Controllable (h k 1) preferred orientation of Sb2S3 thin films fabricated by pulse electrodeposition
Source abstract
Abstract
Antimony sulfide (Sb 2S 3 ) has attracted much attention as a photovoltaic absorber material with tunable bandgap, low structural complexity, and high absorption coefficient. As one-dimensional ribbon material, the uncontrollable (h k 0) orientation of the Sb 2S 3 film will affect the carrier transport, controlling the orientation growth of the film is an effective strategy to improve the short-circuit current density. In this work, the large-grained Sb 2S 3 films with (h k 1) preferred orientation were fabricated by pulsed electrodeposition and post-sulfurization, and the effects of deposition charges on film properties and device efficiency were investigated. A champion photoelectric conversion efficiency of 3.35% was obtained. And a new perspective for effectively controlling thin film growth orientation and fabricating low-cost solar cells was provided.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Insights into kesterite's back contact interface: a status review10.1016/j.solmat.2019.04.033 ↗
2. Progress in indium (III) sulfide (In2S3) buffer layer deposition techniques for CIS, CIGS, and CdTe-based thin film solar cells10.1016/j.solener.2015.07.028 ↗
3. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗
4. Effect of Cu content in CIGSe absorber on MoSe2 formation during post-selenization process10.1016/j.mssp.2020.105275 ↗
5. Smooth Cu electrodeposition for Cu(In,Ga)Se2 thin-film solar cells: dendritic clusters elimination by Ag buffer layer10.1016/j.egyr.2021.12.079 ↗
6. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
7. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201870021 ↗
8. Efficient and composition‐tolerant kesterite Cu2ZnSn(S, Se)4 solar cells derived from an in situ formed multifunctional carbon framework10.1002/aenm.202102298 ↗
9. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
10. Optical properties of amorphous and crystalline Sb2S3 thin films10.1016/0040-6090(79)90347-X ↗
11. Wide bandgap Sb2S3 solar cells10.1002/adfm.202100265 ↗
12. Doping strategies in Sb2S3 thin films for solar cells10.1002/smll.202100241 ↗
13. Electronic structure and optical properties of Sb2S3 crystal10.1016/j.physb.2010.10.070 ↗
14. Low-temperature crystal structures of stibnite implying orbital overlap of Sb 5s2 inert pair electrons10.1007/s00269-001-0227-1 ↗
15. Structural, morphological and spectroscopic ellipsometry studies on sputter deposited Sb2S3 thin films10.1007/s10854-016-5033-0 ↗
16. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy10.1002/adfm.201304238 ↗
17. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
18. Intrinsic defect limit to the electrical conductivity and a two‐step p‐type doping strategy for overcoming the efficiency bottleneck of Sb2S3‐based solar cells10.1002/solr.201900503 ↗
19. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
20. Boosting VOC of antimony chalcogenide solar cells: a review on interfaces and defects10.1002/nano.202000288 ↗
21. Quasiepitaxy strategy for efficient full‐inorganic Sb2S3 solar cells10.1002/adfm.201901720 ↗
22. Hydrothermal growth of Sb2S3 thin films on molybdenum for solar cell applications: effect of post-deposition annealing10.1016/j.jallcom.2021.162891 ↗
23. The effect of absorber thickness on the planar Sb2S3 thin film solar cell: trade-off between light absorption and charge separation10.1016/j.solener.2020.02.074 ↗
24. Current improvement in substrate structured Sb2S3 solar cells with MoSe2 interlayer
25. Substrate structured Sb2S3 thin film solar cells fabricated by rapid thermal evaporation method10.1016/j.solener.2019.02.014 ↗
