journal article·2024-12

Optimizing strategy of bifacial TOPCon solar cells with front-side local passivation contact realized by numerical simulation

Zixiao Zhou, Qian Kang, Zhaoqing Sun, Yongcai He, Jingjie Li, Chang Sun, Chaowei Xue, Minghao Qu, Xiaoqing Chen, Zilong Zheng, Bo Wang, Hui Yan, Xixiang Xu, Yongzhe Zhang

Publisher page

Abstract

The tunnelling oxide passivation contact (TOPCon) solar cells have been impressive in the global photovoltaic (PV) market originating from their high efficiency and stability. However, it exhibits significant recombination losses due to its boron diffusion, laser damage and metal-semiconductor contact on front side. The bifacial TOPCon structure demonstrates massive potential in the improvement of passivation and contact performance with the premise that it can solve the parasitic absorption of polycrystalline silicon (poly-Si). In this study, the localized poly finger structure with excellent optics and passivation performance is designed in the front side of bifacial solar cells to compare with traditional TOPCon and full-area poly passivation devices. The theoretical efficiency and detailed power loss analysis in our simulation reveal that suppressing the recombination of FSF (front surface field) and the contact area is the crucial strategy to improve device performance, with optimized efficiency of 26.62 % and FF of 85.16 %. These results indicate that the route of BJ (back junction) structure containing localized selective contact and full coverage high-quality passivation holds potential in realizing both high J sc and V oc for FBC (front and back contact) solar cells, featuring great instructive significance for future industrialization of PV production.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. Tunnel oxide passivating electron contacts as full‐area rear emitter of high‐efficiency p‐type silicon solar cells10.1002/pip.2960 ↗
4. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
5. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
6. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
7. A polysilicon emitter solar cell10.1109/EDL.1985.26264 ↗
8. Polysilicon emitters for bipolar transistors: a review and re-evaluation of theory and experiment10.1109/16.141239 ↗
9. A 720 mV open circuit voltage SiO x : c -Si:SiO x double heterostructure solar cell10.1063/1.96331 ↗
10. Silicon‐based passivating contacts: the TOPCon route10.1002/pip.3522 ↗
11. Enhancing the reliability of TOPCon technology by laser-enhanced contact firing10.1016/j.solmat.2024.112846 ↗
12. Firing stability of n-type poly-Si on oxide junctions formed by quartz tube annealing
13. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
14. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
15. Screen-printable contacts for industrial N -TOPCon crystalline silicon solar cells10.1109/JPHOTOV.2021.3138248 ↗
16. The surface recombination velocity at boron doped emitters: comparison between various passivation techniques
17. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
18. Surface passivation of boron-diffused p-type silicon surfaces with (1 0 0) and (1 1 1) orientations by ALD Al2O3 layers10.1109/JPHOTOV.2012.2235525 ↗
19. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
20. Optimization of efficiency enhancement of TOPCon cells with boron selective emitter10.1016/j.solmat.2023.112585 ↗
21. Low-temperature fabrication of boron-doped amorphous silicon passivating contact as a local selective emitter for high-efficiency n-type TOPCon solar cells10.1016/j.nanoen.2024.109556 ↗
22. Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact10.1002/pip.2809 ↗
23. Laser ablation and Ni/Cu plating approach for tunnel oxide passivated contacts solar cells with variate polysilicon layer thickness: gains and possibilities in comparison to screen printing
24. Investigation of the defect distribution of laser contact opening applied to poly‐Si/SiN x stacks
25. Microscale contact formation by laser enhanced contact optimization10.1109/JPHOTOV.2021.3129362 ↗
26. Specific contact resistance and metallurgical process of the silver-based paste for making ohmic contact structure on the porous silicon/p-Si surface of the silicon solar cell10.1007/s10854-009-9986-0 ↗
27. Enhanced lateral current transport via the front N + diffused layer of n‐type high‐efficiency back‐junction back‐contact silicon solar cells10.1002/pip.862 ↗
28. Laser‐enhanced contact optimization on i TOPCon solar cells10.1002/pip.3598 ↗
29. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
30. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
31. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
32. On the limiting efficiency for silicon heterojunction solar cells10.1016/j.solmat.2021.111291 ↗
33. Light-trapping silicon solar cells-experimental results and analysis
34. Simplified device simulation of silicon solar cells using a lumped parameter optical model10.1109/JPHOTOV.2016.2528407 ↗
35. Surface recombination effects on the performance of n+p step and diffused junction silicon solar cells10.1016/0038-1101(81)90055-1 ↗
36. Improved silicon surface passivation by ALD Al2O3/SiO2 multilayers with in‐situ plasma treatments10.1002/admi.202202469 ↗
37. Simulation-based roadmap for the integration of poly-silicon on oxide contacts into screen-printed crystalline silicon solar cells10.1038/s41598-020-79591-6 ↗
38. Identification of embedded nanotwins at c-Si/a-Si:H interface limiting the performance of high-efficiency silicon heterojunction solar cells10.1038/s41560-020-00768-4 ↗
39. Annealing of silicon heterojunction solar cells: interplay of solar cell and indium tin oxide properties10.1109/JPHOTOV.2019.2924389 ↗
40. Improving the performance of industrial TOPCon solar cells through the insertion of intrinsic a-Si layer10.1016/j.solmat.2024.113024 ↗
41. A symmetrical condensed node for the TLM method10.1109/TMTT.1987.1133658 ↗
42. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
43. An expanded cox and strack method for precise extraction of specific contact resistance of transition metal oxide/n- silicon heterojunction10.1109/JPHOTOV.2019.2917386 ↗
44. Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al2O3 with SiNx capping10.1016/j.solmat.2020.110718 ↗
45. Dopant diffusion through ultrathin AlOx and AlOx/SiOx tunnel layer in TOPCon structure and its impact on the passivation quality on c-Si solar cells10.1016/j.solmat.2021.110970 ↗