journal article·2019-09Open access

Water-suspended MoO3 nanoparticles prepared by LASIS and fast processing as thin film by ultrasonic spray deposition

Anderson E.X. Gavim, Mariana Richelle Pereira da Cunha, Edna Regina Spada, Thiago Neves Machado, Fabio Seiti Hadano, Arandi Ginane Bezerra, Wido Herwig Schreiner, Paula Cristina Rodrigues, Abd Rashid bin Mohd Yusoff, Andreia Gerniski Macedo, Roberto Mendonça Faria, Wilson José da Silva

Abstract

Abstract Crystalline molybdenum oxide nanoparticles (MoO3 NPs) were prepared by laser ablation synthesis in solution (LASiS). The resulting MoO3 NPs are water suspended with average size of 23 nm. Subsequently, in order to produce hole injection layers for solar cells, these nanoparticles were processed as thin films onto indium tin oxide (ITO)/glass substrate using ultrasonic spray deposition, which allows fast and uniform deposition in large areas with controllable thickness and low roughness; the water is removed by heating the substrate during the processing. Moreover, scanning electronic microscopy images pointed out that the bottom of the films is mainly composed of small nanoparticles. Thereafter, the optimized glass/ITO/MoO3NPs/PTB7:PC71BM/Ca/Al solar cells displayed open circuit voltage (Voc) of 0.75 V, short circuit current density (Jsc) of 13 mA/cm2, fill factor (FF) of 58% and power conversion efficiency of 5.7% under AM1.5 illumination, presenting increased stability when compared with devices having polymeric hole transporting layer. Since LASiS method does not require the use of organic precursors/solvents, it is a green route to produce MoO3 NPs. In addition, the ultrasonic spray deposition is a versatile method to achieve homogeneous and transparent thin films from water suspended nanoparticles. The organic solar cell response pointed out the potential use of these procedures to produce hole injection layers for photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
2. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
3. Influence of electrolyte distribution in PEDOT:PSS based flexible electrochromic devices10.1016/j.cplett.2017.10.022 ↗
4. Efficiency-improved organic solar cells based on plasticizer assisted soft embossed PEDOT:PSS layers10.1039/c2cp42918g ↗
5. Electrospray-deposited vanadium oxide anode interlayers for high-efficiency organic solar cells10.1016/j.orgel.2018.03.017 ↗
6. CoSP approach for the synthesis of blue MoO3 nanoparticles for application as hole transport layer (HTL) in organic solar cells10.1016/j.solener.2017.12.063 ↗
7. Electric field assisted spray deposited MoO3 thin films as a hole transport layer for organic solar cells10.1016/j.solener.2016.08.038 ↗
8. Enhanced charge carrier transport in spray-cast organic solar cells using solution processed MoO3 micro arrays10.1039/C6RA27647D ↗
9. Bulk heterojunction thin film formation by single and dual feed ultrasonic spray method for application in organic solar cells10.1088/1674-4926/37/9/093003 ↗
10. Aqueous PCDTBT:PC71BM photovoltaic inks made by nanoprecipitation10.1002/marc.201700504 ↗
11. Controlled deposition and performance optimization of perovskite solar cells using ultrasonic spray‐coating of photoactive layers10.1002/cssc.201601711 ↗
12. Bilayer and bulk heterojunction solar cells with functional poly(2,2-bithiophene) films electrochemically deposited from aqueous emulsion10.1016/j.synthmet.2013.02.019 ↗
13. Modification of PEDOT:PSS anode buffer layer with HFA for flexible polymer solar cells10.1016/j.cplett.2013.04.022 ↗
14. Graphene synthesis: relationship to applications10.1039/C2NR32629A ↗
15. Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer10.1039/c3cp50994j ↗
16. Electrochromic films produced by ultrasonic spray deposition of tungsten oxide nanoparticles10.1016/j.solmat.2011.03.034 ↗
17. Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells10.1016/j.orgel.2009.03.006 ↗
18. What controls the composition and the structure of nanomaterials generated by laser ablation in liquid solution?10.1039/C2CP42895D ↗
19. Laser synthesis and processing of colloids:fundamentals and applications10.1021/acs.chemrev.6b00468 ↗
20. Moulder · 1992
21. Photocurrent in bulk heterojunction solar cells with similar electron and hole mean free path10.1063/1.4834955 ↗
22. Lithiated MoO3 nanobelts with greatly improved performance for lithium batteries10.1002/adma.200700883 ↗
23. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
24. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics10.1021/ja3026906 ↗
25. Electrochemical and spectroscopic analysis of Mg2+ intercalation into thin film electrodes of layered oxides: V2O5 and MoO310.1021/la402391f ↗
26. Development of hierarchical layered nanostructured α-MoO3 thin films using dc magnetron sputtering10.1088/2053-1591/3/10/106405 ↗
27. XES, XPS and NEXAFS studies of the electronic structure of cubic MoO1.9 and H1.63MoO3 thick films10.1016/S0925-8388(03)00736-9 ↗
28. Different oxidation states of polycrystalline molybdenum treated by O2-plasma or O2-ion bombardment10.1016/S0039-6028(97)00973-4 ↗
29. Tunable plasmon resonance of molybdenum oxide nanoparticles synthesized in non-aqueous media10.1039/C7CC08090E ↗
30. Exfoliation solvent dependent plasmon resonances in two-dimensional sub-stoichiometric molybdenum oxide nanoflakes10.1021/acsami.5b12076 ↗
31. Photo-oxidation of methanol using MoO3/TiO2: catalyst structure and reaction selectivity10.1016/0021-9517(85)90086-7 ↗
32. Self-assembly and photoluminescence of molyddenum oxide nanoparticles10.1007/s00339-011-6345-9 ↗
33. Interface structure of MoO3 on organic semiconductors10.1038/srep21109 ↗
34. Size-dependent electrophoretic deposition of catalytic gold nanoparticles10.1021/jacs.6b09172 ↗
35. Field effect biosensing platform based on 2D αMoO310.1021/nn403241f ↗
36. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
37. MoO3 Thickness, Thermal annealing and solvent annealing effects on inverted and direct polymer photovoltaic solar cells10.3390/ma5122521 ↗
38. Influence of precursor solution volume on the properties of spray deposited α-MoO3 thin films10.1016/j.ceramint.2013.11.022 ↗
39. Reactively sputtered MoO3 films for ammonia sensing10.1016/S0040-6090(03)00524-8 ↗
40. Semiconductor MoO3–TiO2 thin film gas sensors10.1016/S0925-4005(01)00737-7 ↗
41. Effect of MoO3 as an interlayer on the performance of organic solar cells based on ZnPc and C6010.1016/j.synthmet.2011.10.014 ↗
42. Role of the deep-lying electronic states of in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
43. Effect of contamination on the electronic structure and hole-injection properties of semiconductor interfaces10.1063/1.3374333 ↗
44. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
45. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
46. Aqueous solution-processed MoO3 as an effective interfacial layer in polymer/fullerene based organic solar cells10.1016/j.orgel.2012.12.016 ↗
47. Functional solid additive modified PEDOT:PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells10.1038/srep45079 ↗
48. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
49. Combined effects of MoO3 interlayer and PC70BM on polymer photovoltaic device performance10.1016/j.orgel.2010.02.006 ↗