Organic-inorganic hybrid electron transport layer of PVP-doped SnO2 for high-efficiency stable perovskite solar cells
Source abstract
Abstract
SnO 2 is one of the most popular low-cost inorganic electron transport materials for perovskite solar cells. However, the agglomeration of SnO 2 nanoparticles causes their uneven distribution and the existence of pinholes, seriously hindering the electron migration across SnO 2 /perovskite interface and limiting the device performance. The poor wettability between the SnO 2 film and the perovskite precursor solution also impairs the growth of perovskite grains. In this work, an innovative strategy was employed to produce an organic-inorganic hybrid electron transport layer (ETL) by fabricating a high-quality polyvinylpyrrolidone (PVP)/SnO 2 perovskite film with few defects and good wettability. In turn, a PVP-SnO 2 based device exhibits elevated power conversion efficiency (PCE) (18.98%) and adequate reproducibility along with superior operational stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A. Miyata, A. Mitioglu, P. Plochocka, O. Portugall, J.T.-W. Wang, S.D. Stranks, H.J. Snaith, R.J. Nicholas, Direct measurement of the exciton binding energy and effective masses for charge carriers in organic–inorganic tri-halide perovskites, Nat. Phys., 11 582-587.10.1038/nphys3357 ↗
2. Electron-Hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
3. Recent progress and challenges of organometal halide perovskite solar cells10.1088/0034-4885/79/2/026501 ↗
4. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
5. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
6. A fabrication process for flexible single-crystal perovskite devices10.1038/s41586-020-2526-z ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
9. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
10. High‐efficiency perovskite solar cells based on the black polymorph of HC(NH2)2PbI310.1002/adma.201401137 ↗
11. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
12. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
13. A Eu3+ -Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells10.1126/science.aau5701 ↗
14. Dual defect‐passivation using phthalocyanine for enhanced efficiency and stability of perovskite solar cells
15. Stabilizing the efficiency beyond 20% with a mixed cation perovskite solar cell fabricated in ambient air under controlled humidity10.1002/aenm.201700677 ↗
16. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
17. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
18. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide10.1039/C6EE02390H ↗
19. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide10.1126/science.aay7044 ↗
20. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21
21. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
22. Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells10.1126/science.aam6620 ↗
23. Surface rutilization of anatase TiO2 for efficient electron extraction and stable P max output of perovskite solar cells10.1016/j.chempr.2018.01.018 ↗
24. Influence of charge transport layers on open-circuit voltage and hysteresis in perovskite solar cells10.1016/j.joule.2018.02.013 ↗
25. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
26. A wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
27. Low temperature solution-processed Sb:SnO2 nanocrystals for efficient planar perovskite solar cells10.1002/cssc.201600944 ↗
28. SnO2-in-Polymer matrix for high-efficiency perovskite solar cells with improved reproducibility and stability10.1002/adma.201805153 ↗
29. Multifunctional polymer‐regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells
30. How to make over 20% efficient perovskite solar cells in regular (n–i–p) and inverted (p–i–n) architectures10.1021/acs.chemmater.8b00136 ↗
31. Novel molecular doping mechanism for n‐doping of SnO2 via triphenylphosphine oxide and its effect on perovskite solar cells10.1002/adma.201805944 ↗
32. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
33. Poly(vinylpyrrolidone)-doped SnO2 as an electron transport layer for perovskite solar cells with improved performance10.1039/C9TC04269E ↗
34. Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells10.1126/sciadv.1700106 ↗
35. Poly (4‐Vinylpyridine)‐Based interfacial passivation to enhance voltage and moisture stability of lead halide perovskite solar cells10.1002/cssc.201700271 ↗
36. Amorphous polymer with C=O to improve the performance of perovskite solar cells10.1039/C7TC02954C ↗
37. Hysteresis index: a figure without merit for quantifying hysteresis in perovskite solar cells10.1021/acsenergylett.8b01627 ↗
38. Enhanced efficiency and stability of planar perovskite solar cells by introducing amino acid to SnO2/perovskite interface10.1016/j.jpowsour.2020.227974 ↗
39. High‐efficient flexible perovskite solar cells with low temperature TiO2 layer via UV/Ozone photo‐annealing treatment
40. Bi-Directional functionalization of urea-complexed SnO2 for efficient planar perovskite solar cells10.1016/j.apsusc.2020.148711 ↗
41. Work‐function‐tunable chlorinated graphene oxide as an anode interface layer in high‐efficiency polymer solar cells10.1002/aenm.201400591 ↗
42. Enhanced stability and optoelectronic properties of MAPbl3 films by a cationic surface-active agent for perovskite solar cells10.1039/C8TA00457A ↗
43. Efficiency improved for inverted polymer solar cells with electrostatically self-assembled BenMelm-Cl ionic liquid layer as cathode interface layer10.1016/j.nanoen.2015.02.032 ↗
44. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
45. Improved electron transport in MAPbI3 perovskite solar cells based on dual doping graphdiyne10.1016/j.nanoen.2018.02.014 ↗
46. Achieving high open-circuit voltage on planar perovskite solar cells via chlorine doped tin oxide electron transport layers10.1021/acsami.9b03873 ↗
47. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
48. Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency10.1016/j.nanoen.2021.106285 ↗
49. Simultaneous contact and grain‐boundary passivation in planar perovskite solar cells using SnO2‐KCl composite electron transport layer10.1002/aenm.201903083 ↗
50. Improving the stability and performance of perovskite solar cells via off-the-shelf post-device ligand treatment10.1039/C8EE00580J ↗
51. Constructing efficient and stable perovskite solar cells via interconnecting perovskite grains10.1021/acsami.7b08488 ↗
52. A biopolymer heparin sodium interlayer anchoring TiO2 and MAPbI3 enhances trap passivation and device stability in perovskite solar cells10.1002/adma.201706924 ↗