Comparison of polycrystalline and epitaxial Cu(In, Ga)Se2 solar cells with conversion efficiencies of more than 21%
Source abstract
Abstract
Polycrystalline Cu(In,Ga)Se 2 (CIGS) solar cells are widely studied for their application in thin-film photovoltaics, but analysis of their crystalline properties is difficult owing to the presence of grain boundaries and defects. Epitaxial CIGS (epi-CIGS) solar cells can potentially address the issues of polycrystalline CIGS (poly-CIGS) solar cells, but their conversion efficiency has not been widely studied. We fabricated epi-CIGS layers using techniques developed for high-efficiency ploy-CIGS solar cells such as Ga grading, Na doping, and heat-light soaking. Here, scanning transmission electron microscopy and secondary ion mass spectrometry were used to compare the structural characteristics of poly- and epi-CIGS solar cells with conversion efficiencies of more than 21%. Both types of solar cells had similar Ga gradient profiles, and abrupt interfaces were observed between the CIGS and Mo, CIGS and GaAs, and CdS and CIGS layers. The poly-CIGS layer had a higher Na concentration than the epi-CIGS layer because the grain boundaries of the former included high concentrations of Na ions. Meanwhile, the Na ions in the epi-CIGS layer promoted the interdiffusion of In and Ga. For both types of solar cells, heat-light soaking increased the carrier concentration by more than 1 × 10 17 cm −3. These observations suggest that grain boundaries are not the main factor limiting the conversion efficiency of poly-CIGS solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. CIGS absorbers and processes10.1002/pip.969 ↗
2. Physical and chemical aspects at the interface and in the bulk of CuInSe2-based thin-film photovoltaics10.1039/D1CP04495H ↗
3. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
4. Enhanced efficiency of Cd-free Cu(In,Ga)(Se,S)2 minimodule via (Zn,Mg)O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
5. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
6. Advanced alkali treatments for high-efficiency Cu(In,Ga)Se2 solar cells on flexible substrates10.1002/aenm.201900408 ↗
7. Heavy alkali treatment of Cu(In,Ga)Se2 solar cells: surface versus bulk effects10.1002/aenm.201903752 ↗
8. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.610.1002/pssr.201600199 ↗
9. Microscopic origins of performance losses in highly efficient Cu(In,Ga)Se2 thin-film solar cells10.1038/s41467-020-17507-8 ↗
10. Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se2 solar cells10.1002/pip.3033 ↗
11. Improved efficiency of Cu(In,Ga)Se2 mini-module via high-mobility In2O3:W,H transparent conducting oxide layer10.1002/pip.3123 ↗
12. A comparative study of the effects of light and heavy alkali-halide postdeposition treatment on CuGaSe2 and Cu(In,Ga)Se2 thin-film solar cells10.1016/j.solener.2020.10.048 ↗
13. Annealing effects on Cu(In,Ga)Se2 solar cells irradiated by high-fluence proton beam10.35848/1347-4065/acc53b ↗
14. 2023
15. 2023
16. High-efficiency CuInxGa1-xSe2 solar cells made from (Inx,Ga1-x)2Se3 precursor films10.1063/1.112670 ↗
17. Heteroepitaxy and characterization of CuInSe2 on GaAs(001)10.1016/0022-0248(95)80129-Z ↗
18. Excitonic emissions from CuInSe2 on GaAs(001) grown by molecular beam epitaxy10.1063/1.114400 ↗
19. High quality CuInSe2 films grown on pseudo-lattice-matched substrates by molecular beam epitaxy10.1063/1.117793 ↗
20. Hole transport and doping states in epitaxial CuIn1-xGaxSe210.1063/1.366860 ↗
21. Growth of CuGaSe2 layers on closely lattice-matched GaAs substrates by migration-enhanced epitaxy10.1143/JJAP.50.125502 ↗
22. Successful growth of Cu2Se-free CuGaSe2 by migration-enhanced epitaxy10.1116/1.3690456 ↗
