journal article·2018-08

Assessment of the long-term performance of partly covered photoelectrochromic devices under insolation and in storage

A. Dokouzis, K. Theodosiou, G. Leftheriotis

Publisher page

Abstract

Abstract This work comprises an experimental study of the long-term performance and stability of partly covered photoelectrochromic (PEC) devices under various operating conditions. The most durable PEC device was tested for nearly one year in open circuit storage in the dark exhibiting a 26% reduction in the power conversion efficiency of the photovoltaic (PV) unit. As regards optical performance, it was found to gradually converge to a contrast ratio of about 1.5:1, having passed through a transitional period of about 80 days, that caused a decrease in the coloration depth, without affecting reversibility. This gradual loss of coloration depth was attributed to the reaction of photoelectrons with triiodide ions at the electrochromic WO3 film-electrolyte interface, that takes place prior to the formation of the colored LixWO3 tungsten bronze, and is enhanced while the liquid electrolyte wets the WO3 film. This phenomenon was also observed in “redox” type electrochromic devices, verifying the proposed loss mechanism. PEC devices were also exposed to insolation in short (SC) and open (OC) circuit conditions. The PEC device tested in SC operation for more than four months, exhibited a contrast ratio comparable to that of the devices kept in storage, although an 80% reduction in the power conversion efficiency of the PV element has been observed. On the other hand, OC operation of 3 months did not affect the performance of the PV element, but, resulted in irreversible coloration of the device tested, due to trapping of Li ions within the WO3 matrix. Having identified the causes for the observed adverse phenomena, remedies can be sought, such as thin film barrier layers to prevent the loss of photoelectrons to the electrolyte, modified electrolytes to enhance the PV element stability, avoidance of prolonged OC operation to prevent irreversible coloration. Indeed, a 60 nm thick ZnS barrier deposited on top of the WO3 film was found to effectively suppress the loss current reactions, doubling the contrast ratio of the stabilized PEC devices to 2.8:1, at the expense of coloration speed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Εuropean Commision, 〈https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings〉, 2016.
2. Directive 2010/31/EU of the European Parliament and of the council of 19 May on the energy performance of buildings (recast), Off. J. Eur. Union, L 153/13, 2010.
3. Forthcoming perspectives of photoelectrochromic devices: a critical review10.1039/C6EE01514J ↗
4. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
5. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
6. Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort10.1016/j.enbuild.2012.10.057 ↗
7. Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate10.1016/j.enbuild.2012.12.031 ↗
8. Electrochromic glazing and facade photovoltaic panels: a strategic assessment of the potential energy benefits10.1177/1477153507083906 ↗
9. Regional performance targets for transparent near-infrared switching electrochromic window glazings10.1016/j.buildenv.2012.12.004 ↗
10. Modeling of optical and energy performance of tungsten-oxide-based electrochromic windows including their intermediate states10.1016/j.solmat.2012.09.010 ↗
11. S.E. Selkowitz, M. Rubin, E.S. Lee, R. Sullivan, A review of electrochromic window performance factors, in: Proceeedings of the SPIE International Symposium on Optical Materials Technology for Solar Energy Conversion XIII, Lawrence Berkeley National Laboratory, Freiberg, Germany, 1994.10.1117/12.185373 ↗
12. ‘‘Partly covered photoelectrochromic devices with enhanced coloration speed and efficiency”10.1016/j.solmat.2011.09.014 ↗
13. A new design paradigm for smart windows: photocurable polymers for quasi-solid photoelectrochromic devices with excellent long-term stability under real outdoor operating conditions10.1002/adfm.201503762 ↗
14. Performance and stability of “partly covered” photoelectrochromic devices for energy saving and power production10.1016/j.ssi.2015.04.010 ↗
15. Comparison of photoelectrochromic devices with different layer configurations10.1149/1.1496487 ↗
16. Tandem dye-sensitized solar cell-powered electrochromic devices for the photovoltaic-powered smart window10.1016/j.jpowsour.2006.12.114 ↗
