Antisolvent additive engineering containing green additive for efficient and stable perovskite solar cells
Source abstract
Abstract
The efficiency of the perovskite layer generally determines the performance of perovskite solar cells (PSCs). Perovskite solar cells (PSCs) depend highly on the layer`s morphology, crystalline structure, and surface defect of their power conversion efficiency (PCE), and long-term stability. Introducing appropriate solvent additives to the perovskite precursor solution effectively controls the film structure, defect passivation, and grain boundaries. In this work, alcohols such as isopropyl alcohol (IPA), ethanol, and methanol (a nontoxic, sustainable, and low-cost alcohol) are used as green solvent additives to enhance the quality and morphology of perovskite films and to control nonradiative recombination in the PSCs. The alcohol adducts containing OH groups have interacted with organic cations and Pb ions to produce PbO, which reduces the concentration of halide vacancies, enhances charge transfer, and decreases nonradiative recombination. Alcohol additives can produce homogeneous, highly crystalline perovskite films with improved charge transfer and reduced recombination. Using the best alcohol additive, IPA, provides power conversion efficiency (PCE) of 20.41% and greater ambient air stability, as it keeps more than 82% of its original PCE after 1000 h. Furthermore, IPA additive-based PSCs retain 81% and 80% of their original efficiencies after 500 and 350 h of continuous light irradiation and heating at 85 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
2. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
3. Electron-hole diffusion lengths> 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
4. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
5. NREL Best Research-Cell Efficiency Chart, ⟨https://www.nrel.gov/pv/cell-efficiency.html⟩ (accessed: august 2023). in.
6. Stable high‐performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
7. π‐Conjugated Lewis base: efficient trap‐passivation and charge‐extraction for hybrid perovskite solar cells10.1002/adma.201604545 ↗
8. Efficient defect passivation for perovskite solar cells by controlling the electron density distribution of donor-π-acceptor molecules
9. Fully doctor-bladed planar heterojunction perovskite solar cells under ambient condition10.1016/j.orgel.2018.04.020 ↗
10. Low‐temperature soft‐cover deposition of uniform large‐scale perovskite films for high‐performance solar cells10.1002/adma.201701440 ↗
11. Control of electrical potential distribution for high-performance perovskite solar cells10.1016/j.joule.2017.11.015 ↗
12. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
13. Unravelling the role of C60 derivatives as additives into active layers for achieving high-efficiency planar perovskite solar cells10.1016/j.carbon.2020.05.079 ↗
14. Global control of CH3NH3PbI3 formation with multifunctional ionic liquid for perovskite hybrid photovoltaics10.1021/acs.jpcc.8b01026 ↗
15. An efficient approach to fabricate air‐stable perovskite solar cells via addition of a self‐polymerizing ionic liquid10.1002/adma.202003801 ↗
16. Trap-state passivation by nonvolatile small molecules with carboxylic acid groups for efficient planar perovskite solar cells10.1021/acs.jpcc.9b02621 ↗
17. Tuning perovskite morphology by polymer additive for high efficiency solar cell10.1021/acsami.5b00052 ↗
18. Additive enhanced crystallization of solution‐processed perovskite for highly efficient planar‐heterojunction solar cells10.1002/adma.201400231 ↗
19. Efficiency improvement of planar perovskite solar cells using a phenol additive10.1039/C8TC04525A ↗
20. Boosting the performance of one-step solution-processed perovskite solar cells using a natural monoterpene alcohol as a green solvent additive10.1021/acsaelm.1c00084 ↗
21. Perovskite solar cells fabricated by using an environmental friendly aprotic polar additive of 1, 3-dimethyl-2-imidazolidinone10.1186/s11671-017-2391-3 ↗
22. Fabrication of high quality perovskite films by modulating the Pb–O bonds in Lewis acid–base adducts10.1039/C7TA00539C ↗
