Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells
Source abstract
Abstract
Abstract Optically transparent p-type materials play a critical role in transparent electronics including photovoltaic (PV) devices. P-type sulfide materials offer an alternative to oxides for PV application due to improved hole transport properties. Here, we report the solution-based synthesis of earth-abundant p-type transparent conducting barium copper sulfide (α-BaCu4S3, BCS) thin films. These films were characterized using scanning electron microscopy, X-ray diffraction, UV–Vis–NIR spectrophotometry, Raman spectroscopy, and spectroscopic ellipsometry. BCS films of ~100 nm thickness transmit >70% of visible light. We report on tests of the hole transport properties of these BCS films for cadmium telluride (CdTe) photovoltaics, finding that the BCS deposition process forms a beneficial tellurium (Te) rich surface on CdTe by selectively removing Cd from the surface. Based on our study, the BCS interface layer plays dual functions for CdTe PV devices as a hole transport material and as an etchant, enhancing the resulting device performance. We observed a significant increase in open-circuit voltage of CdTe solar cells with the BCS buffer layer. Additionally, we discuss semitransparent CdTe solar cells with BCS as a hole transport layer and indium tin oxide as a finishing electrode. Semitransparent CdTe solar cells shows 13.3% conversion efficiency for the front side illumination and 1.2% efficiency for back side illumination, indicating high recombination of charge carriers generated close to the rear CdTe/BCS/ITO contact.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Facchetti · 2010
2. Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors10.1038/nature03090 ↗
3. Electronic band structure of indium tin oxide and criteria for transparent conducting behavior10.1103/PhysRevB.64.233111 ↗
4. Fluorine-doped tin oxide surfaces modified by self-assembled alkanethiols for thin-film devices10.1016/j.apsusc.2013.04.025 ↗
5. P-type electrical conduction in transparent thin films of CuAlO210.1038/40087 ↗
6. Chemical bath deposition of p-type transparent, highly conducting (CuS)x:(ZnS)1–x nanocomposite thin films and fabrication of Si heterojunction solar cells10.1021/acs.nanolett.5b05124 ↗
7. Nanocomposite (CuS) x(ZnS)1-x thin film back contact for CdTe solar cells: toward a bifacial device10.1016/j.solmat.2018.06.025 ↗
8. 13% CdS/CdTe solar cell using a nanocomposite (CuS)x (ZnS)1-x thin film hole transport layer
9. Transparent p-type conducting BaCu2S2 films10.1063/1.1485133 ↗
10. Solution-processed p-type transparent conducting BaCu2S2 thin film10.1021/cm070235a ↗
11. Optoelectronic properties of strontium and barium copper sulfides prepared by combinatorial sputtering10.1021/acs.chemmater.7b02475 ↗
12. Zunger · Practical doping principles · 2003 · 83 · 57
13. Highly enhanced p-type electrical conduction in wide band gap Cu1+xAl1−xS2 polycrystals10.1016/j.solmat.2011.05.031 ↗
14. A p-type thermoelectric material BaCu4S3 with high electronic band degeneracy10.1063/1.5099291 ↗
15. Bifacial CdS/CdTe Solar Cell using Transparent Barium Copper Sulfide as a Hole Transport Layer
16. The abundances of chemical elements in urban soils10.1016/j.gexplo.2014.08.003 ↗
17. Effects of Cu on CdTe/CdS heterojunction solar cells with Au/Cu contacts10.1149/1.2043891 ↗
18. Controlling band Alignment at the back interface of cadmium telluride solar cells using ZnTe and Te buffer
19. Controlled activation of ZnTe: Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
20. Novel P-type conductive semiconductor nanocrystalline film as the back electrode for high-performance thin film solar cells10.1021/acs.nanolett.5b04510 ↗
21. Structural, optical, and hole transport properties of earth-abundant chalcopyrite (CuFeS2) nanocrystals10.1557/mrc.2018.117 ↗
22. Selective Cd removal from CdTe for high-efficiency Te back-contact formation
23. Wet chemical etching of cadmium telluride photovoltaics for enhanced open-circuit voltage, fill factor, and power conversion efficiency10.1557/jmr.2019.363 ↗
24. Improved CdTe Solar-Cell Performance with an Evaporated Te Layer before the Back Contact10.1557/adv.2017.403 ↗
25. The role of back buffer layers and absorber properties for> 25% efficient CdTe solar cells10.1021/acsaem.9b00367 ↗
26. Understanding and Advancing Bifacial Thin Film Solar Cells10.1021/acsaem.0c00851 ↗
27. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
28. Substrate configuration, bifacial CdTe solar cells grown directly on transparent single wall carbon nanotube back contacts10.1016/j.solmat.2016.05.001 ↗
29. Preparation and characteristics of MoSe2 interlayer in bifacial Cu(In, Ga)Se2 solar cells10.1016/j.phpro.2012.03.571 ↗
30. Ropp · 2012
31. The beer-lambert law10.1021/ed039p333 ↗
32. Quantifying the accuracy of ellipsometer systems10.1002/pssc.200777755 ↗
33. Optical physics of materials
34. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen substanzen10.1002/andp.19354160705 ↗
35. Near infrared to ultraviolet optical properties of bulk single crystal and nanocrystal thin film iron pyrite10.1088/0957-4484/27/29/295702 ↗
36. Optical properties of soda lime float glass from 3 mm to 148 nm (0.41 meV to 8.38 eV) by spectroscopic ellipsometry10.1116/1.5024390 ↗
37. Dielectric function and double absorption onset of monoclinic Cu2SnS3: origin of experimental features explained by first-principles calculations10.1016/j.solmat.2016.04.028 ↗
38. Effect of film thickness on microstructure parameters and optical constants of CdTe thin films10.1016/j.jallcom.2009.04.033 ↗
39. Laser processing for thin film chalcogenide photovoltaics: a review and prospectus10.1117/1.JPE.5.050999 ↗
40. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
41. Solution-Processed trigonal Cu2BaSnS4 thin-film solar cells10.1021/acsaem.8b00514 ↗
42. Improvement of composition of CdTe thin films during heat treatment in the presence of CdCl210.1007/s10854-016-5802-9 ↗
43. Photo-assisted electrodeposition of polypyrrole back contact to CdS/CdTe solar cell structures10.1016/j.tsf.2013.01.064 ↗
44. Composition dependence of structural and optical properties of Cd1− xZnxTe thick films obtained by the close-spaced sublimation10.1016/j.jallcom.2016.05.065 ↗
45. Raman scattering study of the properties and removal of excess Te on CdTe surfaces10.1063/1.95367 ↗
46. Rasband · 2011
47. The roles of ZnTe buffer layers on CdTe solar cell performance10.1016/j.solmat.2015.12.019 ↗
48. CdTe solar cell in a novel configuration10.1002/pip.525 ↗
49. Increased efficiency in multijunction solar cells through the incorporation of semimetallic ErAs nanoparticles into the tunnel junction10.1063/1.2196059 ↗
50. All-organic tunnel junctions as connecting units in tandem organic solar cell10.1063/1.3033485 ↗
51. Carrier diffusion and radiative recombination in CdTe thin films10.1063/1.1515882 ↗
52. Minority carrier lifetime analysis in the bulk of thin-film absorbers using subbandgap (two-photon) excitation
53. The effects of hydrogen iodide back surface treatment on CdTe solar cells10.1002/solr.201800304 ↗