journal article·2023-06

Optimization of Sn defects through multiple coordination effect to realize stable Sn–Pb mixed perovskite solar cells

Luyun Bai, Mina Guli, Yifan Yang, Qin Chen, Yujing Zhang

Publisher page

Abstract

Tin-lead (Sn–Pb) mixed perovskite solar cells (PSCs) with the advantage of low bandgap to photovoltaic application, have been developed well in recent years, but the poor stability and rapid crystallization of Sn–Pb perovskite cause the large open-circuit voltage (Voc) loss and defects. Here, we report a coordination effect to passivate Sn defects by adding 4-pyridine-methylamine iodine (PyAI) in perovskite precursor solution to optimize morphology and enhance the performance of Sn–Pb mixed PSCs. It`s found that multiple coordination bonds are formed in Sn–Pb mixed perovskite under the reaction of PyAI in an acid environment, which lead to modulate Sn–Pb mixed perovskite film formation process, improve film crystallinity, reduce electronic disorder, and optimize the overall film quality. As a result, 1.5%PyAI-treated Sn–Pb mixed PSCs exhibit the power conversion efficiency (PCE) improvement from 14.87% to 17.04% compared with the control Sn–Pb mixed PSCs. Moreover, the unencapsulated 1.5%PyAI-treated device maintains 80% of its initial performance after being stored in an N 2 -filled glove box for 15 days, also inhibitory effect of the oxidation process is obvious under the air environment condition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
2. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
3. Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
4. Design of low bandgap tin–lead halide perovskite solar cells to achieve thermal, atmospheric and operational stability10.1038/s41560-019-0471-6 ↗
5. Highly efficient Sn–Pb perovskite solar cell and high-performance all-perovskite four-terminal tandem solar cell10.1002/solr.201900396 ↗
6. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm 2 using surface-anchoring zwitterionic antioxidant
7. G. Kapil, T. Bessho, T. Maekawa, A.K. Baranwal, Y. Zhang, M.A. Kamarudin, D. Hirotani, Q. Shen, H. Segawa, S. Hayase, Tin-Lead Perovskite Fabricated via Ethylenediamine Interlayer Guides to the Solar Cell Efficiency of 21.74%, Adv. Energy Mater.. n/a (n.d.) 2101069. https://doi.org/10.1002/aenm.202101069.10.1002/aenm.202101069 ↗
8. All-perovskite tandem solar cells with improved grain surface passivation
9. J. Cao, H.-L. Loi, Y. Xu, X. Guo, N. Wang, C. Liu, T. Wang, H. Cheng, Y. Zhu, M.G. Li, W.-Y. Wong, F. Yan, High-performance tin-lead mixed perovskite solar cells with vertical compositional gradient, Adv. Mater.. n/a (n.d.) 2107729. https://doi.org/10.1002/adma.202107729.10.1002/adma.202107729 ↗
10. Strategies for improving the stability of tin-based perovskite (ASnX3) solar cells10.1002/advs.201903540 ↗
11. Importance of reducing vapor atmosphere in the fabrication of tin-based perovskite solar cells10.1021/jacs.6b10734 ↗
12. Mechanism of tin oxidation and stabilization by lead substitution in tin halide perovskites10.1021/acsenergylett.7b00636 ↗
13. Additive engineering for efficient and stable perovskite solar cells
14. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink10.1038/s41560-019-0466-3 ↗
15. formation of stable tin perovskites Co-crystallized with three halides for carbon-based mesoscopic lead-free perovskite solar cells10.1002/anie.201707037 ↗
16. The effects of doping density and temperature on the optoelectronic properties of formamidinium tin triiodide thin films10.1002/adma.201804506 ↗
17. Composition and interface engineering for efficient and thermally stable Pb–Sn mixed low-bandgap perovskite solar cells10.1002/adfm.201804603 ↗
18. Ethylenediammonium-based “hollow” Pb/Sn perovskites with ideal band gap yield solar cells with higher efficiency and stability10.1021/jacs.9b03662 ↗
19. Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells10.1126/science.aav7911 ↗
20. Highly efficient Sn/Pb binary perovskite solar cell via precursor engineering: a two-step fabrication process10.1002/adfm.201807024 ↗
21. Q. Chen, J. Wu, J.T. Matondo, L. Bai, D.M. Maurice, M. Guli, Optimization of Bulk Defects in Sn/Pb Mixed Perovskite Solar Cells through Synergistic Effect of Potassium Thiocyanate, Solar RRL. n/a (n.d.). https://doi.org/10.1002/solr.202000584.10.1002/solr.202000584 ↗
22. Additive engineering for Sn-based PSCs: enhancement of open-circuit voltage and fill factor10.1016/j.solener.2020.11.038 ↗
23. The effects of doping density and temperature on the optoelectronic properties of formamidinium tin triiodide thin films10.1002/adma.201804506 ↗
24. Tin versus lead redox chemistry modulates charge trapping and self-doping in tin/lead iodide perovskites10.1021/acs.jpclett.0c00725 ↗
25. Improving the performance of formamidinium and cesium lead triiodide perovskite solar cells using lead thiocyanate additives10.1002/cssc.201601027 ↗
26. Band gap tuning via lattice contraction and octahedral tilting in perovskite materials for photovoltaics10.1021/jacs.7b04981 ↗
27. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance10.1021/jacs.7b01815 ↗
28. Efficient passivation with lead pyridine-2-carboxylic for high-performance and stable perovskite solar cells10.1002/aenm.201901852 ↗
29. Coadditive engineering with 5-ammonium valeric acid iodide for efficient and stable Sn perovskite solar cells10.1021/acsenergylett.8b02216 ↗
30. Efficient passivation of hybrid perovskite solar cells using organic dyes with ⎕COOH functional group
31. 50% Sn-based planar perovskite solar cell with power conversion efficiency up to 13.6%10.1002/aenm.201601353 ↗
32. Reducing saturation-current density to realize high-efficiency low-bandgap mixed tin-lead halide perovskite solar cells
33. Photovoltaic mixed-cation lead mixed-halide perovskites: links between crystallinity, photo-stability and electronic properties10.1039/C6EE03014A ↗
34. Multiple passivation of electronic defects for efficient and stable perovskite solar cells10.1002/solr.202070114 ↗
35. Passivating charged defects with 1,6-hexamethylenediamine to realize efficient and stable tin-based perovskite solar cells10.1021/acs.jpcc.0c03401 ↗
36. Mitigating open-circuit voltage loss in Pb–Sn low-bandgap perovskite solar cells via additive engineering10.1021/acsaem.0c02895 ↗
37. Space‐charge‐limited currents in copper phthalocyanine thin films10.1063/1.1709998 ↗
38. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
39. Diammonium cations in the FASnI3 perovskite structure lead to lower dark currents and more efficient solar cells10.1021/acsenergylett.8b00687 ↗
40. Binary-metal perovskites toward high-performance planar-heterojunction hybrid solar cells10.1002/adma.201401641 ↗