Hydrothermally deposited Sb2S3 absorber, and a Sb2S3/CdS solar cell with VOC approaching 800 mV
Source abstract
Abstract
We report the hydrothermal deposition of Sb 2S 3 thin film on top of CdS buffer layer, and the fabrication of prototype photovoltaic devices utilizing spiro-OMeTAD as the hole transport layer. The as-deposited films were amorphous, which transformed to polycrystalline after thermal processing. The pristine films were annealed at different temperatures and showed effective recrystallization at 350 °C which resulted in larger grains, intense XRD patterns, and significantly improved device parameters. The obtained V OC of 795 mV is among the highest reported for a Sb 2S 3 based solar cell. Deep level transient spectroscopy studies detected an electron trap with activation energy 0.61 eV in the pristine annealed absorber, which became deeper (0.66 eV) upon Na incorporation. However, the capture cross-section decreased by an order of magnitude, and the trap density halved. The reduction in the capture cross-section and trap density for the Na-incorporated device coincides with the improved EQE response in the mid- and long-wavelength regions and a 9 % increase in device efficiency. The light intensity dependence of V OC clearly demonstrated that Na incorporation reduced the trap-assisted recombination and facilitated efficient charge transport in the device.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Quasiepitaxy strategy for efficient full‐inorganic Sb2S3 solar cells10.1002/adfm.201901720 ↗
2. Highly improved Sb2S3 sensitized‐inorganic–organic heterojunction solar cells and quantification of traps by deep‐level transient spectroscopy10.1002/adfm.201304238 ↗
3. Surfactant-mediated self-assembly of Sb2S3 nanorods during hydrothermal synthesis10.1557/jmr.2016.470 ↗
4. Sb2S3 thin films by ultrasonic spray pyrolysis of antimony ethyl xanthate10.1016/j.mssp.2021.106209 ↗
5. Controllable (hk 1) preferred orientation of Sb2S3 thin films fabricated by pulse electrodeposition10.1016/j.solmat.2023.112208 ↗
6. Low processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defects10.1016/j.solmat.2022.112139 ↗
7. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
8. Detailed balance limit of the efficiency of tandem solar cells10.1088/0022-3727/13/5/018 ↗
9. Design and analysis of Sb2S3/Si thin film tandem solar cell10.1016/j.solmat.2023.112210 ↗
10. In situ growth of [hk1]‐oriented Sb2S3 for solution‐processed planar heterojunction solar cell with 6.4% efficiency10.1002/adfm.202002887 ↗
11. Toward high‐efficiency solution‐processed planar heterojunction Sb2S3 solar cells10.1002/advs.201500059 ↗
12. Composition engineering of Sb2S3 film enabling high performance solar cells10.1016/j.scib.2018.12.013 ↗
13. Alkali metals doping for high‐performance planar heterojunction Sb2S3 solar cells10.1002/solr.201800272 ↗
14. Solution-processed Sb2S3 planar thin film solar cells with a conversion efficiency of 6.9% at an open circuit voltage of 0.7 V achieved via surface passivation by a SbCl3 interface layer10.1021/acsami.9b15148 ↗
15. Boosting conversion efficiency by bandgap engineering of ecofriendly antimony trisulfide indoor photovoltaics via a modeling approach10.1016/j.solmat.2024.112961 ↗
16. Highly reproducible planar Sb 2 S 3-sensitized solar cells based on atomic layer deposition10.1039/C4NR04148H ↗
17. A chemical precursor for depositing Sb 2 S 3 onto mesoporous TiO 2 layers in nonaqueous media and its application to solar cells10.1039/c2dt31348k ↗
18. Optical and structural properties in the amorphous to polycrystalline transition in Sb2S3 thin films10.1088/0022-3727/40/8/005 ↗
19. From flat to nanostructured photovoltaics: balance between thickness of the absorber and charge screening in sensitized solar cells10.1021/nn204382k ↗
20. Chen · ACS Energy Lett. · 2020 · 5 · 229410.1021/acsenergylett.0c00940 ↗
21. Doping effects in Sb2S3 absorber for full-inorganic printed solar cells with 5.7% conversion efficiency10.1016/j.ijhydene.2013.02.069 ↗
22. Cadmium-free ZnS interfacial layer for hydrothermally processed Sb2S3 solar cells10.1016/j.solener.2021.06.037 ↗
23. Low cost Schottky barrier solar cells fabricated on CdSe and Sb2 S 3 films chemically deposited with silicotungstic acid10.1149/1.2059248 ↗
24. Hydrothermally deposited antimony sulfide solar cells with $\mathrm {V} _ {\text {OC}} $ approaching 800 mV
25. Post‐annealing treatment on hydrothermally grown antimony sulfoselenide thin films for efficient solar cells10.1002/solr.202201009 ↗
26. The Scherrer equation versus the'Debye-Scherrer equation10.1038/nnano.2011.145 ↗
27. High open‐circuit voltage in full‐inorganic Sb2S3 solar cell via modified Zn‐doped TiO2 electron transport layer10.1002/solr.202000551 ↗
28. Pokhrel · 2022
29. Laser-induced transformation of stibnite (Sb2S3) and other structurally related salts10.1016/j.vibspec.2013.07.007 ↗
30. Antimony sulfide thin films prepared by laser assisted chemical bath deposition10.1016/j.apsusc.2016.10.051 ↗
31. Structural, morphological and spectroscopic ellipsometry studies on sputter deposited Sb2S3 thin films10.1007/s10854-016-5033-0 ↗
32. Raman spectra of isolated and interconnected pyramidal XS3 groups (X= Sb, Bi) in stibnite, bismuthinite, kermesite, stephanite and bournonite10.1127/0935-1221/2009/0021-1914 ↗
33. Heterojunction CdS/Sb2S3 solar cells using antimony sulfide thin films prepared by thermal evaporation10.1016/j.tsf.2014.08.024 ↗
34. Thickness effect on the structural and optical constants of stibnite thin films prepared by sulfidation annealing of antimony films10.1016/j.ijleo.2013.10.114 ↗
35. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
36. On charge carrier recombination in Sb2S3 and its implication for the performance of solar cells10.1021/jp4072394 ↗
37. Trap and transfer. Two-step hole injection across the Sb2S3/CuSCN interface in solid-state solar cells10.1021/nn403058f ↗
38. Effect of different hole transport materials on recombination in CH3NH3PbI3 perovskite-sensitized mesoscopic solar cells10.1021/jz400638x ↗