Analyzing the effectiveness of various coatings to mitigate photovoltaic modules soiling in desert climate
Source abstract
Abstract
In this work, two different anti-soiling coatings (ASC) and anti-reflection coatings (ARC) were developed and tested under real operating conditions in Doha, Qatar, and compared with uncoated glass (UNC) to identify the best coating properties for mitigating solar photovoltaic (PV) module soiling. Soiling was measured in terms of loss in light transmittance, measured by UV–Vis spectroscopy, and increase in surface coverage area, measured using optical microscopy. The results indicate a decrease in light transmittance and an increase in surface coverage area over time due to dust accumulation. ASC coupons show higher hydrophilicity and, therefore, less soiling. ASC/ARC leads to a higher loss in light transmittance, while UNC results in a higher surface coverage area compared to the other coupons. Over 25 weeks of outdoor exposure and 12 cleaning cycles, analysis of 13,320 light microscopy images revealed mean dust surface coverage areas for ASC, ASC/ARC, and UNC glass coupons of 14.6 %, 13.6 %, and 15.8 %, respectively. Unlike the ASC/ARC and UNC coupons, the ASC recovers to its initial condition immediately after cleaning. Therefore, ASC was found to maintain a cleaner glass surface compared to ASC/ARC and UNC. However, the differences in transmittance loss among the three coupons are not significant. The results were compared to findings from similar studies conducted in Saudi Arabia to evaluate regional differences in coatings performance. For the same coatings, a significant light transmittance loss was measured in Doha (Qatar) compared to Uyaynah (Saudi Arabia). The combination of high humidity and heavy dust in Qatar's extreme conditions reduces the effectiveness of both ASC/ARC and ASC coatings. • Comparative analysis of anti-soiling coatings (ASC) and anti-reflection coatings (ARC) under real desert conditions in Qatar. • ASC exhibited the lowest soiling loss, while uncoated glass (UNC) showed the highest dust coverage. • The coatings' performance was affected by environmental parameters and location. • Findings provide insights for optimizing PV module coatings to enhance performance in Qatar, contributing to the advancement of solar energy technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Victoria · 2021
2. Sarver · 2013
3. Performance of monofacial and bifacial silicon heterojunction modules under desert conditions and the impact of PV soiling10.3390/su15108436 ↗
4. Investigation of solar PV performance under Doha weather using a customized measurement and monitoring system10.1016/j.renene.2015.12.046 ↗
5. Effect of dust on the transparent cover of solar collectors10.1016/j.enconman.2006.02.014 ↗
6. Self-cleaning transparent dust shields for protecting solar panels and other devices10.1080/02726350601146341 ↗
7. Experimental investigation of the impact of airborne dust deposition on the performance of solar photovoltaic (PV) modules10.1016/j.atmosenv.2011.04.084 ↗
8. Comparative analysis of energy produced by photovoltaic modules with anti-soiling coated surface in arid climates10.1016/j.apenergy.2013.01.048 ↗
9. Photovoltaic grid-connection system as load-shaving tool in Riyadh, Saudi Arabia10.1016/S0306-2619(99)00021-5 ↗
10. Optimal cleaning schedule in solar PV using the biography-based helianthus optimization enabled coupled deep network10.1016/j.solener.2023.112138 ↗
11. A comprehensive review of automatic cleaning systems of solar panels
12. Guerrero-Lemus · 2016
13. Vertical bifacial solar farms: physics, design, and global optimization10.1016/j.apenergy.2017.08.042 ↗
14. 2022
15. Outdoor performance of anti-soiling coatings in various climates of Saudi Arabia
16. Recent developments in multifunctional coatings for solar panel applications: a review10.1016/j.solmat.2018.09.015 ↗
17. Hydrophilic anti-soiling coating for improved efficiency of solar reflectors10.1063/1.5067223 ↗
18. Mimicking natural superhydrophobic surfaces and grasping the wetting process: a review on recent progress in preparing superhydrophobic surfaces10.1016/j.cis.2011.08.005 ↗
19. Soiling test methods and their use in predicting performance of photovoltaic modules in soiling environments
20. Anti-soiling coatings for solar cell cover glass: climate and surface properties influence10.1016/j.solmat.2018.05.036 ↗
21. Inkjet printing of metal oxide coatings for enhanced photovoltaic soiling environmental applications
22. Preparation and characterization of multilayer anti-reflective coatings via sol-gel process10.1016/j.ceramint.2017.11.088 ↗
23. The performance and durability of Anti-reflection coatings for solar module cover glass – a review10.1016/j.solener.2023.06.009 ↗
24. Optimized antireflection coatings for high-efficiency silicon solar cells10.1109/16.119035 ↗
25. Design and optimization of single, double and multilayer anti-reflection coatings on planar and textured surface of silicon solar cells
26. Preparation of wide-angle and abrasion-resistant multi-layer antireflective coatings by MgF2 and SiO2 mixed sol10.1016/j.colsurfa.2020.125106 ↗
27. Anti-reflective coated glass and its impact on bifacial modules' temperature in desert locations
28. Sol-gel preparation of self-cleaning SiO2-TiO2/SiO2-TiO2 double-layer antireflective coating for solar glass10.1016/j.rinp.2017.12.058 ↗
29. Afzal · 2021
30. Soiling, cleaning, and abrasion: the results of the 5-year photovoltaic glass coating field study10.1016/j.solmat.2024.113035 ↗
31. Abrasion of PV antireflective coatings by robot cleaning10.1109/JPHOTOV.2024.3414192 ↗
32. Recent Advances in durability of superhydrophobic self-cleaning technology: a critical review
33. Advanced performance testing of anti-soiling coatings – Part I: sequential laboratory test methodology covering the physics of natural soiling processes10.1016/j.solmat.2019.110048 ↗
34. Investigation of thermal and electrical performances of a combined semi-transparent PV-vacuum glazing10.1016/j.apenergy.2018.07.040 ↗
35. Advanced performance testing of anti-soiling coatings - Part II: particle-size dependent analysis for physical understanding of dust removal processes and determination of adhesion forces10.1016/j.solmat.2019.110049 ↗
36. Soiling in solar energy systems: the role of the thresholding method in image analysis
37. Reducing cracks and delamination in plasma-sprayed coatings of calcia and magnesia stabilized-zirconia10.1017/S1431927621008497 ↗
38. Various types of anti-reflective coatings (ARCS) Based on the layer composition and surface topography: a review10.1515/rams-2018-0013 ↗
39. Self-cleaning surfaces using the Lotus effect10.1016/B978-044451664-0/50024-3 ↗
40. Correlation between laboratory and outdoor soiling experiments with anti-soiling coatings10.1016/j.solmat.2024.112751 ↗