A modified two-step sequential spin-coating method for perovskite solar cells using CsI containing organic salts in mixed ethanol/methanol solvent
Source abstract
Abstract
Two-step sequential spin-coating method has been widely used to prepare mixed FA/Cs and FA/MA/Cs perovskite solar cells. However, due to the extremely low solubility of Cs salts in the commonly used isopropanol solvent, which is used to dissolve the organic salts, the Cs salts can only be dissolved into the PbI 2 precursors with mixed DMF/DMSO solvent. Herein, we have proposed a modified two-step sequential spin-coating method to solve the above problem. A mixed solvent consisting of ethanol and methanol is used to dissolve the CsI, FAI, and MACl at the same time. The solubility of CsI in the mixed ethanol/methanol solvent can be tuned by varying the ethanol/methanol ratio. After optimizing the ethanol/methanol ratio, high quality FA 1-xCs xPbI 3 perovskite film with large perovskite crystal, low defect density and long carrier life time can be obtained using our modified two-step sequential spin-coating method, which can result in a perovskite solar cell with champion power conversion efficiencies of 21.17% (cell area 0.1 cm 2) and 14.65% (cell area 0.25 cm 2 ) respectively. Our study provides a new method for fabricating mixed FA/Cs perovskite solar cells using CsI containing organic salts solution, which can be further optimized to fabricate highly efficient perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
2. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
3. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
4. Correlating hysteresis and stability with organic cation composition in the two-step solution-processed perovskite solar cells10.1021/acsami.9b23374 ↗
5. Review of two‐step method for lead halide perovskite solar cells10.1002/solr.202101007 ↗
6. Engineering of perovskite materials based on formamidinium and cesium hybridization for high-efficiency solar cells10.1021/acs.chemmater.8b04871 ↗
7. Cs incorporation via sequential deposition for stable and scalable organometal halide perovskite solar cells10.1016/j.jpowsour.2021.230783 ↗
8. Effects of A site doping on the crystallization of perovskite films10.1039/D0TA08656H ↗
9. Precise control of perovskite crystallization kinetics via sequential A-site doping10.1002/adma.202004630 ↗
10. Long-term stable and highly efficient perovskite solar cells with a formamidinium chloride (FACl) additive10.1039/D0TA05676F ↗
11. Additive effect of bromides and chlorides on the performance of perovskite solar cells fabricated via sequential deposition10.1016/j.jpowsour.2021.230528 ↗
12. Μethylammonium chloride: a Key additive for highly efficient, stable, and up‐scalable perovskite solar cells10.1002/eem2.12040 ↗
13. δ‐CsPbI3 intermediate phase growth assisted sequential deposition boosts stable and high‐efficiency triple cation perovskite solar cells
14. The impact of a dynamic two-step solution process on film formation of Cs0.15 (MA0.7 FA0.3)0.85 PbI3 perovskite and solar cell performance10.1002/smll.201804858 ↗
15. Effect of CsCl additive on the morphological and optoelectronic properties of formamidinium lead iodide perovskite10.1002/solr.201900294 ↗
16. CsI pre-intercalation in the inorganic framework for efficient and stable FA1-x csx PbI3 (Cl) perovskite solar cells10.1002/smll.201700484 ↗
17. Efficient planar heterojunction FA1- xCs xPbI3 perovskite solar cells with suppressed carrier recombination and enhanced open circuit voltage via anion-exchange process10.1021/acsami.8b18807 ↗
18. Microscopic degradation in formamidinium-cesium lead iodide perovskite solar cells under operational stressors10.1016/j.joule.2020.06.005 ↗
19. Simultaneous interfacial modification and crystallization control by biguanide hydrochloride for stable perovskite solar cells with PCE of 24.4
20. Cesium halides-assisted crystal growth of perovskite films for efficient planar heterojunction solar cells10.1021/acs.chemmater.8b02002 ↗
21. Phase transformation barrier modulation of CsPbI3 films via PbI3− complex for efficient all-inorganic perovskite photovoltaics10.1016/j.nanoen.2022.107388 ↗
22. Dimensionality control of SnO2 films for hysteresis-free, all-inorganic CsPbBr3 perovskite solar cells with efficiency exceeding 1010.1021/acsami.0c22542 ↗
23. Inorganic CsPbIBr2‐based perovskite solar cells: fabrication technique modification and efficiency improvement10.1002/solr.201900135 ↗
24. Highly efficient perovskite solar cells employing SnO2 electron transporting layer derived from a tin oxalate precursor solution10.1016/j.jpowsour.2022.231871 ↗
25. Electrochemical synthesis of annealing-free and highly stable black-phase CsPbI3 perovskite10.1039/D1CC03661K ↗
26. All-inorganic, hole-transporting-layer-free, carbon-based CsPbIBr2 planar solar cells with ZnO as electron-transporting materials10.1016/j.jallcom.2019.152768 ↗
27. A synergistic Cs2CO3 ETL treatment to incorporate Cs cation into perovskite solar cells via two-step scalable fabrication10.1039/D0TC05877G ↗
28. Cesium iodide post-treatment of organic-inorganic perovskite crystals to improve photovoltaic performance and thermal stability10.1039/D0NR05435F ↗
29. Double-layer CsI intercalation into an MAPbI3 framework for efficient and stable perovskite solar cells10.1016/j.nanoen.2021.106135 ↗
30. Solvent-engineering-processed CsPbIBr2 inorganic perovskite solar cells with efficiency of ∼1110.1016/j.solmat.2022.111640 ↗