Thermal management of portable photovoltaic systems using novel phase change materials with efficiently enhanced thermal conductivity
Source abstract
Abstract
Solar cells are gradually becoming a common substitute for fossil fuels in order to address the escalating energy crisis and environmental change. Many wearable or outdoor electronic devices are powered by portable solar cells, but due to structural limitations and dramatic increases in heat dissipation, portable solar cell efficiency declines sharply with heat accumulation and temperature rises, and thermal non-uniformity reduces device reliability. An efficient thermal management solution is needed to address these crucial thermal issues. In this study, a novel composite PCM with efficiently enhanced thermal conductivity (ETC-PCM) has been created using graphene, epoxy resin (EP), and polyethylene glycol (PEG) by strong cross-linking and thermally induced structural rearrangement. Compared to the composite PCM with normally enhanced thermal conductivity (NTC-PCM) by traditional mechanical mixing, enhancements are made to ETC-PCM`s cutability, flexibility, and latent heat. More significantly, the thermal conductivity of ETC-PCM increased by 157% to 0.51 W/m·K with the inclusion of a 1.5% effective thermal conductivity filler component. In a composite PV system with direct integration of flexible solar cells and ETC-PCM, the ETC-PCM also exhibited superior thermal management in both time and space dimensions, with enhanced thermal uniformity and long-term reliability of the PV system. The outstanding thermal and mechanical properties of ETC-PCM have shown tremendous potential in many applications, such as solar cell thermal management, solar/electric energy harvesting, thermal energy storage, etc.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Reducing PV module temperature with radiation based PV module incorporating composite phase change material10.1016/j.est.2020.101346 ↗
2. Spatiotemporal dynamic differences of energy-related CO(2) emissions and the related driven factors in six regions of China during two decades
3. Review on the latest conclusions of working group III contribution to the fifth assessment report of the intergovernmental panel on climate change10.1142/S2345748115500050 ↗
4. Experimental study on thermal management and performance improvement of solar PV panel cooling using form stable phase change material
5. Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics10.1016/j.solener.2010.06.010 ↗
6. Hot spots, MPPT technology and the differential power processing (DPP) for wearable PV applications10.1063/5.0061031 ↗
7. A review on the approaches employed for cooling PV cells10.1016/j.solener.2020.08.083 ↗
8. Numerical investigations of solar cell temperature for photovoltaic concentrator system with and without passive cooling arrangements10.1016/j.ijthermalsci.2011.06.014 ↗
9. Review of solar refrigeration and cooling systems10.1016/j.enbuild.2013.08.022 ↗
10. Solar photovoltaic cells performance improvement by cooling technology: an overall review10.1016/j.ijhydene.2020.12.164 ↗
11. Use of heat SINK for solar cell cooling
12. Portable and wearable self-powered systems based on emerging energy harvesting technology10.1038/s41378-021-00248-z ↗
13. Thermal management systems for Photovoltaics (PV) installations: a critical review10.1016/j.solener.2013.08.018 ↗
14. Non-uniform illumination in concentrating solar cells10.1016/j.rser.2012.06.020 ↗
15. Recent progress in flexible–wearable solar cells for self-powered electronic devices10.1039/C9EE03046H ↗
16. Characterization of hybrid-nano/paraffin organic phase change material for thermal energy storage applications in solar thermal systems10.3390/en13195079 ↗
17. Investigation of a binary eutectic mixture of phase change material for building integrated photovoltaic (BIPV) system10.1016/j.solmat.2019.110360 ↗
18. Phase change materials (PCMs) for improving solar still productivity: a review10.1007/s10973-019-08645-3 ↗
19. A review on effect of phase change material encapsulation on the thermal performance of a system10.1016/j.rser.2012.05.037 ↗
20. Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage10.1016/j.rser.2017.10.002 ↗
21. Study on polyethylene glycol/epoxy resin composite as a form-stable phase change material10.1016/j.enconman.2010.06.012 ↗
22. Poly(ethylene glycol) (PEG)-modified epoxy phase-change polymer with dual properties of thermal storage and vibration damping10.1039/C7SE00552K ↗
23. Study on a PEG/epoxy shape-stabilized phase change material: preparation, thermal properties and thermal storage performance10.1016/j.ijheatmasstransfer.2018.05.153 ↗
24. Mixed convection heat transfer of AL(2)O(3)nanofluid in a horizontal channel subjected with two heat sources10.1007/s10973-020-09887-2 ↗
25. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
26. Spray-assisted assembled spherical boron nitride as fillers for polymers with enhanced thermally conductivity10.1016/j.cej.2019.03.217 ↗
27. Study on preparation of montmorillonite-based composite phase change materials and their applications in thermal storage building materials10.1016/j.enconman.2007.07.031 ↗
28. Multiresponsive graphene-aerogel-directed phase-change smart fibers10.1002/adma.201801754 ↗
29. Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite10.1016/j.carbon.2012.07.029 ↗
30. Numerical treatment for dynamics of second law analysis and magnetic induction effects on ciliary induced peristaltic transport of hybrid nanomaterial10.3389/fphy.2021.631903 ↗
31. Thermal conductivity enhancement on phase change materials for thermal energy storage: a review10.1016/j.ensm.2019.10.010 ↗
32. Heat transfer in steady slip flow of tangent hyperbolic fluid over the lubricated surface of a stretchable rotatory disk10.1016/j.csite.2020.100825 ↗
33. Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage10.1016/j.apenergy.2018.10.036 ↗
34. Thermal conductivity enhancement and shape stability of phase-change materials using high-strength 3D graphene skeleton
35. Investigation of inorganic phase change material for a semi-transparent photovoltaic (STPV) module10.3390/en13143582 ↗
36. Performance enhancement of copper indium diselenide photovoltaic module using inorganic phase change material10.1002/apj.2480 ↗
37. Graphene nanoplatelets–silver hybrid nanofluids for enhanced heat transfer10.1016/j.enconman.2015.05.023 ↗
38. The true amphipathic nature of graphene flakes: a versatile 2D stabilizer10.1002/adma.202000608 ↗
39. Structural rearrangement and stiffening of hydrophobically modified supramolecular hydrogels during thermal annealing10.1002/polb.24360 ↗
40. Thermal and mechanical characterization of high performance epoxy systems with extended cure times10.1007/BF01980758 ↗
41. Influence of different concentrations of N-phenylaminopropyl - POSS on the thermodynamic fragility of the cured epoxy resin10.1016/j.polymer.2013.03.022 ↗
42. Novel high-performance poly(benzoxazole-co-imide) resins with low dielectric constants and superior thermal stabilities derived from thermal rearrangement of ortho-hydroxy polyimide oligomers10.1016/j.cej.2018.11.175 ↗
43. Continuous carbon nanotube-ultrathin graphite hybrid foams for increased thermal conductivity and suppressed subcooling in composite phase change materials10.1021/acsnano.5b02917 ↗
44. Effects of thermal cross-linking on the structure and property of asymmetric membrane prepared from the polyacrylonitrile
45. Comparative overview of the performance of cementitious and non-cementitious nanomaterials in mortar at normal and elevated temperatures
46. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)10.1016/j.solmat.2011.08.020 ↗
47. Preparation, characterization and performance of paraffin/sepiolite composites as novel shape-stabilized phase change materials for thermal energy storage10.1016/j.solmat.2021.111300 ↗