Thermally robust bulk heterojunction photocells based on PTB7:C70 composites
Source abstract
Abstract
Abstract Bulk heterojunction (BHJ) photocells using low energy-gap polymers such as poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7) and modified fullerenes such as [6,6]-phenyl-C 71 -butyric acid methyl ester (C 70 -PCBM) show relatively high power conversion efficiency. It is known that the thermal annealing, which effectively improves the photovoltaic performance of BHJ photocells with semi-crystalline polymers such as poly (3-hexylthiophene), is not applicable to BHJ photocells with amorphous-type polymers such as PTB7. In this study, it is found that PTB7:C 70 -PCBM BHJ photocells degrade shortly at 80 °C, which is within the range of the temperature shock cycling test condition specified in IEC 61646, the international standard for testing thin-film photovoltaic module. On the other hand, the photovoltaic performance of PTB7:C 70 BHJ photocells composite has been found to significantly improve after the thermal annealing at 160 °C. The results strikingly indicate not only that the lack of thermal robustness in PTB7:C 70 -PCBM BHJ photocells does not mainly arise from the nature of the polymer but the substituents of the fullerene used, but also that neat fullerenes should not be considered as just cheap and nasty substitutes of fullerene derivatives.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Manufacture, integration and demonstration of polymer solar cells in a lamp for the lighting Africa initiative10.1039/b918441d ↗
4. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Doping effect of buckminsterfullerene in conducting polymer: change of absorption spectrum and quenching of luminescence10.1016/0038-1098(92)90636-N ↗
7. Marked enhancement of photoconductivity and quenching of luminescence in poly(2,5-dialkoxy-p-phenylene vinylene) upon C60 doping10.1143/JJAP.32.L357 ↗
8. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
9. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
10. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
11. Chlorine-free synthesis: an overview10.1351/PAC-CON-12-02-02 ↗
12. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
13. Halogen-free solvent processing for sustainable development of high efficiency organic solar cells10.1016/j.orgel.2012.08.026 ↗
14. A transition solvent strategy to print polymer:fullerene films using halogen-free solvents for solar cell applications10.1016/j.orgel.2013.10.025 ↗
15. Yet another poor man’s green bulk heterojunction photocells: annealing effect and film composition dependence of photovoltaic devices using poly(3-hexylthiophene):C70 composites prepared with chlorine-free solvent10.1016/j.solmat.2012.09.014 ↗
16. Interplay between annealing temperature and optimum composition and fullerene aggregation effects in bulk heterojunction photocells based on poly(3-hexylthiophene) and unmodified C6010.1016/j.solmat.2013.08.033 ↗
17. Fullerene based n-type organic thin-film transistors10.1016/j.orgel.2005.06.002 ↗
18. Solution processible organic transistors and circuits based on a C70 methanofullerene10.1063/1.2034083 ↗
19. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
20. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
21. Bulk heterojunction photocells utilizing neat C70 and low energy-gap polymer prepared with halogen-free solvent10.1016/j.solmat.2013.06.004 ↗
22. Effect of conjugated polyelectrolyte interlayer at cathode in bulk heterojunction photocells based on neat C70 and low energy-gap polymer prepared with halogen-free solvent10.7567/APEX.7.051601 ↗
23. Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells10.1038/ncomms3867 ↗
24. Structure, dynamics, and power conversion efficiency correlations in a new low bandgap polymer: PCBM solar cell10.1021/jp909135k ↗
25. Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends10.1002/adfm.201102510 ↗
26. IEC 61646. Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval (2nd Ed). IEC Central Office: Geneva, Switzerland, 2008.
27. R: A language and environment for statistical computing, R Core Team, R Foundation for Statistical Computing, Vienna, Austria. (2013), 〈http://www.R-project.org/〉.
28. The R Commander: a basic statistics graphical user interface to R10.18637/jss.v014.i09 ↗
29. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
30. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
31. Molecular understanding of the open-circuit voltage of polymer:fullerene solar cells10.1002/aenm.201100549 ↗