23. Characteristics of CuGaSe2 layers grown on GaAs substrates10.1016/j.jcrysgro.2012.12.171 ↗
24. Sodium enhances indium-gallium interdiffusion in copper indium gallium diselenide photovoltaic absorbers10.1038/s41467-018-03115-0 ↗
25. Epitaxial CuInSe2 thin films grown by molecular beam epitaxy and migration enhanced epitaxy10.1016/j.jcrysgro.2017.07.010 ↗
26. Migration-enhanced epitaxy of GaAs and AlGaAs10.1143/JJAP.27.169 ↗
27. Single-crystal Cu(In,Ga)Se2 solar cells grown on GaAs substrates10.7567/APEX.11.082302 ↗
28. Crystalline characteristics of epitaxial Cu(In,Ga)Se2 layers on GaAs (001) substrates
29. Effects of alkali-metal incorporation into epitaxial Cu(In,Ga)Se2 solar cells prepared by molecular beam epitaxy10.1016/j.tsf.2021.139034 ↗
30. Optoelectronic inactivity of dislocations in Cu(In,Ga)Se2 thin films
31. Effects of long-term heat-light soaking on Cu(In,Ga)Se2 solar cells with KF postdeposition treatment10.7567/APEX.10.092301 ↗
32. Significance of metastable acceptors in Cu(In,Ga)Se2 solar cells in accelerated lifetime testing, Jpn10.7567/JJAP.57.092301 ↗
33. Optical and structural properties of high-efficiency epitaxial Cu(In,Ga)Se2 grown on GaAs10.1021/acsami.9b18040 ↗
34. CIGS thin films, solar cells, and submodules fabricated using a rf-plasma cracked Se-radical beam source10.1016/j.tsf.2010.12.037 ↗
35. Texture and morphology variations in (In,Ga)2Se3 and Cu(In,Ga)Se2 thin films grown with various Se source conditions10.1002/pip.1227 ↗
36. Magnesium- and calcium-doping behavior in molecular-beam epitaxial III-V compounds10.1063/1.331248 ↗
37. Observations on Bayard-Alpert ion gauge sensitivities to various gasses10.1116/1.1316382 ↗
38. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
39. Diode quality factor determination for thin-film solar cells10.1016/0379-6787(89)90050-1 ↗
40. MoSe2 layer formation at Cu(In,Ga)Se2/Mo Interfaces in high efficiency Cu(In1-xGax)Se2 solar cells10.1143/JJAP.37.L71 ↗
41. Structural and compositional analyses of Cu(In,Ga)Se2 thin film solar cells with different cell performances10.1116/1.4943518 ↗
42. Diffusion of Rb in polycrystalline Cu(In,Ga)Se2 layers and effect of Rb on solar cell parameters of Cu(In,Ga)Se2 thin-film solar cells10.1063/1.5044629 ↗
43. Investigation of the diffusion behavior of sodium in Cu(In,Ga)Se2 layers10.1063/1.4871457 ↗
44. Effect of Cu‐deficient layer formation in Cu(In,Ga)Se2 solar‐cell performance10.1002/pip.2972 ↗
45. Real-time study of Ga diffusion processes during the formation of Cu(In,Ga)Se2: the role of Cu and Na content10.1016/j.solmat.2013.04.008 ↗
46. Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells10.1016/S0022-3697(03)00127-6 ↗
47. Revani diffusion model in Cu(In,Ga)Se210.1039/D3TA03690A ↗
48. The fox and the hound: in-depth and in-grain Na doping and Ga grading in Cu(In,Ga)Se2 solar cells10.1039/D0TA01103G ↗
49. Lightweight and flexible Cu(In,Ga)Se2 solar minimodules: toward 20% photovoltaic efficiency and beyond10.1038/s41528-022-00224-1 ↗
50. Light- and bias-induced metastabilities in Cu(In,Ga)Se2 based solar cells caused by the (VSe - VCu) vacancy complex10.1063/1.2388256 ↗
51. Persistent photoconductivity in Cu(In,Ga)Se2 heterojunctions and thin films prepared by sequential deposition10.1063/1.121762 ↗
52. Metastabilities in the electrical characteristics of CIGS devices: experimental results vs theoretical predictions10.1016/j.tsf.2006.12.038 ↗
53. Quantifying large lattice relaxations in photovoltaic devices10.1103/PhysRevApplied.13.024025 ↗
54. Light-induced changes in the minority carrier diffusion length of Cu(In,Ga)Se2 absorber material10.1016/j.solmat.2017.01.045 ↗
55. AIST and Gifu University