journal article·2017-12Open access

Spectrally resolved nonlinearity and temperature dependence of perovskite solar cells

Markus Mundus, Bhavana Venkataramanachar, Robert Gehlhaar, Markus Kohlstädt, Bjoern Niesen, Weiming Qiu, Jan Philipp Herterich, Florent Sahli, Matthias Bräuninger, Jérémie Werner, Jochen Hohl-Ebinger, Griet Uytterhoeven, Uli Würfel, Christophe Ballif, Martin C. Schubert, Wilhelm Warta, Stefan W. Glunz

Abstract

Abstract An accurate electrical device characterization of hybrid organic-inorganic halide perovskite solar cells (PSCs) is an important prerequisite for further improvement and industrial transfer of this promising photovoltaic technology. In this work, we study the nonlinearity of current versus irradiance as well as the temperature dependence of PSCs in a spectrally resolved manner by highly accurate differential external quantum efficiency (EQE) measurements. We investigate three different types of PSCs fabricated by different research groups. The nonlinearity of all samples is found to be spectrally invariant, which significantly simplifies spectral mismatch corrections. We demonstrate that misinterpretation of EQE measurements can result in a more than 10% relative error in efficiency measurements, if solar simulators are adjusted to photocurrents determined from differential EQEs. For obtaining an accurate integrated photocurrent from EQEs, we introduce a new, convenient approach that accounts for cell nonlinearities but avoids the time-consuming full analysis of spectrally resolved nonlinearity. Moreover, for the samples investigated here, it is shown that the differential EQE measured at 0.35 suns bias irradiance represents a reasonably good estimate of the actual EQE at 1 sun. Furthermore, we determine spectrally resolved temperature coefficients (TCs) and show how the band gap blue shift varies with perovskite absorber and temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Solar cell efficiency tables (version 49)10.1002/pip.2855 ↗
2. NREL, NREL Efficiency Charts, available at 〈https://www.nrel.gov/pv/assets/images/efficiency-chart.png〉.
3. Best practices in perovskite solar cell efficiency measurements: avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
4. Precise performance characterization of perovskite solar cells10.1016/j.cap.2016.05.002 ↗
5. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
6. Characterization of perovskite solar cells: towards a reliable measurement protocol10.1063/1.4960759 ↗
7. Erroneous efficiency reports harm organic solar cell research10.1038/nphoton.2014.210 ↗
8. Hysteresis and transient behavior in current–voltage measurements of hybrid-perovskite absorber solar cells10.1039/C4EE02465F ↗
9. Origin of J–V hysteresis in perovskite solar cells10.1021/acs.jpclett.6b00215 ↗
10. Hysteresis phenomena in perovskite solar cells: the many and varied effects of ionic accumulation10.1039/C6CP06989D ↗
11. Light-activated photocurrent degradation and self-healing in perovskite solar cells10.1038/ncomms11574 ↗
12. Mundus · 2014 · 3439
13. Mundus · 2016
14. Device pre-conditioning and steady-state temperature dependence of CH3NH3PbI3 perovskite solar cells
15. Calibration of solar cells 1: the differential spectral responsivity method10.1364/AO.26.001701 ↗
16. Hohl-Ebinger · 2007 · 422
17. Mundus · 2015 · 514
18. Recombination-limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
19. High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer10.1002/aenm.201401855 ↗
20. Self-doped conducting polymer as a hole-extraction layer in organic-inorganic hybrid perovskite solar cells10.1002/admi.201500678 ↗
21. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
22. Temperature dependent energy levels of methylammonium lead iodide perovskite10.1063/1.4922804 ↗
23. Temperature-dependent charge-carrier dynamics in CH3NH3PbI3 perovskite thin films10.1002/adfm.201502340 ↗
24. Structural and optical properties of methylammonium lead iodide across the tetragonal to cubic phase transition: implications for perovskite solar cells10.1039/C5EE02925B ↗
25. Pinhole-free perovskite films for efficient solar modules10.1039/C5EE03703D ↗
26. Efficient near-infrared-transparent perovskite solar cells enabling direct comparison of 4-terminal and monolithic perovskite/silicon tandem cells10.1021/acsenergylett.6b00254 ↗
27. Lead acetate precursor based p-i-n perovskite solar cells with enhanced reproducibility and low hysteresis10.1039/C5TA03169A ↗