Energy and exergy analysis of PV modules: Sustainable improvements through fin structure and spray cooling
Source abstract
Abstract
Studies in the literature focused on improving photovoltaic energy performance through spray or fin cooling have inspired this study to investigate the combined effect of these methods using a temperature-controlled, water-saving spray technique. The temperature-controlled spraying technique aims to improve energy efficiency through efficient cooling and reduced water loss. The effects of cooling a photovoltaic module with a fin structure and improving cooling by a spray system on energy performance were experimentally tested on three modules: PV₁ works without cooling, PV₂ uses a fin structure, and PV₃ includes both a fin structure and spray cooling. The temperatures of the PV₂ and PV₃ modules are 1.59 % and 4.59 % lower, respectively, as contrasted to the PV₁ module. PV₁, PV₂, and PV₃ modules had energy efficiency of 12.7 %, 14.10 %, and 14.93 %, respectively, and exergy efficiencies of 8.25 %, 11.25 %, and 14.86 %, respectively. The PV₂ and PV₃ modules had a higher energy efficiency of 1.40 % and 2.20 %, respectively, and a higher exergy efficiency of 3 % and 6.61 %, compared to the PV₁ module. The fin structure with spray cooling improved the availability of renewable energy. The sustainability index of PV₁, PV₂ and PV₃ modules are 1.09, 1.13 and 1.17, respectively, which shows that the cooling effect reduces irreversibility and environmental degradation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. On PV module temperatures in tropical regions10.1016/j.solener.2012.11.001 ↗
2. Calculation of the polycrystalline PV module temperature using a simple method of energy balance10.1016/j.renene.2005.03.010 ↗
3. Comparing the performances of different cooling strategies to increase photovoltaic electric performance in different meteorological conditions10.1016/j.energy.2020.116950 ↗
4. Improving the effectiveness of a photovoltaic water pumping system by spraying water over the front of photovoltaic cells10.1016/j.renene.2008.03.024 ↗
5. Increased electrical yield via water flow over the front of photovoltaic panels10.1016/j.solmat.2004.01.011 ↗
6. Seasonal performances of photovoltaic cooling systems in different weather conditions10.1016/j.jclepro.2020.122459 ↗
7. Recent progresses and challenges in cooling techniques of concentrated photovoltaic thermal system: a review with special treatment on phase change materials (PCMs) based cooling10.1016/j.solmat.2022.111739 ↗
8. Experimental investigation of a low cost passive strategy to improve the performance of building integrated photovoltaic systems10.1016/j.solener.2014.11.001 ↗
9. New thermal management technique for PV module using Mist/PCM/Husk: an experimental study10.1016/j.jclepro.2023.136798 ↗
10. Modeling of a PV system by a back-mounted spray cooling section for performance improvement10.1016/j.apenergy.2022.120532 ↗
11. Year-round energy and exergy performance investigation of a photovoltaic panel coupled with metal foam/phase change material composite10.1016/j.renene.2022.03.071 ↗
12. Photovoltaic module efficiency enhancement system by novel cooling techniques: effect of phase change material and fins10.1016/j.psep.2024.06.105 ↗
13. Experimental study of using both ethylene glycol and phase change material as coolant in photovoltaic thermal systems (PVT) from energy, exergy and entropy generation viewpoints10.1016/j.energy.2018.07.069 ↗
14. Investigation on the operation performance of solar panels cooled by a natural draft cooling system
15. Investigating the cooling of solar photovoltaic modules under the conditions of Riyadh
16. Energy, exergy, economic, and enviroeconomic assessment of a photovoltaic module incorporated with a paraffin-metal foam composite: an experimental study10.1016/j.energy.2021.121807 ↗
17. Review of cooling techniques using phase change materials for enhancing efficiency of photovoltaic power systems10.1016/j.rser.2017.02.001 ↗
18. Numerical analysis in thermal management of high concentrated photovoltaic systems with spray cooling approach: a comprehensive parametric study10.1016/j.solener.2022.12.032 ↗
19. Experimental study of non-boiling heat transfer from a horizontal surface by water sprays10.1016/j.expthermflusci.2007.06.007 ↗
20. Optimization of operational parameters for a photovoltaic panel cooled by spray cooling10.1016/j.jestch.2021.04.002 ↗
21. An efficient pulsed- spray water cooling system for photovoltaic panels: experimental study and cost analysis10.1016/j.renene.2020.09.021 ↗
22. A novel thermal model for PV panels with back surface spray cooling10.1016/j.energy.2022.124401 ↗
23. Experimental investigation and exergy analysis of a high concentrating photovoltaic system integrated with spray cooling10.1016/j.enconman.2022.115957 ↗
24. Comparison of operation characteristics of a new spray cooling system based on PV/T and heat recovery in sow houses in five climate regions of China10.1016/j.enbuild.2023.113411 ↗
25. Exergetic, exergoeconomic, sustainability and environmental damage cost analyses of J85 turbojet engine with afterburner10.1515/tjj-2017-0019 ↗
26. Energy, exergy, sustainability, and emission analysis of industrial air compressors10.1016/j.jclepro.2019.05.158 ↗
27. Experimental study of active phase change cooling technique based on porous media for photovoltaic thermal management and efficiency enhancement10.1016/j.enconman.2019.111990 ↗
28. Role of exergy in increasing efficiency and sustainability and reducing environmental impact10.1016/j.enpol.2007.09.006 ↗
29. Design of an efficient solar energy harvesting system for wireless power communication10.1002/jnm.3054 ↗
30. Water spray cooling technique applied on a photovoltaic panel: the performance response10.1016/j.enconman.2015.10.079 ↗
31. Efficiency improvement of photovoltaic modules via back surface cooling10.3390/en14040895 ↗
32. Spraying cooling system for PV modules: experimental measurements for temperature trends assessment and system design feasibility10.3390/designs5020025 ↗
33. Experimental exergy analysis of water-cooled PV module10.1504/IJEX.2017.085768 ↗
34. A detailed review on the performance of photovoltaic/thermal system using various cooling methods
35. Performance enhancement of solar photovoltaic cells using effective cooling methods: a review10.1016/j.rser.2016.06.024 ↗
36. Innovative heat dissipation design incorporated into a solar photovoltaic thermal (PV/T) air collector: an optimization approach based on 9E analysis
37. Exergetic assessment of solar hydrogen production methods10.1016/j.ijhydene.2009.09.067 ↗
38. Sustainable assessment of solar hydrogen production techniques10.1016/j.energy.2012.03.029 ↗