journal article·2021-12Open access

Pulsed laser deposited and sulfurized Cu2ZnSnS4 thin film for efficient solar cell

Ju-Guang Hu, Tong Wu, Muhammad Ishaq, Umar Farooq, Shuo Chen, Zhuang-Hao Zheng, Zheng-Hua Su, Xiao-Dong Lin, Ping Fan, Hong-Li Ma, Xiang-Hua Zhang, Guang-Xing Liang

Abstract

Abstract Kesterite quaternary material Cu2ZnSnS4, (CZTS)-based thin-film solar cells have attracted intensive attention owing to their earth-abundant nature, stable thermodynamic structure, and large potential for high power conversion efficiency (PCE) defined by their suitable optoelectronic properties. As a widely used thin film preparation method, pulsed laser deposition (PLD) has not been fully studied in CZTS thin-film solar cell. Herein, a promising route based on PLD from a quaternary target and post-sulphuration for CZTS thin film was achieved. Through systematical investigation and optimization of substrate temperature, laser pulse energy, and sulfurization temperature, the CZTS thin films showed single kesterite structure, high (112) orientation, and dense polycrystalline grains with controlled composition. The CZTS thin-film solar cell exhibited a record PCE of 6.62%, the highest reported value when using pulsed laser deposited and sulfurized process, due to its lower series resistance, reduced grain boundary effects, superior interface quality, and a suitable depletion width. This research offers a facile and robust preparation method for CZTS films with enhanced photovoltaic properties and increased efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The 2020 photovoltaic technologies roadmap10.1088/1361-6463/ab9c6a ↗
2. Solar cell efficiency tables (version 49)10.1002/pip.2855 ↗
3. Optical properties of reactively sputtered Cu2ZnSnS4 solar absorbers determined by spectroscopic ellipsometry and spectrophotometry10.1016/j.solmat.2016.01.014 ↗
4. A study of energy band gap versus temperature for Cu2ZnSnS4 thin films10.1016/j.physb.2011.09.134 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
7. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
8. Obtaining phase-pure CZTS thin films by annealing vacuum evaporated CuS/SnS/ZnS stack10.1016/j.jcrysgro.2016.03.039 ↗
9. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
10. Performance limiting factors of Cu2ZnSn(SxSe1−x)4 solar cells prepared by thermal evaporation10.1016/j.solmat.2015.09.012 ↗
11. Growth of Cu2ZnSnS4 thin films using sulfurization of stacked metallic films10.1016/j.tsf.2010.03.058 ↗
12. Characterization of a Cu2ZnSnS4 solar cell fabricated by sulfurization of metallic precursor Mo/Zn/Cu/Sn10.1002/pssa.201431942 ↗
13. Investigation of blister formation in sputtered Cu2ZnSnS4 absorbers for thin film solar cells10.1116/1.4926754 ↗
14. Studies on the disorder in DC magnetron sputtered Cu2ZnSnS4(CZTS) thin films grown in sulfide plasma10.1016/j.surfcoat.2016.09.034 ↗
15. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
16. Solution-based synthesis of kesterite thin film semiconductors10.1088/2515-7655/ab3a81 ↗
17. High-efficiency ultra-thin Cu2ZnSnS4 solar cells by double-pressure sputtering with spark plasma sintered quaternary target10.1016/j.jechem.2021.01.026 ↗
18. Deposition of complex multielemental thin films10.1016/j.progsurf.2004.06.001 ↗
19. Norton · 2007 · 1
20. Fabrication of Cu2ZnSnS4 thin-film solar cell prepared by pulsed laser deposition10.1143/JJAP.46.5780 ↗
21. Cu2ZnSnS4 thin films annealed in H2S atmosphere for solar cell absorber prepared by pulsed laser deposition10.1143/JJAP.47.602 ↗
22. Pulsed laser deposition of Cu2ZnSnS4 thin films from single quaternary sulfide target prepared by combustion method10.1016/j.matlet.2016.04.046 ↗
23. Oxide route for production of Cu2ZnSnS4 solar cells by pulsed laser deposition10.1016/j.solmat.2020.110605 ↗
24. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
25. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
26. CuxSnSx+1(x = 2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering10.1002/pssc.200982746 ↗
27. Comparative study of the influence of two distinct sulfurization ramping rates on the properties of Cu2ZnSnS4 thin films10.1016/j.apsusc.2012.02.141 ↗
28. Effect of copper content and sulfurization process on optical, structural and electrical properties of ultrasonic spray pyrolysed Cu2ZnSnS4 thin films10.1016/j.matchemphys.2015.11.035 ↗
29. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
30. Ultra-thin Cu2ZnSnS4 solar cell by pulsed laser deposition10.1016/j.solmat.2017.03.002 ↗
31. Pure sulfide Cu2ZnSnS4 layers through a one-step low-temperature PLD technique: insight into simulation on modified back contact to overcome the barrier of MoS210.1016/j.mseb.2020.114701 ↗
32. Influence of the Cu2ZnSnS4 absorber thickness on thin film solar cells10.1002/pssa.201532311 ↗
33. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
34. Structural and opto-electronic features of pulsed laser ablation grown Cu2ZnSnS4 films for photovoltaic applications10.1016/j.jallcom.2015.10.214 ↗
35. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
36. Sze · 2007 · 77
37. Efficient copper‐doped antimony sulfide thin‐film solar cells via coevaporation method10.1002/solr.201900305 ↗
38. Moore · 2013 · 2013 · 3255
39. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
40. T. Kirchartz, K. Ding, U. Rau, Fundamental Electrical Characterization of Thin-Film Solar Cells, in: Advanced Characterization Techniques for Thin Film Solar Cells, pp. 33-60. https://doi.org/10.1002/9783527699025.ch2.10.1002/9783527636280.ch2 ↗
41. Defect engineering in earth‐abundant Cu2ZnSn(S,Se)4 photovoltaic materials via Ga3+‐doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
42. Electronic properties of the Cu2ZnSn(Se,S)4 absorber layer in solar cells as revealed by admittance spectroscopy and related methods10.1063/1.4729751 ↗
43. Electronic properties of the Cu2ZnSn(Se,S)4 absorber layer in solar cells as revealed by admittance spectroscopy and related methods10.1063/1.4729751 ↗
44. What makes a good solar cell?10.1002/aenm.201703385 ↗
45. Bifacial sodium-incorporated treatments: tailoring deep traps and enhancing carrier transport properties in Cu2ZnSnS4 solar cells10.1016/j.nanoen.2015.07.022 ↗
46. High open‐circuit voltage in full‐inorganic Sb2S3 solar cell via modified Zn‐doped TiO2 electron transport layer10.1002/solr.202000551 ↗
47. Elucidating the role of chlorine in perovskite solar cells10.1039/C7TA00973A ↗