journal article·2011-03Open access

Influence of laser scribing in the electrical properties of a-Si:H thin film photovoltaic modules

J.J. García-Ballesteros, I. Torres, S. Lauzurica, D. Canteli, J.J. Gandía, C. Molpeceres

Abstract

The third (P3) laser patterning step of thin film photovoltaic devices is studied experimentally using a diode-pumped solid state laser with 532 nm wavelength and a delay generator. The effect on the electrical characteristics of the devices due to the patterning process is investigated by performing scribes on single, thin-film solar cells. As it is shown, in this type of experiment the inertia in the motion systems or in the scanner controlling the direction of the laser beam plays a critical role in the results. By controlling externally the output of the laser beam it is possible to overcome the inertia and investigate the real effect of the P3 laser scribing on the device electrical characteristics. When the laser scribing conditions are optimized and the inertia in the system is taken care of, the P3 process has very little effect on the device electrical characteristics. Translated to modules this means that by optimizing the P3 process, the decrease in the efficiency found when up-scaling from single cells to modules can be minimized (as far as the P3 process is concerned) to that coming from the removed area
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. 〈http://www.epia.org/〉
2. J. Bovatsek, A. Tamhankar, R.S. Patel, N.M. Bulgakova, J. Bonse, Thin film removal mechanisms in ns-laser processing of photovoltaic materials, Thin Solid Films 518 (10) 2897–2904, doi:10.1016/j.tsf.2009.10.135.10.1016/j.tsf.2009.10.135 ↗
3. C. Molpeceres, S. Lauzurica, J.J. García-Ballesteros, M. Morales, G. Guadaño, M. Colina, I. Sánchez-Aniorte, J.L. Ocaña, J.J. Gandía, F. Villar, O. Nos, J. Bertomeu, UV laser selective ablation of photovoltaic materials for monolithic interconnection of devices based on a-Si:H, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, © 2008-WIP, volume I, pp. 2438–2442, ISBN 3-936338-24-8.
4. High speed laser processing for monolithical series connection of silicon thin-film modules10.1002/pip.792 ↗
5. M. Vetter, J.P. Borrajo, J. Andreu, Fabrication of very large 2.6m×2.2m amorphous silicon solar modules on glass, in: A.G. Loureiro, N.S. Iglesias, M.A.A. Rodriguez, E.C. Figueroa (Eds.), Proceedings of the 2009 Spanish Conference on Electron Devices, IEEE, New York, 2009, pp. 406–409.10.1109/SCED.2009.4800519 ↗
6. C. Molpeceres, M. Colina, M. Holgado, M. Morales, I. Sánchez-Aniorte, S. Lauzurica, J.J. García-Ballesteros, J.L. Ocaña. Optical characterization of the heat-affected zone in laser patterning of thin film a-Si:H, Proceedings of SPIE, the International Society for Optical Engineering, 7202 (2009), 72020R-72020R10, ISSN 0277-786X doi:10.1117/12.809514.10.1117/12.809514 ↗