journal article·2018-10

Balancing transformation and dissolution–crystallization for pure phase CH3NH3PbI3 growth and its effect on photovoltaic performance in planar-structure perovskite solar cells

Kai Sun, Ziyang Hu, Baihui Shen, Chunyan Lu, Cheng Yang, Can Gao, Jing Zhang, Yuejin Zhu

Publisher page

Abstract

Abstract In situ transformation and dissolution–crystallization mechanisms play a competing role in determining the characteristics of perovskite films that greatly affect the device performance of perovskite solar cells in the sequential two-step process. Herein, we develop a facile solution engineering to balance the transformation from PbI2 to CH3NH3PbI3 and dissolution–crystallization of CH3NH3PbI3 crystal growth, producing pure phase CH3NH3PbI3 crystals for high-efficient planar-structure solar cells. Low concentration of CH3NH3I in a mixed solvent of isopropanol/cyclohexane with low polarity is applied to suppress dissolution–crystallization (Ostwald ripening growth) of perovskite, while increases the transformation time from PbI2 to CH3NH3PbI3. Combination of porous PbI2 and temperature-assistance effectively promote the transformation from PbI2 to CH3NH3PbI3 and reduce the time of Ostwald ripening growth of perovskite. This solution engineering reconciles the complete PbI2 transformation and dissolution–crystallization of CH3NH3PbI3, resulting in a pure phase perovskite without any residual PbI2 in a short time. This strategy exemplified here can serve in the design and development of more sophisticated perovskites based on planar-structure applications without mesoporous TiO2 scaffold.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Efficient planar heterojunctionperovskite solar cells by vapour deposition10.1038/nature12509 ↗
3. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
4. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
5. Iodide management in formamidinium-lead-halide–basedperovskite layers for efficient solar cells10.1126/science.aan2301 ↗
6. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
7. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
8. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗
9. Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells10.1039/C5EE03560K ↗
10. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
11. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
12. Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid-state solar cells10.1002/adfm.201304022 ↗
13. Loading of mesoporous titania films by CH3NH3PbI3 perovskite, single step vs. sequential deposition10.1039/C4CC09556A ↗
14. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
15. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
16. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
17. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells10.1038/nnano.2014.181 ↗
18. Abnormal crystal growth in CH3NH3PbI3−xClx using a multi-cycle solution coating process10.1039/C5EE01179E ↗
19. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
20. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
21. Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites10.1039/C4EE01983K ↗
22. Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?10.1063/1.4895038 ↗
23. High-performance graphene-based hole conductor-free perovskite solar cells: Schottky junction enhanced hole extraction and electron blocking10.1002/smll.201403348 ↗
24. Film via a new approach for forming the PbI2 nanostructure together with strategically High CH3NH3I concentration for high efficient planar-heterojunction solar cells10.1002/aenm.201501354 ↗
25. The additive coordination effect on hybrids perovskite crystallization and high-performance solar cell10.1002/adma.201603021 ↗
26. Thermodynamic regulation of CH3NH3PbI3 crystal growth and its effect on photovoltaic performance of perovskite solar cells10.1039/C5TA03990H ↗
27. Crystal growth and dissolution of methylammonium lead iodide perovskite in sequential deposition: correlation between morphology evolution and photovoltaic performance10.1021/acsami.6b12303 ↗
28. Improved performance and thermal stability of perovskite solar cells prepared via a modified sequential deposition process10.1016/j.orgel.2016.11.014 ↗
29. Perovskite photovoltaics with outstanding performance produced by chemical conversion of bilayer mesostructured lead halide/TiO2 films10.1002/adma.201506049 ↗
30. Solution growth of single crystal methylammonium lead halide perovskite nanostructures for optoelectronic and photovoltaic applications10.1021/jacs.5b02651 ↗
31. Pressure-assisted CH3NH3PbI3 morphology reconstruction to improve the high performance of perovskite solar cells10.1039/C4TA06700B ↗
32. Synthesis and characterization of organic–inorganic perovskite thin films prepared using a versatile two-step dipping technique10.1021/cm970568f ↗
33. Formation mechanism of freestanding CH3NH3PbI3 functional crystals: in situ transformation vs dissolution–crystallization10.1021/cm5028817 ↗
34. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition10.1039/C4EE01624F ↗
35. Controllable sequential deposition of planar CH3NH3PbI3 perovskite films via adjustable volume expansion10.1021/acs.nanolett.5b00843 ↗
36. On the grain size and coalescence stress resulting from nucleation and growth processes during formation of polycrystalline thin films10.1557/JMR.1999.0424 ↗
37. Modified two-step deposition method for high-efficiency TiO2/CH3NH3PbI3 heterojunction solar cells10.1021/am502131t ↗
38. Unraveling the effect of PbI2 concentration on charge recombination kinetics in perovskite solar cells10.1021/ph500255t ↗
39. Improved perovskite morphology and crystallinity using porous PbI2 layers for efficient planar heterojunction solar cells10.1063/1.5012135 ↗
40. Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells10.1126/sciadv.aao5616 ↗
41. Two-step sequential deposition of organometal halide perovskite for photovoltaic application10.1002/adfm.201605654 ↗