Photovoltaic characterization of poly(2,5-bis(3-dodecylthiophen-2-yl)-2′,2″-biselenophene) for organic solar cells
Source abstract
Abstract
Abstract A novel regioregular selenophene and thiophene-based poly(2,5-bis(3-dodecylthiophen-2-yl)-2′,2″-biselenophene) (PBTBS), was chosen as promising electron donor materials blended with [6,6]-phenyl-C61 butyric acid methyl ester(PCBM) to fabricate bulk heterojunction solar cells. The optical and photovoltaic properties of PBTBS were characterized and compared to those of poly(3,3″′-didedocyl-quaterthiophene)( PQT-12). The PBTBS showed a higher ionization potential (IP) and improved oxidative stability than PQT-12 through the cyclic voltammetry (CV) measurements, which was due to stronger electron-donating properties of selenophene than that of thiophene analogue. A comparison of photovoltaic properties of cells between two polymer donors PBTBS and PQT-12 were also carried out. The result showed that cells based on the PBTBS had the comparable photovoltaic parameters with those of the PQT-12. An open voltage ( V OC ) of 0.46 V, a short-circuit current ( J SC ) of 0.17 mA/cm 2 , a fill factor ( FF ) of 0.32 and a power conversion efficiency ( η ) of 0.34% were achieved at 100 mW/cm 2 (AM 1.5). The external quantum efficiency of cells based on the PBTBS exhibited much better performance with around 3.4% at 540 nm compared with that of the PQT-12.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Organic light-emitting devices integrated with solar cells: high contrast and energy recycling
2. Poly(fluorenevinylene) derivative by gilch polymerization for light emitting diode applications10.1021/ma020671c ↗
3. Synthesis, characterization and optical and electrochemical properties of new 2,1,3-Benzoselenadiazole-based CT-type copolymers10.1021/ma051102i ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
5. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
6. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
7. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
8. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
9. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
10. X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
11. Soluble and processable regioregular poly(3-hexylthiophene) for thin film field-effect transistor applications with high mobility10.1063/1.117834 ↗
12. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
13. Efficient methano(70)fullerene/MDMO-PPV bulk heterojunction photovoltaic Cells10.1002/anie.200351647 ↗
14. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
15. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
16. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
17. Small bandgap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
18. Structurally ordered polythiophene nanoparticles for high-performance organic thin-film transistors10.1002/adma.200401660 ↗
19. Influence of alkyl substitution pattern in thiophene copolymers on composite fullerene solar cell performance10.1021/ma071649s ↗
20. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
21. Thiophene and selenophene copolymers incorporating fluorinated phenylene units in the main chain: synthesis, characterization, and application in organic field-effect transistors10.1021/cm051563i ↗
22. Organic field-effect transistors using di(2-thienyl)napthodithiophenes as active layers10.1246/cl.2002.958 ↗
23. Regioregular poly(3-hexyl) selenophene: a low band gap organic hole transporting polymer10.1039/b712398a ↗
24. Solution-processable field-effect transistor using a fluorene and selenophene-based copolymer as an active layer10.1021/ma060567l ↗
25. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
26. Stable polythiophene semiconductors incorporating Thieno[2,3-b]thiphene10.1021/ja043112p ↗
27. Synthesis and optically acid-Sensory and electrochemical properties of novel polyoxadiazole derivatives10.1021/ma035576y ↗