Blue photon management by inhouse grown ZnO:Al cathode for enhanced photostability in polymer solar cells
Source abstract
Abstract
Abstract We report the improvement in photostability of P3HT:PC60BM based bulk heterojunction solar cells deposited on Al-doped ZnO as a cathode layer replacing ITO as regularly used TCO in cells with N-I-P configuration. We experimentally and theoretically demonstrate that use of thicker ZnO:Al as cathode can successfully cut down the rate of photodegradation in short circuit current by ~40% and open circuit voltage by ~30% compared to the control device made on ITO based cathode. This effective reduction in photodegradation is understood to be coming from the absorption of ultraviolet and blue photon in the cathode layer itself. The loss in short circuit current due to the loss of blue photon in EQE is compensated by higher FF (lower series resistance) due to thicker ZnO:Al layer resulting in final device efficiency almost uncompromised with added benefit of reduced photo degradation. The experimental results are supported with optical simulations which show more absorption in the short wavelength region for the thicker ZnO films, compared to ITO films, deposited on glass substrates. This work also proposes using ZnO:Al cathode as a template for random textured front surface to potentially increase short circuit current by increase in photon absorption in active layer matrix by light scattering techniques. Our results provide an inexpensive pathway for improving the stability of organic photovoltaics without compromising the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
2. Influence of oxygen on semitransparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
3. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT: PCBM blend10.1016/j.solmat.2010.03.012 ↗
4. Oxygen doping-induced photogeneration loss in P3HT: PCBM solar cells10.1016/j.solmat.2012.01.012 ↗
5. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
6. Stability, degradation, and operational lifetimes of fully solution R2R processed flexible polymer solar cells
7. Degradation and stability of polymer and organic solar cells10.1016/j.solmat.2008.01.016 ↗
8. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
9. Radiation induced recombination centers in organic solar cells10.1103/PhysRevB.85.205211 ↗
10. Recombination through different types of localized states in organic solar cells10.1002/adfm.201200031 ↗
11. Photo-induced changes in fundamental properties of organic solar cells10.1063/1.4711806 ↗
12. Analysis of the failure mechanism for a stable organic photovoltaic during 10000 h of testing10.1002/pip.794 ↗
13. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
14. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
15. Pathways for the degradation of organic photovoltaic P3HT: PCBM based devices10.1016/j.solmat.2008.01.020 ↗
16. Atomic pathways underlying light-induced changes in organic solar cell materials10.1021/acs.jpcc.5b05234 ↗
17. More stable hybrid organic solar cells deposited on amorphous Si electron transfer layer10.1063/1.4878405 ↗
18. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
19. Highly efficient hybrid polymer and amorphous silicon multijunction solar cells with effective optical management10.1002/adma.201504483 ↗
20. Effect of a-Si:H–polymer interface on the behavior of hybrid solar cells10.1680/nme.13.00014 ↗
21. Kinetics of light induced defect creation in organic solar cells10.1063/1.4789993 ↗
22. Toward indium-free optoelectronic devices: dielectric/metal/dielectric alternative transparent conductive electrode in organic photovoltaic cells10.1002/pssa.201228089 ↗
23. High figure-of-merit Ag/Al: ZnO nano-thick transparent electrodes for indium-free flexible photovoltaics10.1016/j.solmat.2012.07.009 ↗
24. Indium-tin-oxide free transparent electrodes using a plasmon frequency conversion layer10.1039/C2TC00049K ↗
25. Inhalation carcinogenicity and chronic toxicity of indium-tin oxide in rats and mice10.1539/joh.10-0057-OA ↗
26. Indium-free transparent organic light emitting diodes with Al doped ZnO electrodes grown by atomic layer and pulsed laser deposition10.1063/1.2975176 ↗
27. Effect of annealing temperature on the structural and optical properties of ZnO thin films prepared by RF magnetron sputtering10.1016/j.physb.2010.01.039 ↗
28. Effects of H2O introduction during ZnO deposition by rf magnetron sputtering10.3938/jkps.53.3273 ↗
29. Thickness dependence of microstructural evolution of ZnO films deposited by rf magnetron sputtering10.1557/JMR.1998.0180 ↗
30. Structural evolution of ZnO films deposited by rf magnetron sputtering on glass substrate10.1002/pssa.200925131 ↗
31. A photonic-plasmonic structure for enhancing light absorption in thin film solar cells10.1063/1.3641469 ↗
32. Comparison of optical properties of periodic photonic–plasmonic and randomly textured back reflectors for nc-Si solar cells10.1016/j.jnoncrysol.2011.12.108 ↗
33. Enhanced nanocrystalline silicon solar cell with a photonic crystal back-reflector10.1016/j.solmat.2010.08.007 ↗
34. ITO-free inverted polymer solar cells with ZnO: Al cathodes and stable top anodes10.1016/j.solmat.2011.10.015 ↗
35. Influence of RF power on structural, morphology, electrical, composition and optical properties of Al-doped ZnO films deposited by RF magnetron sputtering
36. Effects of sputtering pressure and thickness on properties of ZnO:Al films deposited on polymer substrates10.1007/s10832-008-9523-1 ↗
37. Effects of argon pressure and r.f. power on magnetron sputtered aluminum doped ZnO thin films10.1016/j.jcrysgro.2014.02.028 ↗
38. Bhattacharya · 2013
39. Photonic band structures solved by a planewave based transfer-matrix method10.1103/PhysRevE.67.046607 ↗
40. Nano-crystalline silicon solar cell architecture with absorption at the classical 4n2 limit10.1364/OE.19.00A664 ↗
41. Nanophotonic organic solar cell architecture for advanced light trapping with dual photonic crystals10.1021/ph500124q ↗
42. Materion, 〈https://materion.com/resource-center/product-data-and-related-literature/inorganic-chemicals/oxides/azo-transparent-conductive-coating〉.
43. Interference method for the determination of the complex refractive index of thin polymer layers10.1063/1.2767232 ↗
44. Effective light trapping enhanced near-UV/blue light absorption in inverted polymer solar cells via sol–gel textured Al-doped ZnO buffer layer10.1016/j.solmat.2013.10.032 ↗