26. Sb2S3 thin films prepared by vulcanizing evaporated metallic precursors10.1016/j.matlet.2017.05.040 ↗
27. Highly reproducible planar Sb2S3-sensitized solar cells based on atomic layer deposition10.1039/C4NR04148H ↗
28. Fabrication of Sb2S3 thin films by sputtering and post-annealing for solar cells10.1016/j.ceramint.2018.10.155 ↗
29. Fabrication of Sb2S3 thin films by magnetron sputtering and post-sulfurization/selenization for substrate structured solar cells10.1016/j.jallcom.2020.154235 ↗
30. Alcohol vapor post‐annealing for highly efficient Sb2S3 planar heterojunction solar cells10.1002/solr.201900133 ↗
31. Preferentially oriented large antimony trisulfide single-crystalline cuboids grown on polycrystalline titania film for solar cells10.1038/s42004-019-0225-1 ↗
32. Solution‐processed compact Sb2S3 thin films by a facile one‐step deposition method for efficient solar cells10.1002/solr.202100666 ↗
33. Efficient Sb2S3-sensitized solar cells via single-step deposition of Sb2S3 using S/Sb-Ratio-Controlled SbCl3-thiourea complex solution10.1002/adfm.201500296 ↗
34. Spin-Coating process of an inorganic Sb2S3 thin film for photovoltaic applications10.1166/jnn.2016.13235 ↗
35. Sequential deposition route to efficient Sb2S3 solar cells10.1039/C8TA08296K ↗
36. Annealing temperature impact on Sb2S3 solar cells prepared by spin-coating method10.1016/j.matlet.2019.02.033 ↗
37. Fabrication of [hk1]-oriented Sb2S3 thin films from Sb-S molecular precursor ink based on alcohol solvent10.1016/j.matlet.2021.130227 ↗
38. Composition engineering of Sb2S3 film enabling high performance solar cells10.1016/j.scib.2018.12.013 ↗
39. Panchromatic photon-harvesting by hole-conducting materials in inorganic-organic heterojunction sensitized-solar cell through the formation of nanostructured electron channels10.1021/nl204224v ↗
40. Controllable orientations for Sb2S3 solar cells by vertical VTD method10.1002/pip.3278 ↗
41. A novel metal precursor structure for electrodepositing ultrathin CIGSe thin-film solar cell with high efficiency10.1021/acsami.0c01008 ↗
42. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
43. Antimony(III) sulfide thin films as a photoanode material in photocatalytic water splitting10.1021/acsami.5b12178 ↗
44. Structural properties of Sb2S3 under pressure: evidence of an electronic topological transition10.1038/srep24246 ↗
45. Enhancing the efficiency of Sb2S3 solar cells using dual-functional potassium doping10.1016/j.solmat.2020.110816 ↗
46. Interfacial engineering by indium-doped CdS for high efficiency solution processed Sb2(S1- xSex)3 solar cells10.1021/acsami.8b18330 ↗
47. Sb2Se3 versus Sb2S3 solar cell: a numerical simulation10.1016/j.solener.2021.09.080 ↗
48. Alternative buffer layers in Sb2Se3 thin‐film solar cells to reduce open‐circuit voltage offset10.1016/j.solener.2020.03.115 ↗
49. Two stage modelling of solar photovoltaic cells based on Sb2S3 absorber with three distinct buffer combinations10.1016/j.solener.2020.03.058 ↗
50. Efficient Sb2Se3 solar cell with a higher fill factor: a theoretical approach based on thickness and temperature10.1016/j.solener.2021.11.002 ↗
51. Numerical analysis of ultrathin Sb2Se3-based solar cells by SCAPS-1D numerical simulator device10.1016/j.cjph.2020.12.010 ↗
52. Efficient Sb2(S,Se)3/Zn(O,S) solar cells with high open-circuit voltage by controlling sulfur content in the absorber-buffer layers10.1016/j.solener.2021.09.039 ↗
53. Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D10.1016/j.solmat.2021.111184 ↗
54. Experimental and numerical simulation of deposition time effect on ZnS thin films for CZTS-based solar cells10.1007/s11082-021-03143-z ↗
55. Numerical analysis of potential buffer layer for Cu2ZnSnS4 (CZTS) solar cells10.1016/j.ijleo.2019.164155 ↗