High performing air stable inverted perovskite solar cells using nanostructured CuSCN thin film as hole transport material
Source abstract
Abstract
Abstract In this article, the growth of CuSCN nanorods and nanowires by changing the electrodeposition potential and time is presented. The dependency of growth of CuSCN nanostructures with applied potential and time is demonstrated. The inverted perovskite solar cells (PSCs) are fabricated using thin films of electrodeposited CuSCN nanorods and nanowires. The maximum photovoltaic performance is observed with two dimensional (2D) nanorods grown for 3 min at all the applied potentials compared with other CuSCN nanostructures grown by various deposition time and potentials. The cone-shaped CuSCN nanorods grown at the applied potential of −450 mV delivers the highest photocurrent (Jsc = 21.11 mA/cm2) and power conversion efficiency (η = 12.42%) for the PSCs with the area of 0.75 cm2. The interrelation between the CuSCN nanostructures and photovoltaic performance is systemically investigated. The charge transfer resistance and the capacitive behaviour of CuSCN layers are analysed by electrochemical impedance spectroscopy. The highest electron lifetime of 15.60 μs is observed for the PSCs fabricated with cone-shaped CuSCN nanorods grown at the applied potential of −450 mV for 3 min. The PSCs stability is tested under an open atmosphere with humidity >60% and retains 80% photovoltaic performance and stability for 50 days under atmospheric condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
2. Compositional engineering for thermally stable, highly efficient perovskite solar cells exceeding 20% power conversion efficiency with 85° C/85% 1000 h stability10.1002/adma.201806823 ↗
3. Compositional engineering of chemical bath deposited (Zn, Cd) S buffer layers for electrodeposited CuIn(S, Se)2 and coevaporated Cu(In, Ga)Se2 solar cells10.1002/pip.853 ↗
4. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
5. Large-area perovskite solar cells–a review of recent progress and issues10.1039/C8RA00384J ↗
6. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
7. Electronic structure of TiO2/CH3NH3PbI3 perovskite solar cell interfaces10.1021/jz402749f ↗
8. TiO2 electron transport bilayer for highly efficient planar perovskite solar cell10.1002/smll.201701535 ↗
9. Rutile TiO2-based perovskite solar cells10.1039/c4ta01786b ↗
10. Surface engineering of TiO2 ETL for highly efficient and hysteresis‐less planar perovskite solar cell (21.4%) with enhanced open‐circuit voltage and stability10.1002/aenm.201800794 ↗
11. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
12. CuSCN-based inverted planar perovskite solar cell with an average PCE of 15.6%10.1021/acs.nanolett.5b00116 ↗
13. Hole‐transporting materials in inverted planar perovskite solar cells10.1002/aenm.201600474 ↗
14. pin/nip type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides10.1039/C6NR02276F ↗
15. Machine learning analysis on stability of perovskite solar cells10.1016/j.solmat.2019.110284 ↗
16. Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsnano.6b01575 ↗
17. Electrochemical properties of electrosynthesized TiO2 thin films10.1016/j.apsusc.2006.06.029 ↗
18. Synthesis and characterization of a novel SnO/SnO2 hybrid photocatalyst10.1016/j.jallcom.2015.12.007 ↗
19. 11% efficient perovskite solar cell based on ZnO nanorods: an effective charge collection system10.1021/jp412407j ↗
20. Highly efficient flexible perovskite solar cells using solution-derived NiO x hole contacts10.1021/acsnano.5b08135 ↗
21. Studying the effect of MoO3 in hole-conductor-free perovskite solar cells10.1021/acsenergylett.8b01169 ↗
22. BiVO4/WO3/SnO2 double-heterojunction photoanode with enhanced charge separation and visible-transparency for bias-free solar water-splitting with a perovskite solar cell10.1021/acsami.6b12782 ↗
23. Solution‐processed Cu2O and CuO as hole transport materials for efficient perovskite solar cells10.1002/smll.201501330 ↗
24. V2O5-PEDOT:PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
