Setting the baseline for the modelling of Kesterite solar cells: The case study of tandem application
Source abstract
Abstract
The Kesterite solar cells research landscape is at a crossroad and despite a much improved understanding of the limitations of this class of materials, the current performance deficit contrasts with the several other thin film technologies reaching conversion efficiency values well above 20%. It is more important than ever for the Kesterite community to collaborate directly or indirectly and data sharing is an essential building block in that regard. This work proposes a detailed set of modelling baselines and parameters, based on a consistent set of properties obtained with experimental devices made by our group. These parameters permit to accurately reproduce all photovoltaic figures of merits of reference experimental Kesterite cells with a relative accuracy of 1% or less. As a case study, and using optical modelling based on the transfer matrix method in complement, the potential of Kesterite materials in tandem devices with either a Perovskite or a Crystalline Silicon partner is evaluated. It is found that a moderate improvement of pure selenium CZTSe, feasible in the short to middle term, would realistically permit to use this material as bottom subcell in tandem with a Perovskite top cell and obtain efficiencies reaching the 30% threshold. On the other hand, using a Kesterite absorber in a top subcell with a silicon bottom subcell appears as particularly ambitious even when considering several important optimizations to the material, and it is believed that only an important breakthrough would render this material viable for such application. The complete set of material parameters, optical indices and modelling files are shared for the Kesterite community to use and build improve upon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Status of materials and device modelling for kesterite solar cells
2. Upper limit to the photovoltaic efficiency of imperfect crystals from first principles10.1039/D0EE00291G ↗
3. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗
4. Small atom doping: a synergistic strategy to reduce SnZn recombination center concentration in Cu2ZnSnSe4?10.1002/solr.202270114 ↗
5. Solar cell efficiency tables (Version 60)10.1002/pip.3595 ↗
6. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
7. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
8. Hwang · 2022
9. Optoelectronic simulation of four-terminal all-inorganic CsPbI3/CZTSSe tandem solar cell with high power conversion efficiency
10. D. Jayan K, “Theoretical Modeling of Perovskite–Kesterite Tandem Solar Cells for Optimal Photovoltaic Performance,” Energy Technology, no. n/a, p. 2200635, doi: 10.1002/ente.202200635.10.1002/ente.202200635 ↗
11. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
12. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
13. High efficiency Cu2ZnSnS4 solar cells over FTO substrates and their CZTS/CdS interface passivation via thermal evaporation of Al2O310.1039/D1TC00880C ↗
14. Numerical modeling of CIGS and CdTe solar cells: setting the baseline
15. Feasibility of a full chalcopyrite tandem solar cell: a quantitative numerical approach10.1002/solr.202100202 ↗
16. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
17. Refractive index and extinction coefficient of NH2CH= NH2PbI3 perovskite photovoltaic material10.1088/1361-648X/aa6e6c ↗
18. Hybridized guided-mode resonances via colloidal plasmonic self-assembled grating10.1021/acsami.8b20535 ↗
19. CH 3 NH 3 PbI 3 perovskite/silicon tandem solar cells: characterization based optical simulations10.1364/OE.23.00A263 ↗
20. Defect-assisted nonradiative recombination in Cu 2 ZnSn Se 4 : a comparative study with Cu 2 ZnSn S 410.1103/PhysRevMaterials.5.025403 ↗
21. Effective and noneffective recombination center defects in Cu 2 ZnSnS 4 : significant difference in carrier capture cross sections10.1021/acs.chemmater.8b03933 ↗
22. Interface recombination of Cu2ZnSnS4 solar cells leveraged by high carrier density and Interface defects10.1002/solr.202100418 ↗
23. Characterization of the stability of indium tin oxide and functional layers for semitransparent back-contact applications on Cu(in,Ga)Se2 solar cells10.1002/solr.202101071 ↗
24. Highly efficient wide-band-gap perovskite solar cells fabricated by sequential deposition method10.1016/j.nanoen.2021.106114 ↗
25. Minimized surface deficiency on wide-bandgap perovskite for efficient indoor photovoltaics10.1016/j.nanoen.2020.105377 ↗
26. Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D perovskite heterostructure
27. Cation-diffusion-based simultaneous bulk and surface passivations for high bandgap inverted perovskite solar cell producing record Fill factor and efficiency10.1002/aenm.202201672 ↗
28. Rear band gap grading strategies on Sn-Ge-alloyed kesterite solar cells10.1021/acsaem.0c01146 ↗
29. J. Andrade-Arvizu, “Band Gap Grading Strategies for High Efficiency Kesterite Based Thin Film Solar Cells,” University of Barcelona.
30. Graded band gap structure of kesterite material using bilayer of CZTS and CZTSe for enhanced performance: a numerical approach10.1016/j.solener.2021.01.057 ↗
31. Defect control for 12.5% efficiency Cu 2 ZnSnSe 4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
32. CZTS stoichiometry effects on the band gap energy
33. Innovative post-deposition treatment for local doping control in Cu2ZnSnSe4 by a combined temperature-voltage method
34. CZTS solar cells and the possibility of increasing VOC using evaporated Al2O3 at the CZTS/CdS interface10.1016/j.solener.2020.02.009 ↗
35. Sodium-assisted passivation of grain boundaries and defects in Cu 2 ZnSnSe 4 thin films10.1039/C9CP06537G ↗
36. Engineering grain boundaries in Cu 2 ZnSnSe 4 for better cell performance: a first-principle study10.1002/aenm.201300712 ↗
37. Beckmann
38. Defect depth-profiling in kesterite absorber by means of chemical etching and surface analysis10.1016/j.apsusc.2020.148342 ↗