An effective air heat-treatment strategy of precursor films in search of high open-circuit voltage for efficient CZTSSe cells
Source abstract
Abstract
Rationally controlling the electronic property of the absorbers is effective but challenging in overcoming the drawbacks of large open-circuit voltage ( V OC) deficit for high efficient Cu 2ZnSn(S,Se) 4 (CZTSSe) solar cells. Herein, selecting chlorides as metal precursor, for the ambient-air processed devices, an approach of heat-treating the Cu 2ZnSnS 4 (CZTS) precursor films to regulate the electronic properties of CZTSSe absorbers is proposed to effectively increase the V OC towards high efficient cells. It is found that though the temperature of heat-treatment can lead to similar CZTSSe absorber films in composition and crystallinity, the final photovoltaic performance of the cells are dramatic difference. An efficiency of 9.20% with a large V OC of 464 mV was achieved from the 400 oC treated precursor film, whereas the non-treated cells obtained 6.38% efficiency and 399 mV V OC, realizing the V OC deficit decreased from 711 to 594 mV. Detailed investigations indicate a proper heat-treating temperature can significantly improve the electric property of the absorber layers, making it possess reduced band-tailing effects, lower Urbach energy, larger recombination resistance and longer carrier lifetime for enhancing the device efficiency. Such effective approach of directly heat-treating the precursor films to rationally regulate electric properties of the absorbers might provide a new way to identify the origin of the V OC deficit for high efficient CZTSSe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
2. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
3. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
4. Identifying the origin of the VOC deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution10.1039/D0EE03702H ↗
5. Optimizing the ratio of Sn4+ and Sn2+ in Cu2ZnSn(S,Se)4 precursor solution via air environment for highly efficient solar cells10.1002/solr.202100574 ↗
6. Achieving low VOC-deficit characteristics in Cu2ZnSn(S,Se)4 solar cells through improved carrier separation10.1021/acsami.0c16936 ↗
7. Synergistic effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency10.1002/aenm.201802540 ↗
8. On the origin of band-tails in kesterite10.1016/j.solmat.2017.11.005 ↗
9. Progress and prospects of CZTSSe/CdS interface engineering to combat high open-circuit voltage deficit of kesterite photovoltaics: a critical review10.1039/D0TA06450E ↗
10. What is the band alignment of Cu2ZnSn(S,Se)4 solar cells?10.1016/j.solmat.2017.05.008 ↗
11. Underlying mechanism of the efficiency loss in CZTSSe solar cells: disorder and deep defects10.1007/s40843-020-1385-0 ↗
12. An efficient Li+-doping strategy to optimize the band alignment of a Cu2ZnSn(S,Se)4/CdS interface by a Se&LiF co-selenization process10.1039/D0TA07268K ↗
13. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
14. Impact of the degree of Cu-Zn order in Cu2ZnSn(S,Se)4 solar cell absorbers on defect states and band tails10.1063/1.5036622 ↗
15. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗
16. Influence of WSe2 buffer layer at back electrode on performance of Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2020.02.033 ↗
17. Numerical study to improve the back interface contact of CZTSSe solar cells using oxygen-doped Mo(Se1–x, Ox)210.1021/acs.jpcc.1c04129 ↗
18. Regulating crystal growth via organic lithium salt additive for efficient Kesterite solar cells10.1016/j.nanoen.2021.106405 ↗
19. Effect of sodium-doping on the performance of CZTS absorb layer: single and bifacial sodium-incorporation method10.1016/j.solener.2021.04.063 ↗
20. An effective Li-containing interfacial-treating strategy for performance enhancement of air-processed CZTSSe solar cell10.1016/j.solmat.2021.111102 ↗
21. Lithium-assisted synergistic engineering of charge transport both in GBs and GI for Ag-substituted Cu2ZnSn(S,Se)4 solar cells10.1016/j.jechem.2020.03.007 ↗
22. Carrier lifetime and charge separation in K+-Doped CZTS nanocrystals10.1021/acsaem.8b01168 ↗
23. A facile process for partial Ag substitution in kesterite Cu2ZnSn(S,Se)4 solar cells enabling a device efficiency of over 1210.1021/acsami.0c19373 ↗
24. Impact of cation substitution in (AgxCu1-x)2ZnSnSe4 absorber-based solar cells towards 10% efficiency: experimental and theoretical analyses10.1002/solr.202100441 ↗
25. Systematic efficiency improvement for Cu2ZnSn(S,Se)4 solar cells by double cation incorporation with Cd and Ge10.1002/adfm.202104528 ↗
26. Device postannealing enabling over 12% efficient solution processed Cu2ZnSnS4 Solar Cells with Cd2+ Substitution10.1002/adma.202000121 ↗
27. Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution10.1039/C7TA09668B ↗
28. Improving carrier-transport properties of CZTS by Mg incorporation with spray pyrolysis10.1021/acsami.9b05244 ↗
29. Optoelectronic and material properties of solution-processed Earth-abundant Cu2BaSn(S,Se)4 films for solar cell applications10.1016/j.nanoen.2020.105556 ↗
30. Effects of Ge alloying on device characteristics of kesterite-based CZTSSe thin film solar cells10.1021/acs.jpcc.5b11594 ↗
31. Heterovalent Ga3+ doping in solution-processed Cu2ZnSn(S,Se)4 solar cells for better optoelectronic performance10.1039/C9SE00705A ↗
32. Surprising efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells with abnormal Zn/Sn ratios10.1002/solr.202000325 ↗
33. Influence of H2Se concentration on Se-rich CZTSSe absorbers sputtered with a ceramic quaternary target10.1016/j.ceramint.2020.02.158 ↗
34. Device characteristics of band gap tailored 10.04% efficient CZTSSe solar cells sprayed from water-based solution10.1021/acsami.9b12565 ↗
35. Complex interplay between absorber composition and alkali doping in high-efficiency kesterite solar cells10.1002/aenm.201701760 ↗
36. Composition control and formation pathway of CZTS and CZTGS nanocrystal inks for kesterite solar cells10.1021/acs.chemmater.5b00104 ↗
37. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
38. CZTSSe/Zn(O,S) heterojunction solar cells with 9.82% efficiency enabled via (NH4)2S treatment of absorber layer10.1002/pip.3439 ↗
39. Two local built-in potentials of H2S processed CZTSSe by complex impedance spectroscopy10.1016/j.solener.2021.06.064 ↗
40. Significantly improving the crystal growth of a Cu2ZnSn(S,Se)4 absorber layer by air-annealing a Cu2ZnSnS4 precursor thin film10.1021/acsami.0c12630 ↗
41. Ambient air-processed Cu2ZnSn(S,Se)4 solar cells with over 12% efficiency10.1016/j.scib.2020.12.030 ↗
42. Beyond 10% efficient Cu2ZnSn(S,Se)4 solar cells: effects of the introduction of SnS powder during selenization process10.1016/j.solmat.2020.110522 ↗
43. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S, Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
44. Modification of crystallization in Cu2ZnSn(S,Se)4 films using Al2O3 capping layers10.1016/j.solmat.2021.111025 ↗
45. Nanoscale rear-interface passivation in Cu2ZnSn(S,Se)4 solar cells through the CuAlO2 intermediate layer10.1021/acsaem.1c00743 ↗
46. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
47. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
48. Impact of preheating environment on microstructural and optoelectronic properties of Cu2ZnSnS4 (CZTS) thin films deposited by spin-coating, Superlattice
49. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
50. Vegard relation and Raman band reference data generated from bulk crystals of kesterite-phase composition series Cu2ZnSnS4xSe4–4x (CZTSSe, 0≤x≤1)10.1021/acs.cgd.9b00911 ↗
51. Impact of Urbach energy on open-circuit voltage deficit of thin-film solar cells10.1016/j.solmat.2020.110502 ↗
52. A simple aqueous precursor solution processing of earth-abundant Cu2SnS3 absorbers for thin-film solar cells10.1021/acsami.6b02167 ↗
53. Defect engineering in earth-abundant CZTSSe photovoltaic materials via Ga3+-doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
54. 8% Efficiency Cu2ZnSn(S,Se)4 (CZTSSe) thin film solar cells on flexible and lightweight molybdenum foil substrates10.1021/acsami.9b03195 ↗
55. Realization of 11.5% efficiency CZTSSe thin-film solar cells by manipulating the phase structure of precursor film10.1002/solr.202100216 ↗
56. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
57. Investigation of correlation between open-circuit voltage deficit and carrier recombination rates in Cu(In,Ga)(S,Se)2-based thin-film solar cells10.1063/1.5023828 ↗
58. Transport properties of a-Si1-xCx:H films investigated by the moving photocarrier grating technique10.1103/PhysRevB.62.13010 ↗
59. Enhancement of open-circuit voltage of solution-processed Cu2ZnSnS4 solar cells with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
60. Abou-Ras · 2011
61. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
62. Electronic properties of the Cu2ZnSn(Se,S)4 absorber layer in solar cells as revealed by admittance spectroscopy and related methods10.1063/1.4729751 ↗
63. Defect engineering in earth-abundant Cu2ZnSn(S,Se)4 photovoltaic materials via Ga3+-doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
64. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
65. Bifacial sodium-incorporated treatments: tailoring deep traps and enhancing carrier transport properties in Cu2ZnSnS4 solar cells10.1016/j.nanoen.2015.07.022 ↗