P-type semiconductor surfactant modified zinc oxide nanorods for hybrid bulk heterojunction solar cells
Source abstract
Abstract
In this work, hybrid bulk heterojunction solar cells based on surfactant-modified zinc oxide nanorods (ZnO NRs) blended with poly-(3-hexylthiophene) (P3HT) are presented. (E)-2-cyano-3-(5′-(4-(dibutylamino)styryl)-2,2′-bithiophen-5-yl)acrylic acid (1), a p-type semiconductor, is used as grafted interfacial surfactant on ZnO NRs, named 1-ZnO NRs, in order to improve simultaneously the nanoscale morphology of the hybrid polymer blend as well as the electronic properties of the heterojunction interface. Our studies reveal that the ligand modification of ZnO NRs leads to strongly improved aggregate free P3HT/ZnO blends that show five time increased power conversion efficiency and corresponding photo-generated charge carrier transport compared to untreated ZnO NRs. From transient absorption spectroscopy, it was found that recombination kinetics were similar in the device using untreated ZnO and modified 1-ZnO NRs, respectively, pointing to a major impact of the ligand in the improvement of the blend morphology. Corresponding device optimization led to improvements of FF and Voc to values comparable to P3HT blends using fullerene acceptors, but photocurrent density of the P3HT/1-ZnO solar cells was found low even after optimization. The latter could be addressed to destruction of long range organization of P3HT induced by the presence of the ZnO NRs as well as low electron transport inside the blend.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dispelling clichés at the nanoscale: the true effect of polymer electrolytes on the performance of dye-sensitized solar cells10.1039/C5NR02286J ↗
3. Composite films of carbon black nanoparticles and sulfonated-polythiophene as flexible counter electrodes for dye-sensitized solar cells10.1016/j.jpowsour.2015.10.028 ↗
4. Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices10.1016/j.electacta.2015.02.195 ↗
5. Solution and vapour deposited lead perovskite solar cells: ecotoxicity from a life cycle assessment perspective10.1016/j.solmat.2015.02.013 ↗
6. Hybrid Organic-nanocrystal solar cells10.1557/mrs2005.8 ↗
7. Poly(3-hexylthiophene):TiO2 nanocomposites for solar cell applications10.1088/0957-4484/15/9/008 ↗
8. Photoinduced electron transfer and photovoltaic response of a MDMO-PPV:TiO2 bulk-heterojunction10.1002/adma.200390022 ↗
9. Influence of solvent on film morphology and device performance of poly(3-hexylthiophene):TiO2 nanocomposite solar cells10.1016/j.cplett.2003.12.045 ↗
10. Hybrid polymer solar cells based on zinc oxide10.1039/b501979f ↗
11. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
12. Hybrid solar cells using a zinc oxide precursor and a conjugated polymer10.1002/adfm.200500201 ↗
13. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
14. Lead sulfide nanocrystal: conducting polymer solar cells10.1088/0022-3727/38/12/023 ↗
15. Monodisperse PbS nanocrystals synthesized in a conducting polymer10.1016/j.matlet.2006.01.007 ↗
16. Controlling the morphology of nanocrystal–polymer composites for solar cells10.1002/adfm.200390009 ↗
17. Photovoltaic devices using blends of branched CdSe nanoparticles and conjugated polymers10.1021/nl0342895 ↗
18. Vertically segregated hybrid blends for photovoltaic devices with improved efficiency10.1063/1.1804613 ↗
19. Employing end-functional polythiophene to control the morphology of nanocrystal-polymer composites in hybrid solar cells10.1021/ja0489184 ↗
20. High-efficiency hybrid solar cells based on polymer/PbSxSe1−x nanocrystals benefiting from vertical phase segregation10.1002/adma.201302340 ↗
21. Coordinatable and high charge-carrier-mobility water-soluble conjugated copolymers for effective aqueous-processed polymer–nanocrystal hybrid solar cells and OFET applications10.1002/adfm.201300333 ↗
22. Solid-state dye-sensitized and bulk heterojunction solar cells using TiO2 and ZnO nanostructures: recent progress and new concepts at the borderline10.1002/pi.3157 ↗
23. Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells10.1021/ja8079143 ↗
24. Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer10.1021/jp0571372 ↗
25. Hybrid photovoltaic devices of polymer and ZnO nanofiber composites10.1016/j.tsf.2005.08.179 ↗
26. Hybrid bulk heterojunction solar cells based on P3HT and porphyrin modified ZnO nanorods10.1021/jp911125w ↗
27. Controlled assembly of hybrid bulk-heterojunction solar cells by sequential deposition10.1021/jp0652852 ↗
28. Optimization of Si NC/P3HT hybrid solar cells10.1002/adfm.200902471 ↗
29. Hybrid solar cells with prescribed nanoscale morphologies based on hyperbranched semiconductor nanocrystals10.1021/nl062660t ↗
30. Poly(3-hexylthiophene)-CdSe quantum dot bulk heterojunction solar cells: influence of the functional end-group of the polymer10.1021/ma9006285 ↗
31. Self-organization of nanocrystals in polymer brushes. Application in heterojunction photovoltaic diodes10.1021/nl0505039 ↗
32. Charge separation and transport in conjugated-polymer/semiconductor-nanocrystal composites studied by photoluminescence quenching and photoconductivity10.1103/PhysRevB.54.17628 ↗
33. Hybrid bulk heterojunction solar cells based on poly (3-hexylthiophene) and Z907-modified ZnO nanorods10.1016/j.solmat.2013.10.026 ↗
34. Optimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells10.1016/j.solmat.2013.07.046 ↗
35. Oligothiophene self-assembly on the surface of ZnO nanorods: toward coaxial p–n hybrid heterojunctions10.1002/cphc.200900552 ↗
36. Interfacial engineering of P3HT/ZnO hybrid solar cells using phthalocyanines: a joint theoretical and experimental investigation10.1002/aenm.201301694 ↗
37. Optical performance and color investigations of hybrid solar cells based on P3HT:ZnO, PCPDTBT:ZnO, PTB7:ZnO and DTS(PTTh2)2:ZnO10.1016/j.solmat.2014.03.049 ↗
38. Hybrid heterojunction nanorods for nanoscale controlled morphology in bulk heterojunction solar cells10.1021/jp112369t ↗
39. α,ω-Distyryl-oligothiophenes: high mobility semiconductors for environmentally stable organic-thin film transistors10.1021/ja054358c ↗
40. Environmentally stable organic thin films transistors: terminal styryl vs central divinyl benzene building blocks for p-type oligothiophene semiconductors10.1016/j.orgel.2006.06.005 ↗
41. Influence of phenyl perfluorination on charge transport properties of distyryl-oligothiophenes in organic field-effect transistors10.1021/jp8049262 ↗
42. Nanostructure dependence of field-effect mobility in regioregular poly(3-hexylthiophene) thin film field effect transistors10.1021/ja055192i ↗
43. Microstructure-mobility correlation in self-organised, conjugated polymer field-effect transistors10.1016/S0379-6779(99)00326-4 ↗
44. Field effect transport and trapping in regioregular polythiophene nanofibers10.1021/jp047023a ↗
45. Effect of macromolecular parameters and processing conditions on supramolecular organisation, morphology and electrical transport properties in thin layers of regioregular poly(3-hexylthiophene)10.1016/j.synthmet.2006.04.012 ↗
46. Controlling the field-effect mobility of regioregular polythiophene by changing the molecular weight10.1002/adma.200305275 ↗