journal article·2023-08

Cyclization of methoxy groups on spiro-type hole transporting materials for efficient and stable perovskite solar cells

Ying Zhou, Xianfu Zhang, Mingyuan Han, Nan Wu, Jianlin Chen, Ghadari Rahim, Yahan Wu, Songyuan Dai, Xuepeng Liu

Publisher page

Abstract

Hole transporting materials (HTMs) are vital in efficient and stable perovskite solar cells (PSCs). To improve the performance of PSCs, it is of great significance to design and optimize HTMs. Here, spiro-biOMe, an analogue of spiro-OMeTAD featuring one additional meta -methoxy group on each diarylamine moiety, is reported. The structure of this new HTM has been further elaborated to give another analogue, spiro-cyclOMe, where an alkyl chain links the two adjacent O atoms. The effect of chemical structure on molecular and photovoltaic properties has been studied. It was found that the hole mobility and thermal stability were noticeably increased in the case of spiro-cyclOMe. When used in the PSC device (used perovskite: Cs 0.05FA 0.95PbI 3), spiro-cyclOMe delivers a power conversion efficiency (PCE) of over 23%, which is higher than spiro-biOMe (PCE = 20.19%) and spiro-OMeTAD (PCE = 22.61%). A device employing spiro-cyclOMe, with an active area of 0.56 cm 2, exhibited a PCE of 21.64%. More importantly, PSCs employing spiro-cyclOMe as HTM also showed better stability than those employing spiro-OMeTAD.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. High-efficiency perovskite solar cells10.1021/acs.chemrev.0c00107 ↗
4. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
5. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
6. Application of organic hole-transporting materials in perovskite solar cells10.3866/PKU.WHXB201603143 ↗
7. A review on solution‐processable dopant‐free small molecules as hole‐transporting materials for efficient perovskite solar cells10.1002/smtd.202000254 ↗
8. Tetraphenylethylene-arylamine derivatives as hole transporting materials for perovskite solar cells10.1021/acsami.1c01606 ↗
9. Molecular engineering of highly efficient dopant-free spiro-type hole transporting materials for perovskite solar cells10.1016/j.solmat.2020.110534 ↗
10. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
11. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
12. Design of low crystallinity spiro-typed hole transporting material for planar perovskite solar cells to achieve 21.76% efficiency10.1021/acs.chemmater.0c03772 ↗
13. A N‐ethylcarbazole terminated spiro‐type hole‐transporting material for efficient and stable perovskite solar cells10.1002/cssc.202201485 ↗
14. Heteroatom engineering on spiro-type hole transporting materials for perovskite solar cells10.1016/j.jechem.2021.09.046 ↗
15. Large-area perovskite solar cells employing spiro-Naph hole transport material10.1038/s41566-021-00931-7 ↗
16. Dibenzo heterocyclic-terminated spiro-type hole transporting materials for perovskite solar cells10.1039/D2TC02564G ↗
17. The future of spirobifluorene-based molecules as hole-transporting materials for solar cells10.1002/solr.202370071 ↗
18. A molecularly engineered hole-transporting material for efficient perovskite solar cells10.1038/nenergy.2015.17 ↗
19. Inverted planar perovskite solar cells with dopant free hole transporting material: lewis base-assisted passivation and reduced charge recombination10.1039/C7TA02440A ↗
20. Dibenzo heterocyclic-terminated spiro-type hole transporting materials for perovskite solar cells10.1039/D2TC02564G ↗
21. D-A-π-A-D-type dopant-free hole transport material for low-cost, efficient, and stable perovskite solar cells10.1016/j.joule.2020.12.003 ↗
22. o-Methoxy substituents in spiro-OMeTAD for efficient inorganic–organic hybrid perovskite solar cells10.1021/ja502824c ↗
23. Simple hole-transporting materials containing twin-carbazole moiety and unconjugated flexible linker for efficient and stable perovskite solar cells10.1016/j.cej.2020.126434 ↗
24. Efficient small molecule bulk heterojunction solar cells with high fill factors via introduction of π-stacking moieties as end group10.1039/C2TA00496H ↗
25. Novel star-shaped D–π–D–π–D and (D–π) 2–D–(π–D) 2 anthracene-based hole transporting materials for perovskite solar cells10.1039/D0NA00299B ↗
26. The effect of structure upon the reactions of organic compounds. Benzene derivatives10.1021/ja01280a022 ↗
27. Graded 2D/3D perovskite heterostructure for efficient and operationally stable MA‐Free perovskite solar cells10.1002/adma.202000571 ↗
28. The donor-dependent methoxy effects on the performance of hole-transporting materials for perovskite solar cells10.1016/j.jechem.2019.11.017 ↗
29. Influence of π-linker on triphenylamine-based hole transporting materials in perovskite solar cells10.1016/j.dyepig.2016.12.022 ↗
30. Hole transporting material with passivating group (CN) for perovskite solar cells with improved stability10.1016/j.dyepig.2020.109129 ↗
31. C≡N-based carbazole-arylamine hole transporting materials for perovskite solar cells: substitution position matters10.1016/j.jechem.2021.04.021 ↗
32. A trifluoroethoxyl functionalized spiro‐based hole‐transporting material for highly efficient and stable perovskite solar cells10.1002/solr.202100944 ↗
33. Molecularly engineered low-cost organic hole-transporting materials for perovskite solar cells: the substituent effect on non-fused three-dimensional systems10.1021/acsaem.1c03775 ↗
34. Restricting lithium-ion migration via Lewis base groups in hole transporting materials for efficient and stable perovskite solar cells10.1016/j.cej.2021.133534 ↗
35. Bifunctional spiro-fluorene/heterocycle cored hole-transporting materials: role of the heteroatom on the photovoltaic performance of perovskite solar cells10.1016/j.cej.2021.133371 ↗
36. High-efficiency planar pin perovskite solar cells based on dopant-free dibenzo [b, d] furan-centred linear hole transporting material10.1016/j.jpowsour.2019.227488 ↗
37. Facile synthesis of triphenylamine-based hole-transporting materials for planar perovskite solar cells10.1016/j.jpowsour.2019.226767 ↗
38. DA-π-AD-type dopant-free hole transport material for low-cost, efficient, and stable perovskite solar cells10.1016/j.joule.2020.12.003 ↗
39. Effects of heteroatom and extending the conjugation on linear hole-transporting materials for perovskite solar cells10.1021/acsaem.2c01267 ↗
40. Star-shaped D-π-D hole-transporting materials regulated by molecular planarity and their application in efficient perovskite solar cells10.1016/j.jpowsour.2021.230102 ↗
41. Carbazole-based Spiro [fluorene-9, 9′-xanthene] as an efficient hole-transporting material for perovskite solar cells10.1021/acsami.0c06318 ↗
42. Heteroatom effect on linear-shaped dopant-free hole transporting materials for perovskite solar cells10.1016/j.solener.2021.04.034 ↗
43. Molecular engineering of simple carbazole-arylamine hole-transport materials for perovskite solar cells10.1039/C9SE01242G ↗