journal article·2024-12Open access

Failure modes of silicon heterojunction photovoltaic modules in damp heat environment: Sodium and moisture effects

Lucie Pirot-Berson, Romain Couderc, Romain Bodeux, Julien Dupuis

Abstract

Silicon heterojunction (SHJ) solar cells are expected to gain significant market share in the coming years. In the field, among identified degradation modes, moisture-induced degradation can be a significant concern for this solar cell technology and should be monitored. This work investigates the moisture-induced degradation mechanisms in SHJ cells encapsulated in different module configurations. Damp heat (DH) testing was performed under IEC 61215 standard conditions (85 °C and 85% relative humidity) for up to 2000 h. Different degradation mechanisms are identified after DH aging, due to moisture alone or in combination with sodium ions originating from photovoltaic glass leaching. Under the influence of moisture, these ions can migrate into the cell and degrade the cell passivation, resulting in massive power losses up to 57.6% of the initial value after 1500 h of DH aging. By using other types of glass, glass-glass module configurations show less than 3% of power losses after 2000 h of DH aging. The front side of the cell is much more sensitive than the rear side where the emitter of the cell is. After highlighting the impact of sodium, moisture alone was studied with a module configuration without glass. In that case, the degradation is characterized by increased series resistance without passivation losses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. 2024
2. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
3. Casey
4. Underdense a-Si:H film capped by a dense film as the passivation layer of a silicon heterojunction solar cell10.1063/1.4966941 ↗
5. The value of stability in photovoltaics10.1016/j.joule.2021.10.019 ↗
6. Long-term performance and reliability of silicon heterojunction solar modules10.1002/pip.3688 ↗
7. IEC 61215 : Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval.”.
8. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
9. Damp-heat-stable, high-efficiency, industrial-size silicon heterojunction solar cells10.1016/j.joule.2020.03.003 ↗
10. A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress
11. Glass and other encapsulation materials (chapter 4)10.1016/B978-0-12-381343-5.00004-5 ↗
12. Potential-induced degradation in photovoltaic modules: a critical review10.1039/C6EE02271E ↗
13. Interdiffusion of hydrogen and alkali ions in a glass surface10.1016/0022-3093(75)90079-4 ↗
14. Investigation of damp heat effects on glass properties for photovoltaic applications10.1080/1478422X.2016.1234803 ↗
15. Highly crystallized tungsten doped indium oxide film stabilizes silicon heterojunction solar cells in sodium environment10.1016/j.solmat.2021.111387 ↗
16. Potential-free sodium-induced degradation of silicon heterojunction solar cells10.1002/pip.3698 ↗
17. Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride10.1016/j.solmat.2023.112554 ↗
18. Addressing sodium ion-related degradation in SHJ cells by the application of nano-scale barrier layers10.1016/j.solmat.2023.112604 ↗
19. Four failure modes in silicon heterojunction glass-backsheet modules10.1016/j.solmat.2023.112358 ↗
20. O. Arriaga Arruti, L. Gnocchi, Q. Jeangros, C. Ballif, and A. Virtuani, “Potential-induced degradation in bifacial silicon heterojunction solar modules: insights and mitigation strategies,” Prog. Photovoltaics Res. Appl., vol. n/a, no. n/a, doi: 10.1002/pip.3765.10.1002/pip.3765 ↗
21. Electrical and mechanical reliability and failure mechanism analysis of electrically conductive adhesives10.1016/j.microrel.2023.115236 ↗
22. Sterpenich · 1998 · vol. 1
23. Internal quantum efficiency for solar cells10.1016/j.solener.2007.07.010 ↗
24. Balance of efficiency and stability of silicon heterojunction solar cells10.1016/j.solmat.2022.111801 ↗
25. Environmental failure of structural adhesive joints10.1080/00218467408075035 ↗
26. Effect of moisture on the tensile properties of poly(hydroxy ester ether)10.1016/S0032-3861(00)00836-3 ↗