Band alignment tuning at Mo/CZTS back contact interface through surface oxidation states control of Mo substrate
Source abstract
Abstract
Abstract The molybdenum (Mo) back contact is one of the crucial factor that affects the performance of kesterite Cu2ZnSnS4 (CZTS) thin film solar cells. Thick MoS2 which is formed during sulfurization process of CZTS is known to be harmful for the device performance. MoOx on surface of Mo substrate with proper thickness can enhance the efficiency of CZTS solar cells through reducing the thickness of MoS2 layer and tailoring the work function of back contact. However, the role of oxidation states of Mo in MoOx on the performance of solar cells is unclear. Herein the effect of MoOx with different oxidation states on CZTS absorber and intermediate MoS2 layer were investigated. Our results shown that the efficiency of CZTS solar cells on Mo substrate with proper surface oxidation status (MoO2.03) can be as high as 2.86 times of the one fabricated on higher oxidized Mo (MoO2.21), although the thinnest MoS2 layer was present in the latter case. This work discloses the origin of the oxidation states of Mo for the efficiency enhancement of kesterite structured solar cells. The results will be also helpful to improve the performance of compound semiconductor by oxidation states control strategy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Progress and perspectives of thin film kesterite photovoltaic Technology: a critical review10.1002/adma.201806692 ↗
2. Progress in thin film solar cells based on Cu2ZnSnS410.1155/2011/801292 ↗
3. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
4. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V
5. Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursors10.1016/j.nanoen.2019.02.063 ↗
6. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
7. Elucidating the role of interfacial MoS2 layer in Cu2ZnSnS4 thin film solar cells by numerical analysis10.1016/j.solener.2018.11.055 ↗
8. Improvement of jsc in a Cu2ZnSnS4 solar cell by using a thin carbon intermediate layer at the Cu2ZnSnS4/Mo interface10.1021/acsami.5b05652 ↗
9. Back and front contacts in kesterite solar cells: state-of-the-art and open questions
10. Insights into kesterite's back contact interface: a status review10.1016/j.solmat.2019.04.033 ↗
11. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
12. Efficient kesterite solar cells with high open-circuit voltage for applications in powering distributed devices10.1038/s41560-017-0028-5 ↗
13. Back contact engineering for increased performance in kesterite solar cells10.1002/aenm.201602585 ↗
14. MoO2 sacrificial layer for optimizing back contact interface of Cu2ZnSn(S,Se)4 solar cells10.1109/JPHOTOV.2020.2987165 ↗
15. Eliminating multi-layer crystallization of Cu2ZnSn(S,Se)4 absorber by controlling back interface reaction10.1016/j.nanoen.2020.105042 ↗
16. Energy band Alignment in molybdenum oxide/Cu(in,Ga)Se2 interface for high-efficiency ultrathin Cu(in,Ga)Se2 solar cells from low-temperature growth10.1021/acsaem.9b02460 ↗
17. The effect of thermal evaporated MoO3 intermediate layer as primary back contact for kesterite Cu2ZnSnS4 solar cells10.1016/j.tsf.2018.01.012 ↗
18. Characterization of sputtered MoOx thin films with different oxygen content and their application as back contact in CdTe solar cells10.1016/j.vacuum.2020.109337 ↗
19. Molybdenum, molybdenum oxides, and their electrochemistry10.1002/cssc.201100660 ↗
20. Rapid thermal annealed Molybdenum back contact for Cu2ZnSnS4 thin film solar cells10.1063/1.4916994 ↗
21. UV-ozone induced surface passivation to enhance the performance of Cu2ZnSnS4 solar cells10.1016/j.solmat.2019.04.014 ↗
22. A precursor stacking strategy to boost open-circuit voltage of Cu2ZnSnS4 thin-film solar cells10.1109/JPHOTOV.2018.2813264 ↗
23. Thermal effect on CZTS solar cells in different process of ZnO/ITO window layer fabrication
24. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
25. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
26. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
27. The effect of stoichiometry on Cu-Zn ordering kinetics in Cu2ZnSnS4 thin films10.1063/1.5010081 ↗
28. Improvement on the oxidation resistance and tribological properties of molybdenum disulfide film by doping nitrogen10.1016/j.matdes.2019.108300 ↗
29. Single-atom vacancy defect to trigger high-efficiency hydrogen evolution of MoS210.1021/jacs.9b12113 ↗
30. Guanidinium thiocyanate selective ostwald ripening induced large grain for high performance perovskite solar cells10.1016/j.nanoen.2017.10.006 ↗
31. Carbon concentration dependent grain growth of Cu2ZnSnS4 thin films10.1039/C4RA16447D ↗
32. Structural and microstructural effects of Mo3+/Mo5+ codoping on properties and photocatalytic performance of nanostructured TiO2 thin films10.1021/acs.jpcc.9b02667 ↗
33. XPS-UPS, ISS characterization studies and the effect of Pt and K addition on the catalytic properties of MoO2−x(OH)y deposited on TiO210.1016/j.elspec.2011.07.001 ↗
34. XPS study of as-prepared and reduced molybdenum oxides10.1016/0169-4332(95)00317-7 ↗
35. High performance zinc tin oxide semiconductor grown by atmospheric pressure mist-CVD and the associated thin film transistor properties10.1021/acsami.7b04235 ↗