17. Photoelectrochromic window with Pt catalyst10.1016/j.tsf.2005.07.291 ↗
18. Switchable windows with tungsten oxide10.1016/j.vacuum.2007.10.020 ↗
19. Fast-Switching Photovoltachromic Cells with Tunable Transmittance10.1021/nn900428s ↗
20. A fast-switching light-writable and electric-erasable negative photoelectrochromic cell based on Prussian blue films10.1016/j.solmat.2011.10.030 ↗
21. A novel photoelectrochromic device based on poly(3,4-(2,2-dimethylpropylenedioxy)thiophene) thin film and dye-sensitized solar cell10.1016/j.solmat.2011.09.038 ↗
22. Design of a new energy-harvesting electrochromic window based on an organic polymeric dye, a cobalt couple, and PProDOT-Me210.1002/aenm.201400379 ↗
23. Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes10.1002/polb.23038 ↗
24. Fabrication of stable photovoltachromic cells using a solvent-free hybrid polymer electrolyte10.1039/C4NR01695E ↗
25. Multichromophoric electrochromic polymers: colour tuning of conjugated polymers through the side chain functionalization approach10.1039/C4CC00163J ↗
26. Multicolored electrochromism in polymers: structures and devices10.1021/cm049669l ↗
27. Dyer · 2013 · 113
28. Orange and red to transmissive electrochromic polymers based on electron-rich dioxythiophenes10.1021/ma100366y ↗
29. A neutral state yellow to navy polymer electrochrome with pyrene scaffold10.1016/j.orgel.2011.05.016 ↗
30. Poly(3,4-propylenedioxythiophene)s as a single platform for full color realization10.1021/ma102580x ↗
31. Propylenedioxythiophene (ProDOT)–phenylene copolymers allow a yellow-to-transmissive electrochrome10.1039/c0py00405g ↗
32. Switchable window based on electrochromic polymers10.1557/JMR.2004.0259 ↗
33. Perovskite photovoltachromic cells for building integration10.1039/C5EE00896D ↗
34. A simple method for the fabrication of WO3 films with electrochromic and photocatalytic properties10.1016/j.tsf.2014.10.087 ↗
35. Photocoloration efficiency and stability of photoelectrochromic devices10.1016/j.ssi.2012.10.024 ↗
36. Photoelectrochromic devices based on sputtered WO3 and TiO2 films10.1016/j.solmat.2017.01.016 ↗
37. Dokouzis Alexandros-Panagiotis, Investigation of the Factors Affecting the Performance of PEC Devices (M.Sc. thesis), Physics Department, University of Patras, available at 〈http://nemertes.lis.upatras.gr〉.
38. Development of photoelectrochromic devices for dynamic solar control in buildings10.1016/j.solmat.2010.07.030 ↗
39. Dye-sensitized solar cells10.1021/cr900356p ↗
40. An efficient and low-cost TiO2 compact layer for performance improvement of dye-sensitized solar cells10.1016/j.electacta.2008.09.025 ↗
41. “Influence of alkylaminopyridine additives in electrolytes on dye-sensitized solar cell performance10.1016/j.solmat.2003.09.001 ↗
42. Electrochromic device modeling using an adaptive neuro-fuzzy inference system: a model-free approach10.1016/j.enbuild.2015.10.045 ↗
43. Sputtered Si3N4 and SiO2 electron barrier layer between a redox electrolyte and the WO3 film in electrochromic devices10.1016/j.solmat.2016.08.023 ↗
44. Ageing of DSSC studied by electroluminescence and transmission imaging10.1016/j.solmat.2013.05.029 ↗
45. Improvement in long-term stability of dye-sensitized solar cell for outdoor use10.1016/j.solmat.2010.04.019 ↗
46. Galvanostatic ion detrapping rejuvenates oxide thin films10.1021/acsami.5b09430 ↗
47. Eliminating degradation and uncoveringion-trapping dynamics in electrochromic WO3 thin films10.1038/nmat4368 ↗
48. Eliminating degradation and uncovering ion-trapping dynamics in electrochromic WO3 thin films10.1021/acs.chemmater.6b01503 ↗
49. Sustainable rejuvenation of electrochromic WO3 films10.1021/acsami.5b09035 ↗
50. Atomistic conversion reaction mechanism of WO3 in secondary ion batteries of Li, Na, and Ca10.1002/anie.201601542 ↗
51. The effect of water on the electrochromic properties of WO3 films prepared by vacuum and chemical methods10.1016/j.solmat.2004.02.019 ↗
52. Heterogeneous photocatalyst materials for water splitting10.1039/B800489G ↗
53. Determination of the optical constants of MgF2 and ZnS from spectrophotometric measurements and the classical oscillator method10.1364/AO.27.002549 ↗
54. Optical indices of electrochromic tungsten oxide10.1016/S0040-6090(97)00254-X ↗
55. Integrated low-emittance-electrochromic devices incorporating ZnS/Ag/ZnS coatings as transparent conductors10.1016/S0927-0248(99)00101-4 ↗