Effect of global damp heat ageing on debonding of crosslinked EVA- and POE-glass laminates
Source abstract
Abstract
Polyolefin elastomers (POE) have been established as a promising alternative to commonly used peroxide crosslinked ethylene vinyl acetate copolymer (EVA) photovoltaic encapsulation materials. The main objective of this work was to assess the long-term ageing behavior of double-glass laminates based on UV-transparent EVA and POE under damp heat (85 °C, 85 %rh) conditions for up to 10,000h. Ageing induced changes were characterized by microscopy, UV–visible–near infrared (UVVISNIR) spectroscopy, compressive shear testing (CST), differential scanning calorimetry (DSC), macro- and microscopic Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Within the laminates, the formation of birefringent spheric microdomains (maltese-crosses) was confirmed after an exposure time of more than 2,000h. The compressive shear behavior of EVA laminates was not significantly affected by damp heat ageing. Interestingly, the POE laminates revealed an even improved compressive shear performance. Whereas the tested EVA laminates failed in an interfacial manner independent on damp heat ageing time, POE laminates exhibited a failure mode transition from interfacial (unaged) to combined interfacial and cohesive (10,000h). On the interfacially fractured surfaces of EVA and POE laminates, carboxylic acid groups were ascertained. Deprotonated silanol and water bands were discernible on the opposite glass sides. Damp heat exposure of POE laminates for 10,000h resulted in pronounced glass ageing close to the interface associated with a partly cohesive failure within glass. This phenomenon was quite different to EVA and was attributed to the alkaline characteristics of the hindered amine light (HALS) stabilized, less-polar, UV-transparent POE encapsulant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. 2014
2. Defining threshold values of encapsulant and backsheet adhesion for PV module reliability
3. Methodology for local ageing and damage development characterization of solar glass/encapsulant interfaces under superimposed fatigue stresses and environmental influences10.1016/j.solmat.2022.112017 ↗
4. Comparison of degradation behavior of newly developed encapsulation materials for photovoltaic applications under different artificial ageing tests10.3390/polym13020271 ↗
5. Visual degradation in field-aged crystalline silicon PV modules in India and correlation with electrical degradation10.1109/JPHOTOV.2014.2356717 ↗
6. 2017
7. Early‐stage identification of encapsulants photobleaching and discoloration in crystalline silicon photovoltaic module laminates10.1002/pip.3269 ↗
8. Photovoltaic module performance and durability following long-term field exposure
9. Environment assisted cyclic fatigue crack growth testing of polymer/inorganic laminates under strain energy release rate control10.1016/j.ijfatigue.2023.107676 ↗
10. Pugstaller · 2021
11. Dependence of adhesion on degradation mechanisms of ethylene co-vinyl acetate encapsulants over the lifetime of photovoltaic modules
12. PV encapsulant formulations and stress test conditions influence dominant degradation mechanisms10.1016/j.solmat.2023.112319 ↗
13. Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules
14. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
15. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
16. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
17. Polyolefin as PID-resistant encapsulant material in PV modules10.1016/j.solmat.2015.10.009 ↗
18. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules10.1002/pip.3323 ↗
19. Comparison of crosslinking kinetics of UV-transparent ethylene-vinyl acetate copolymer and polyolefin elastomer encapsulants10.3390/polym14071441 ↗
20. Quantifying the influence of encapsulant and backsheet composition on PV‐power and electrical degradation
21. Investigation of damp heat effects on glass properties for photovoltaic applications, Corrosion Engineering
22. Infrared characteristic bands of highly dispersed silica10.1007/BF01500878 ↗
23. Surficial siloxane-to-silanol interconversion during room-temperature hydration/dehydration of amorphous silica films observed by ATR-IR and TIR-Raman spectroscopy10.1021/acs.langmuir.5b04506 ↗
24. Influence of thermal treatment on the water release and the glassy structure of perlite10.1007/s10853-006-0325-z ↗