25. Efficient and stable inverted planar perovskite solar cells employing CuI as hole‐transporting layer prepared by solid–gas transformation10.1002/ente.201700422 ↗
26. Solution-processed CuS NPs as an inorganic hole-selective contact material for inverted planar perovskite solar cells10.1021/acsami.5b12776 ↗
27. Efficient inverted perovskite solar cells with CuSeCN as the hole transport material10.1016/j.jpowsour.2020.228505 ↗
28. Air-processed carbon-based perovskite solar cells with enhanced efficiency and stability: effect of temperature control and using CuSCN10.1016/j.jallcom.2019.153272 ↗
29. Band-tail transport of CuSCN: origin of hole extraction enhancement in organic photovoltaics10.1021/acs.jpclett.6b01039 ↗
30. Copper (I) thiocyanate (CuSCN) hole‐transport layers processed from aqueous precursor solutions and their application in thin‐film transistors and highly efficient organic and organometal halide perovskite solar cells10.1002/adfm.201701818 ↗
31. Improving the efficiency and stability of inverted perovskite solar cells by CuSCN-doped PEDOT:PSS10.1016/j.solmat.2019.110316 ↗
32. p‐Doping of copper (I) thiocyanate (CuSCN) hole‐transport layers for high‐performance transistors and organic solar cells
33. Low temperature processed inverted planar perovskite solar cells by r-GO/CuSCN hole-transport bilayer with improved stability10.1016/j.solener.2018.07.022 ↗
34. Improvement of efficiency and stability of CuSCN-based inverted perovskite solar cells by post-treatment with potassium thiocyanate10.1016/j.jssc.2018.10.014 ↗
35. High-performance inverted perovskite solar cells using doped poly (triarylamine) as the hole transport layer10.1021/acsaem.8b02047 ↗
36. Electrochemical synthesis of CuSCN nanostructures, tuning the morphological and structural characteristics: from nanorods to nanostructured layers10.1016/j.mssp.2017.06.030 ↗
37. Highly efficient inverted solar cells based on perovskite grown nanostructures mediated by CuSCN10.1039/C7NR01135K ↗
38. Inorganic based hole transport materials for perovskite solar cells10.1007/s10854-018-8902-x ↗
39. Novel approaches and scalability prospects of copper based hole transporting materials for planar perovskite solar cells10.1039/C9TC04009A ↗
40. Copper (I) thiocyanate (CuSCN) as a hole-transport material for large-area opto/electronics10.1088/0268-1242/30/10/104002 ↗
41. Improved stability of inverted and flexible perovskite solar cells with carbon electrode10.1021/acsaem.0c00702 ↗
42. All‐carbon‐electrode‐based endurable flexible perovskite solar cells
43. Flexible solar cells based on carbon nanomaterials10.1016/j.carbon.2018.08.017 ↗
44. Properties of electrodeposited CuSCN 2D layers and nanowires influenced by their mixed domain structure10.1021/jp412499f ↗
45. Fabrication of CH3NH3PbI3 perovskite-based solar cells: developing various new solvents for CuSCN hole transport
46. Inorganic hole conducting layers for perovskite-based solar cells10.1021/jz500645n ↗
47. Exclusion of metal oxide by an RF sputtered Ti layer in flexible perovskite solar cells: energetic interface between a Ti layer and an organic charge transporting layer10.1039/C4DT03920C ↗
48. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
49. Extracting single dispersion Cole–Cole impedance model parameters using an integrator setup10.1007/s10470-011-9751-1 ↗
50. Atmospheric effects on the photovoltaic performance of hybrid perovskite solar cells10.1016/j.solmat.2015.01.023 ↗
51. Improved stability of inverted and flexible perovskite solar cells with carbon electrode10.1021/acsaem.0c00702 ↗
52. One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer10.1039/C8TA07332E ↗
53. Solution-processed inorganic copper (I) thiocyanate (CuSCN) hole transporting layers for efficient p–i–n perovskite solar cells10.1039/C5TA04028K ↗
54. Efficient and stable inverted perovskite solar cells incorporating secondary amines
55. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
56. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