Facilitate charge transfer at donor/acceptor interface in bulk heterojunction organic photovoltaics by two-dimensional nanoflakes
Source abstract
Abstract
Abstract Recently, two-dimensional (2D) materials have been applied in organic photovoltaics (OPVs) as electrode modifier or third component in bulk due to their high charge carrier mobility, various electronic band structure, and facile fabrication via liquid phase exfoliation. Herein, solution exfoliated few layers black phosphorus (BP) and tungsten diselenide (WSe2) were used as third component in bulk heterojunction OPVs, resulting in improved power conversion efficiencies (PCEs) from 8.60% for reference device, to 9.20% and 9.24% for devices based on BP and WSe2, respectively. Thorough study has been executed to look into the bulk morphology change and intermolecular charge transfer behavior within the OPV device by means of atomic force microscopy, grazing-incidence small-angle X-ray scattering, photoluminescence spectroscopy, and electrochemical impedance spectroscopy. Results show that a neat BHJ morphology and low energetic loss donor/acceptor (D/A) interfaces were achieved when incorporated with BP nanoflakes or WSe2 nanofalkes, leading to suppressed exciton recombination and enhanced charge transport property. Besides, more balanced bipolar carrier mobility within the bulk also helped boost the performance of OPVs. The storage and operating stabilities of the devices are also improved after incorporating with BPNFs or WSNFs. This work suggests the potential application of 2D materials as third component in OPV applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Fine-tuned photoactive and interconnection layers for achieving over 13% efficiency in a fullerene-free tandem organic solar cell10.1021/jacs.7b01493 ↗
2. Dithieno[3,2-b:2’,3’-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
3. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers10.1002/adma.201703973 ↗
4. Organic solar cells with an efficiency approaching 15%
5. A tandem polymer solar cell based on non-fullerene-acceptors yields an efficiency approaching 15%
6. An unfused-core-based nonfullerene acceptor enables high-efficiency organic solar cells with excellent morphological stability at high temperatures10.1002/adma.201705208 ↗
7. Aqueous solution-processed NiOx anode buffer layers applicable for polymer solar cells10.1002/pola.28427 ↗
8. Polymer solar cells10.1038/nphoton.2012.11 ↗
9. Efficient ternary blend polymer solar cells with a bipolar diketopyrrolopyrrole small molecule as cascade material10.1016/j.orgel.2015.06.043 ↗
10. Efficient and 1, 8-diiodooctane-free ternary organic solar cells fabricated via nanoscale morphology tuning using small-molecule dye additive10.1007/s12274-017-1589-0 ↗
11. Improved photon-to-electron response of ternary blend organic solar cells with a low band gap polymer sensitizer and interfacial modification10.1039/C5TA09727D ↗
12. High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency10.1039/C6EE03599J ↗
13. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
14. Highly efficient ternary-blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance10.1002/adma.201704271 ↗
15. Improving the efficiency of organic solar cell with a novel ambipolar polymer to form ternary cascade structure10.1016/j.solmat.2011.05.013 ↗
16. A near-infrared photoactive morphology modifier leads to significant current improvement and energy loss mitigation for ternary organic solar cells10.1002/advs.201800755 ↗
17. Graphene and its derivatives for solar cells application10.1016/j.nanoen.2018.02.047 ↗
18. Graphene-like two-dimensional materials10.1021/cr300263a ↗
19. Ternary solution-processed organic solar cells incorporating 2D materials10.1088/2053-1583/aa8440 ↗
20. Engineering crystalline structures of two-dimensional MoS2 sheets for high-performance organic solar cells10.1039/C4TA01336K ↗
21. Au nanoparticles on ultrathin MoS2 sheets for plasmonic organic solar cells10.1039/C4TA03178D ↗
22. Ultra-stable two-dimensional MoS2 solution for highly efficient organic solar cells10.1039/C4RA04116J ↗
23. Enhanced performance of polymer: fullerene bulk heterojunction solar cells upon graphene addition10.1063/1.4893777 ↗
24. Enhanced conduction and charge-selectivity by N-doped graphene flakes in the active layer of bulk-heterojunction organic solar cells10.1039/c3ee40963e ↗
25. Balancing light absorptivity and carrier conductivity of graphene quantum dots for high-efficiency bulk heterojunction solar cells10.1021/nn402606v ↗
26. Black phosphorus quantum dots used for boosting light harvesting in organic photovoltaics10.1002/anie.201707510 ↗
27. Size-tuning of WSe2 flakes for high efficiency inverted organic solar cells10.1021/acsnano.7b00323 ↗
28. From black phosphorus to phosphorene: basic solvent exfoliation, evolution of Raman scattering, and applications to ultrafast photonics10.1002/adfm.201502902 ↗
29. Solution-processable ultrathin black phosphorus as an effective electron transport layer in organic photovoltaics10.1002/adfm.201503273 ↗
30. Black phosphorus: synthesis and application for solar cells10.1002/aenm.201701832 ↗
31. Understanding S-shaped current-voltage characteristics in organic solar cells containing a TiOx interlayer with impedance spectroscopy and equivalent circuit analysis10.1021/jp305206d ↗
32. Polymer doping for high-efficiency perovskite solar cells with improved moisture stability10.1002/aenm.201701757 ↗
33. Effect of regioregularity on specific capacitance of poly(3-hexylthiophene)10.1016/j.electacta.2012.02.085 ↗
34. Electrical properties of the interfaces in bulk heterojunction organic solar cells investigated by electrochemical impedance spectroscopy10.1016/j.electacta.2013.07.152 ↗
35. High efficiency organic solar cells based on amorphous electron-donating polymer and modified fullerene acceptor10.1016/j.nanoen.2017.07.034 ↗
36. The role of driving energy and delocalized states for charge separation in organic semiconductors10.1126/science.1217745 ↗
37. Efficient charge generation by relaxed charge-transfer states at organic interfaces10.1038/nmat3807 ↗
38. Importance of the donor: fullerene intermolecular arrangement for high-efficiency organic photovoltaics10.1021/ja502985g ↗
39. Controlled conjugated backbone twisting for an increased open-circuit voltage while having a high short-circuit current in poly(hexylthiophene) derivatives10.1021/ja210954r ↗
40. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
41. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