. Calculation of multiplet structure of core p-vacancy levels. II10.1103/PhysRevB.12.15 ↗
53. Identification of structural changes in CaCu3Ti4O12 on high energy ball milling and their effect on photocatalytic performance10.1039/D2CY01299E ↗
54. CsMnBr3: lead-free nanocrystals with high photoluminescence quantum yield and picosecond radiative lifetime10.1021/acsmaterialslett.0c00603 ↗
55. EPR absorption in α-MnS single crystals10.1016/0022-3697(68)90115-7 ↗
56. High temperature EPR linewidths in MnO and MnS10.1016/0375-9601(74)90409-5 ↗
57. Architectural control of magnetic semiconductor nanocrystals10.1021/ja016887w ↗
58. Germanium-gallium arsenide heterojunctions10.1147/rd.43.0283 ↗
59. Klein · Thin Solid Films · 2012 · 520 · 372110.1016/j.tsf.2011.10.055 ↗
60. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
61. The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface10.1002/sia.5095 ↗
62. Back and front contacts in kesterite solar cells: state-of-the-art and open questions
63. Cd-Free Cu2ZnSnS4 solar cell with an efficiency greater than 10% enabled by Al2O3 passivation layers10.1039/C9EE01726G ↗