journal article·2023-10

Regulation of phase arrangement in 2D ruddlesden-popper perovskite films via anti-solvent method for efficient solar cells

Yansheng Sun, Sai Ji, Chengjie Yu, Weifeng Liu, Kexiang Wang, Xiaonan Huo, Weiwei Sun, Ran Yin, Tingting You, Penggang Yin

Publisher page

Abstract

Recently, quasi-two-dimensional RP(Ruddlesden-Popper)-based perovskite solar cells have attracted a wide range of research interest. However, two-dimensional layered perovskites have disordered phase distribution and multi-quantum well structure that are adversely to charge transport and extraction, resulting in the inability to obtain relatively satisfactory photoelectric conversion efficiency (PCE). Here, we fabricated an 2D RP perovskite solar cell with reversely graded phase arrangement by friendly antisolvent method, and obtained the PCE of 14.45%. The dependence of efficiency on device architecture according to the vertical growth direction is further revealed and discussed. To investigate the effect of different antisolvents on crystal orientation and phase arrangement of GA-based 2D RP perovskites, we applied IPA as antisolvent and found that IPA not only significantly improved the surface roughness , quality and crystallinity of 2D perovskites but also reduce or even eliminate lower-n (n = 1, 2) phases and improve the vertical orientation of 2D phases in perovskites films, thereby improving charge transport and extraction. In the end, we achieved a champion PCE of 15.80%. These findings provide an effective guidance for developing GA-based organic spacers toward highly efficient and stable 2D PSCs with less quantum confinement.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
3. Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
4. Device performance of emerging photovoltaic materials (version 1)
5. Photovoltaics reaching for the shockley-queisser limit10.1021/acsenergylett.0c01790 ↗
6. Photovoltaic solar cell technologies: analysing the state of the art10.1038/s41578-019-0097-0 ↗
7. Toward efficient perovskite solar cells: progress, strategies, and perspectives10.1021/acsenergylett.2c00592 ↗
8. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
9. 2D hybrid halide perovskites: structure, properties, and applications in solar cells10.1002/smll.202103514 ↗
10. The 2D halide perovskite rulebook: how the spacer influences everything from the structure to optoelectronic device efficiency10.1021/acs.chemrev.0c01006 ↗
11. Band alignment boosts over 17% efficiency quasi-2D perovskite solar cells via bottom-side phase manipulation10.1021/acsenergylett.2c01453 ↗
12. Organic-salt-assisted crystal growth and orientation of quasi-2D ruddlesden–popper perovskites for solar cells with efficiency over 1910.1002/adma.202001470 ↗
13. 2D ruddlesden–popper perovskites for optoelectronics
14. Advances in two-dimensional organic-inorganic hybrid perovskites10.1039/C9EE03757H ↗
15. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability10.1002/anie.201406466 ↗
16. Observation of internal photoinduced electron and hole separation in hybrid two-dimensional perovskite films10.1021/jacs.6b12581 ↗
17. Over 21% efficiency stable 2D perovskite solar cells10.1002/adma.202107211 ↗
18. Cation diffusion guides hybrid halide perovskite crystallization during the gel stage10.1002/anie.201914183 ↗
19. High-efficiency two-dimensional ruddlesden-popper perovskite solar cells10.1038/nature18306 ↗
20. Orientation regulation of phenylethylammonium cation based 2D perovskite solar cell with efficiency higher than 11
21. Compositional and solvent engineering in dion–jacobson 2D perovskites boosts solar cell efficiency and stability10.1002/aenm.201803384 ↗
22. Uniform permutation of quasi-2D perovskites by vacuum poling for efficient, high-fill-factor solar cells10.1016/j.joule.2019.09.020 ↗
23. Stable layered 2D perovskite solar cells with an efficiency of over 19% via multifunctional interfacial engineering10.1021/jacs.0c13087 ↗
24. Water-assisted crystal growth in quasi-2D perovskites with enhanced charge transport and photovoltaic performance10.1002/aenm.202001832 ↗
25. Stable quasi-2D perovskite solar cells with efficiency over 18% enabled by heat–light Co-treatment10.1002/adfm.202004188 ↗
26. Efficient two-dimensional perovskite solar cells realized by incorporation of Ti3C2Tx MXene as nano-dopants10.1007/s40820-021-00602-w ↗
27. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications10.1039/C8CS00656C ↗
28. Unveiling the operation mechanism of layered perovskite solar cells
29. New type of 2D perovskites with alternating cations in the interlayer space, (C(NH2)3)(CH3NH3)nPbnI3n+1: structure, properties, and photovoltaic performance10.1021/jacs.7b09096 ↗
30. Manipulating the phase distributions and carrier transfers in hybrid quasi-two-dimensional perovskite films10.1002/solr.201800359 ↗
31. Origin of vertical orientation in two-dimensional metal halide perovskites and its effect on photovoltaic performance
32. In situ grazing-incidence wide-angle scattering reveals mechanisms for phase distribution and disorientation in 2D halide perovskite films10.1002/adma.202002812 ↗
33. Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells10.1016/j.nanoen.2017.07.046 ↗
34. Manipulating the film morphology evolution toward green solvent‐processed perovskite solar cells10.1002/sus2.36 ↗
35. Dual interfacial design for efficient CsPbI2Br perovskite solar cells with improved photostability10.1002/adma.201901152 ↗
36. E-beam evaporated Nb2O5 as an effective electron transport layer for large flexible perovskite solar cells10.1016/j.nanoen.2017.04.010 ↗
37. Discerning the surface and bulk recombination kinetics of organic–inorganic halide perovskite single crystals10.1002/aenm.201600551 ↗
38. 2-Thiopheneformamidinium-Based 2D ruddlesden–popper perovskite solar cells with efficiency of 16.72% and negligible hysteresis10.1002/aenm.202000694 ↗
39. Understanding the formation of vertical orientation in two-dimensional metal halide perovskite thin films10.1021/acs.chemmater.8b04531 ↗
40. Management of the crystallization in two-dimensional perovskite solar cells with enhanced efficiency within a wide temperature range and high stability10.1016/j.nanoen.2019.02.002 ↗
41. Phenethylammonium functionalization enhances near-surface carrier diffusion in hybrid perovskites10.1021/jacs.0c04377 ↗
42. Promoted oxygen reduction kinetics on nitrogen-doped hierarchically porous carbon by engineering proton-feeding centers10.1039/D0EE01613F ↗
43. Trap density determination by space ‐ charge ‐ limited currents
44. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
45. Merged interface construction toward ultra-low: V ocloss in inverted two-dimensional Dion-Jacobson perovskite solar cells with efficiency over 1810.1039/D1TA02015C ↗
46. Synergetic regulation of oriented crystallization and interfacial passivation enables 19.1% efficient wide-bandgap perovskite solar cells10.1002/aenm.202201509 ↗