Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell
Source abstract
Abstract
Monolithic perovskite/silicon tandem photovoltaics have fueled major research efforts as well as gaining rapid industrial interest. So far, most of the literature has focused on the use of currently more expensive silicon heterojunction bottom cell technology. This work demonstrates a perovskite/silicon tandem solar cell based on the industrially dominant passivated emitter and rear cell (PERC) technology. In detail, we investigate a tunnel recombination junction (TRJ) consisting of ITO/NiO/2-(9H-carbazol-9-yl)ethyl] phosphonic acid (2PACz) and compare it with an ITO/2PACz TRJ. Specifically, the NiO layer is deposited by atomic layer deposition (ALD). Although ITO/2PACz-based tandem devices can reach more than 24% conversion efficiency, we observe that they suffer from a large spread in photovoltaic parameters due to electrical shunts in the perovskite top cell, caused by the inhomogeneity of the 2PACz layer on ITO. Instead, when ALD NiO is sandwiched between 2PACz and ITO, the surface coverage of 2PACz improves and the yield of the devices, in terms of all device parameters, also improves, i.e., the standard deviation decreases from 4.6% with ITO/2PACz to 2.0% with ITO/NiO/2PACz. In conclusion, thanks to the presence of NiO, the TRJ consisting of ITO/NiO/2PACz leads to a 23.7% efficient tandem device with narrow device efficiency distribution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Perovskite/silicon tandem photovoltaics: technological disruption without business disruption10.1063/5.0054086 ↗
2. Cost analysis of perovskite tandem photovoltaics10.1016/j.joule.2018.05.001 ↗
3. Bellini · 2023
4. Monolithic perovskite‐silicon tandem solar cells: from the lab to fab?10.1002/adma.202106540 ↗
5. Monolithic perovskite/silicon tandem solar cell with 28.7% efficiency using industrial silicon bottom cells10.1021/acsenergylett.2c01358 ↗
6. Monolithic perovskite/black-silicon tandems based on tunnel oxide passivated contacts10.1016/j.joule.2022.09.006 ↗
7. Bathocuproine:Ag complex functionalized tunneling junction for efficient monolithic perovskite/TOPCon silicon tandem solar cell10.1002/solr.202200793 ↗
8. Monolithic perovskite/silicon tandem solar cells fabricated using industrial p‐type POLO/PERC silicon bottom cell technology10.1002/solr.202101066 ↗
9. 21.8% efficient monolithic perovskite/homo-junction-silicon tandem solar cell on 16 cm210.1021/acsenergylett.8b01382 ↗
10. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
11. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction10.1063/1.4914179 ↗
12. Zinc tin oxide as high-temperature stable recombination layer for mesoscopic perovskite/silicon monolithic tandem solar cells10.1063/1.4971361 ↗
13. Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency10.1039/C7EE02288C ↗
14. Large area efficient interface layer free monolithic perovskite/homo-junction-silicon tandem solar cell with over 20% efficiency10.1039/C8EE00689J ↗
15. In situ recombination junction between p-Si and TiO2 enables high-efficiency monolithic perovskite/Si tandem cells10.1126/sciadv.aau9711 ↗
16. Developing a robust recombination contact to realize monolithic perovskite tandems with industrially common p-type silicon solar cells10.1109/JPHOTOV.2018.2820509 ↗
17. Large-area 23%-efficient monolithic perovskite/homojunction-silicon tandem solar cell with enhanced UV stability using down-shifting material10.1021/acsenergylett.9b01783 ↗
18. Optimization of device design for low cost and high efficiency planar monolithic perovskite/silicon tandem solar cells10.1016/j.nanoen.2019.03.056 ↗
19. Efficient n-i-p monolithic perovskite/silicon tandem solar cells with tin oxide via a chemical bath deposition method10.3390/en14227614 ↗
20. Perovskite/silicon tandem solar cells with a VOC of 1784 mV based on an industrially feasible 25 cm2 TOPCon silicon cell10.1021/acsaem.1c02796 ↗
21. Recombination junctions for efficient monolithic perovskite-based tandem solar cells: physical principles, properties, processing and prospects10.1039/D0MH00990C ↗
22. Nano-optical designs for high-efficiency monolithic perovskite–silicon tandem solar cells
23. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
24. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells10.1039/C9EE02268F ↗
25. Importance of the indium tin oxide substrate on the quality of self-assembled monolayers formed from organophosphonic acids10.1021/la104464w ↗
26. Characterizing the molecular order of phosphonic acid self-assembled monolayers on indium tin oxide surfaces10.1021/la201161q ↗
27. Enhanced self-assembled monolayer surface coverage by ALD NiO in p-i-n perovskite solar cells10.1021/acsami.1c15860 ↗
28. Merits of batch ALD10.1149/06409.0035ecst ↗
29. Spatial atomic layer deposition: a route towards further industrialization of atomic layer deposition
30. Applications of atomic layer deposition and chemical vapor deposition for perovskite solar cells10.1039/D0EE00385A ↗
31. The chemistry and energetics of the interface between metal halide perovskite and atomic layer deposited metal oxides10.1116/6.0000447 ↗
32. SnOx atomic layer deposition on bare perovskite—an investigation of initial growth dynamics, interface chemistry, and solar cell performance10.1021/acsaem.0c02405 ↗
33. Self-assembled monolayer enables hole transport layer-free organic solar cells with 18% efficiency and improved operational stability10.1021/acsenergylett.0c01421 ↗
34. Flexible all-perovskite tandem solar cells approaching 25% efficiency with molecule-bridged hole-selective contact10.1038/s41560-022-01045-2 ↗
35. NiOx ‐seeded self‐assembled monolayers as highly hole‐selective passivating contacts for efficient inverted perovskite solar cells10.1002/solr.202100663 ↗
36. Monolithic all-perovskite tandem solar cells with minimized optical and energetic losses
37. Tuning halide perovskite energy levels10.1039/D0EE02216K ↗
38. Self-assembled monolayer induced Au(111) and Ag(111) reconstructions: work functions and interface dipole formation10.1021/jp300512k ↗
39. Monolithic perovskite–perovskite–silicon triple-junction tandem solar cell with an efficiency of over 20%10.1021/acsenergylett.2c01556 ↗
40. Minimizing the interface-driven losses in inverted perovskite solar cells and modules10.1021/acsenergylett.3c00697 ↗
41. Atomic-layer-deposited Al-doped zinc oxide as a passivating conductive contacting layer for n+-doped surfaces in silicon solar cells10.1016/j.solmat.2021.111386 ↗
42. Silicon surface passivation by transparent conductive zinc oxide10.1063/1.5054166 ↗
43. 16.8% Monolithic all-perovskite triple-junction solar cells via a universal two-step solution process
44. Plasma-assisted atomic layer deposition of nickel oxide as hole transport layer for hybrid perovskite solar cells10.1039/C9TC04282B ↗
45. Moulder · 1992
46. X-ray photoelectron spectroscopic chemical state Quantification of mixed nickel metal, oxide and hydroxide systems10.1002/sia.3026 ↗
47. X-Ray photoelectron spectroscopy study of indium tin mixed oxides on the surface of silicate glass10.1134/S0020168520050131 ↗