Selection of metal substrates for completely solution-processed inverted organic photovoltaic devices
Source abstract
Abstract
The advantages of high mechanical flexibility of organic polymers that are suitable for the roll-to-roll processing technique have recently assisted its fast progress towards fabricating large-area organic photovoltaic (OPV) devices on flexible substrates including plastics and metals. We fabricated the inverted OPV devices on various metals namely: stainless steel (SS), titanium coated steel (Ti-S), chromium coated aluminium (Cr-Al), and aluminium (Al). Around 3.1% power conversion efficiency (PCE) was achieved on the SS and Cr-Al substrates for the poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methylester (P3HT:PCBM) OPV devices while only 1.48% PCE of the OPV devices was obtained on the Ti-S substrate and no effective devices were presented on the Al substrate. Morphologies of the metal substrates and the active P3HT:PCBM layer were investigated by the scanning electron microscope (SEM) and the tapping mode atomic force microscope (AFM), separately. We revealed why different metal substrates can provide significantly different performance for the inverted OPV devices by the electrical impedance spectroscopy (EIS).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. All-spin-coating vacuum-free processed semi-transparent inverted polymer solar cells with PEDOT:PSS anode and PAH-D interfacial layer10.1016/j.orgel.2010.04.012 ↗
2. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
3. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
4. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
5. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
6. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
7. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
8. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
9. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
10. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
11. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
12. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
13. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
14. Effect of sheet resistance and morphology of ITO thin films on polymer solar cell characteristics10.1155/2012/879261 ↗
15. Flexible polymer photovoltaic devices prepared with inverted structures on metal foils10.1109/LED.2009.2022345 ↗
16. Large area ITO-free organic solar cells on steel substrate10.1016/j.orgel.2012.09.039 ↗
17. Top-illuminated organic solar cells fabricated by vacuum-free and all-solution processes10.1016/j.solmat.2012.09.020 ↗
18. Long term stability of efficient inverted P3HT:PCBM solar cell10.1016/j.solmat.2008.12.022 ↗
19. All-solution-processed ITO-free polymer solar cells fabricated on copper sheets10.1016/j.solmat.2011.09.058 ↗
20. All solution processing of ITO-free organic solar cell modules directly on barrier foil10.1016/j.solmat.2012.07.004 ↗
21. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
22. Highly efficient inverted rapid-drying blade-coated organic solar cells10.1016/j.orgel.2011.12.025 ↗
23. Optimization of a polymer top electrode for inverted semitransparent organic solar cells10.1016/j.orgel.2011.02.017 ↗
24. Organic solar cells with inverted layer sequence incorporating optical spacers-simulation and experiment
25. Plasmonic Au nanoparticles for enhanced broadband light absorption in inverted organic photovoltaic devices by plasma assisted physical vapour deposition10.1016/j.orgel.2012.11.027 ↗
26. Temperature and time dependence of heat treatment of RR–P3HT/PCBM solar cells10.1016/j.synthmet.2005.07.010 ↗
27. Impedance spectrometry of optimized standard and inverted P3HT–PCBM organic solar cells10.1016/j.solmat.2012.01.013 ↗
28. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
29. Mott–Schottky analysis and impedance spectroscopy of TiO2/6T and ZnO/6T devices10.1021/jp8013964 ↗