journal article·2021-06Open access

Thermomechanical fatigue resistance of low temperature solder for multiwire interconnects in photovoltaic modules

Laura Spinella, Nick Bosco

Abstract

Abstract Novel interconnect technologies leveraging low melting temperature solders, such as multiwire interconnects, are being deployed in photovoltaic (PV) modules for improved reliability through interconnect redundancy and lower thermal loads during interconnection and lamination. However, the equivalency of standardized accelerated testing to field conditions has not yet been established for these emerging technologies. In this study, the thermomechanical fatigue resistance of low temperature solder alloys is investigated and compared to that of conventional SnPb to assess the acceleration behavior of these alloys. While InSn is shown to have sufficient thermomechanical fatigue resistance on the order of that of SnPb, these results indicate Sn–Bi alloys may have poor thermomechanical fatigue resistance at field conditions. The results also show that Sn–Bi alloys have thermal cycling acceleration factors of less than one. This indicates that the standardized accelerated thermal cycling test, such as that in IEC 61215, will produce misleading results for Sn–Bi alloys and that unique testing is required for this PV module architecture. Though accelerated thermal cycling may be a meaningful qualification test for SnPb solder joints, these results suggest that mechanical loading may be a more appropriate test for Sn–Bi multiwire interconnects. This is due to the distinct processing and geometry of multiwire interconnects which may allow for mechanical, rather than strictly metallurgical interconnections.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Low cycle fatigue behavior and mechanisms of a eutectic Sn-Pb solder 63Sn/37Pb10.1016/S0142-1123(01)00186-4 ↗
2. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
3. Thermo-mechanical deformation degradation of crystalline silicon photovoltaic (c-Si PV) module in operation10.1016/j.engfailanal.2017.11.009 ↗
4. Evaluation of thermo-mechanical damage and fatigue life of solar cell solder interconnections10.1016/j.rcim.2016.12.008 ↗
5. The influence of PV module materials and design on solder joint thermal fatigue durability
6. Climate specific thermomechanical fatigue of flat plate photovoltaic module solder joints10.1016/j.microrel.2016.03.024 ↗
7. Encapsulant-integrated interconnection of bifacial solar cells for BIPV applications: latest results in the twill-BIPV project
8. Smartwire solar cell interconnection technology
9. Advanced metallization enabled by smart-wire interconnection for silicon heterojunction cells
10. Single-step fabrication of a photovoltaic module using encapsulants with low melting temperature metal ribbons embedded
11. Interconnection technologies for high reliable bifacial heterojuntion glass/glass photovoltaic modules
12. Low temperature lead free solder pastes for shingling interconnection
13. Thermal fatigue behavior of low melting point solder joints10.1108/eb037812 ↗
14. Metallurgy of low temperature Pb-free solders for electronic assembly10.1179/imr.1995.40.2.65 ↗
15. Alloying influences on low melt temperature SnZn and SnBi solder alloys for electronic interconnections10.1016/j.jallcom.2016.01.006 ↗
16. Reliability of controlled collapse interconnections10.1147/rd.133.0266 ↗
17. Norris–landzberg acceleration factors and goldmann constants for SAC305 lead-free electronics10.1115/1.4006863 ↗
18. Acceleration factors of lead-free solder materials10.1109/TCAPT.2007.900076 ↗
19. Reliability testing of Ni-modified SnCu and SAC305 - accelerated thermal cycling
20. An acceleration model for lead-free (SAC) solder joint reliability under thermal cycling
21. Studying the lifetime of crystalline PV modules by interpreting acceleration test data with statistical reliability models
22. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
23. Effect of temperature and strain rate on low-cycle fatigue life of Bi-Sn eutectic alloy
24. Endurance of smart wires
25. Low cost high energy yield solar module lines and its applications