25. FTIR investigation of EVA chemical bonding environment and its impact on debond energy10.1109/JPHOTOV.2019.2904219 ↗
26. Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions10.1002/pip.2270 ↗
27. Analysis of a compressive shear test for adhesion between elastomeric polymers and rigid substrates10.1023/A:1007617102311 ↗
28. A convenient apparatus for the estimation of apparent shear strength of composite materials10.1023/A:1008919114960 ↗
29. Degradation in photovoltaic encapsulation strength of attachment: results of the first PVQAT TG5 artificial weathering study10.1002/pip.3255 ↗
30. Effects of humidity and the presence of moisture at the bond-line on the interfacial separation of laminated glass for flat glass Re-use
31. Structure–property correlations of polymeric films for transparent insulation wall applications. Part 1: solar optical properties10.1016/j.solener.2005.05.006 ↗
32. Terrestrial solar spectral data sets10.1016/0038-092X(83)90068-3 ↗
33. Optical properties of highly transparent polypropylene cast films: influence of material structure, additives, and processing conditions10.1002/pen.20503 ↗
34. Advanced characterization of laminated electrical steel structures under shear loading10.1080/00218464.2018.1450747 ↗
35. Degradation in photovoltaic encapsulant transmittance: results of the first PVQAT TG5 artificial weathering study10.1002/pip.3103 ↗
36. Development of a method for vapour phase trimethylsilylation of surface hydroxyl groups
37. The interaction of waterborne epoxy/dicyandiamide varnishes with metal oxides10.3390/polym14112226 ↗
38. Pseudomorphic transformation of amorphous calcium carbonate films follows spherulitic growth mechanisms and can give rise to crystal lattice tilting10.1039/C5CE00441A ↗
39. Degradation in photovoltaic encapsulant transmittance: results of the second PVQAT TG5 artificial weathering study10.1002/pip.3551 ↗
40. Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints10.1016/0143-7496(95)91624-F ↗
41. Water-assisted sub-critical crack growth along an interface between polyimide passivation and epoxy underfill10.1023/A:1011049523550 ↗
42. In situ infrared spectroscopic and scanning Kelvin probe measurements of water and ion transport at polymer/metal interfaces10.1016/j.electacta.2005.09.024 ↗
43. Effect of vinylacetate content on crystallinity and second-order transitions in ethylene vinylacetate copolymers10.1002/(SICI)1097-4628(19970606)64:10<1903::AID-APP4>3.0.CO;2-M ↗
44. Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules10.1016/j.polymdegradstab.2017.03.010 ↗
45. Effect of vinyl acetate content on the photovoltaic‐encapsulation performance of ethylene vinyl acetate under accelerated ultra‐violet aging10.1002/app.48268 ↗
46. Structure and property relationships in ethylene–vinyl acetate copolymers10.1002/pol.1971.150091101 ↗
47. Specular reflectance (SR) and attenuated total reflectance (ATR) infrared (IR) spectroscopy of transparent flat glass surfaces: a case study for soda lime float glass10.1016/j.jnoncrysol.2015.08.015 ↗
48. An alternative and simple method for the preparation of bare silica nanoparticles using sugarcane waste ash, an abundant and despised residue in the Brazilian industry
49. Detection of LO modes in glass by infrared reflection spectroscopy at oblique incidence10.1103/PhysRevB.45.161 ↗
50. Damp heat resilient thermoplastic polyolefin encapsulant for photovoltaic module encapsulation10.1016/j.solmat.2021.111024 ↗
51. Electrodeposition of oriented cerium oxide films10.1155/2013/482187 ↗
52. Surface vibrational structure of colloidal silica and its direct correlation with surface charge density10.1021/acs.langmuir.5b00418 ↗
53. Comparing amorphous silica, short-range-ordered silicates and silicic acid species by FTIR10.1038/s41598-022-15882-4 ↗
54. Formation and properties of inorganic Si-contaminant compounds10.1016/j.envpol.2020.115032 ↗
55. Evaluation of the aging behavior of ethylene copolymer films for solar applications under accelerated weathering conditions10.1016/j.solener.2009.01.009 ↗
56. Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods10.1016/j.biosystemseng.2009.05.003 ↗
57. G. Säckl, D. Stifter, G. M. Wallner, XPS Analysis of Ethylene-Based Encapsulants and Damp Heat Aged Fractured Glass Laminate Surfaces. In Preparation..