23. Additive‐enhanced crystallization of solution process for planar perovskite solar cells with efficiency exceeding 1910.1002/chem.201704181 ↗
24. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 1710.1021/jacs.5b06444 ↗
25. Reproducible fabrication of efficient perovskite-based solar cells: X-ray crystallographic studies on the formation of CH3NH3PbI3 layers10.1246/cl.140074 ↗
26. Highly efficient perovskite solar cells enabled by multiple ligand passivation10.1002/aenm.201903696 ↗
27. Perovskite films regulation via hydrogen-bonded polymer network for efficient and stable perovskite solar cells
28. Goethite quantum dots as multifunctional additives for highly efficient and stable perovskite solar cells10.1002/smll.201904372 ↗
29. More effective perovskite surface passivation strategy via optimized functional groups enables efficient p-i-n perovskite solar cells10.1016/j.apsusc.2022.154248 ↗
30. Multi-site passivation-based antisolvent additive engineering with gradient distribution for superior triple cation P-I-N perovskite solar cells10.1016/j.nanoen.2022.107193 ↗
31. Heat-and gas-induced transformation in CH3NH3PbI3 perovskites and its effect on the efficiency of solar cells10.1021/acs.chemmater.7b03243 ↗
32. Perovskite solution aging: what happened and how to inhibit?10.1016/j.chempr.2020.02.016 ↗
33. Stabilization of precursor solution and perovskite layer by addition of sulfur
34. Elimination of light-induced degradation at the nickel oxide-perovskite heterojunction by aprotic sulfonium layers towards long-term operationally stable inverted perovskite solar cells10.1039/D2EE01801B ↗
35. High‐performance perovskite solar cells with enhanced environmental stability based on a (p‐FC6H4C2H4NH3) 2 [PbI4] capping layer10.1002/aenm.201802595 ↗
36. Highly efficient and stable FASnI3 perovskite solar cells with effective interface modulation by PEABr treated low-dimensional perovskite layer10.1002/cssc.201902000 ↗
37. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells
38. Homogeneous grain boundary passivation in wide‐bandgap perovskite films enables fabrication of monolithic perovskite/organic tandem solar cells with over 21% efficiency10.1002/adfm.202112126 ↗
39. Infrared spectroscopic study of vibrational modes in methylammonium lead halide perovskites10.1021/acs.jpclett.5b01309 ↗
40. Formation dynamics of CH3NH3PbI3 perovskite following two-step layer deposition10.1021/acs.jpclett.5b02495 ↗
41. Functional additives for high-performance inverted planar perovskite solar cells with exceeding 20% efficiency: selective complexation of organic cations in precursors10.1016/j.nanoen.2020.104639 ↗
42. Interaction of organic cation with water molecule in perovskite MAPbI3: from dynamic orientational disorder to hydrogen bonding10.1021/acs.chemmater.6b02883 ↗
43. The effects of alkyl chain combinations on the structural and mechanical properties of biomimetic ion pair amphiphile bilayers10.3390/bioengineering4040084 ↗
44. Alkylated cage silsesquioxanes: a comprehensive study of thermal properties and self-assembled structure10.1039/C4RA04987J ↗
45. Intercalation of alcohols methanol, ethanol and isopropanol into fullerene C60 lattice10.1016/S0022-2860(98)00394-9 ↗
46. Efficient and stable perovskite solar cells enabled by dicarboxylic acid-supported perovskite crystallization10.1021/acs.jpclett.0c03566 ↗
47. NbF5: a novel α‐phase stabilizer for FA‐based perovskite solar cells with high efficiency10.1002/adfm.201807850 ↗
48. Multifunctional molecular modulators for perovskite solar cells with over 20% efficiency and high operational stability10.1038/s41467-018-06709-w ↗
49. Sealing the domain boundaries and defects passivation by Poly(acrylic acid) for scalable blading of efficient perovskite solar cells10.1016/j.jpowsour.2019.04.041 ↗
50. Identifying the charge generation dynamics in Cs+-based triple cation mixed perovskite solar cells10.1039/C7CP03760K ↗
51. Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites10.1038/s41586-020-2184-1 ↗
52. Efficient perovskite solar cells by reducing interface-mediated recombination: a bulky amine approach10.1002/aenm.202000197 ↗
53. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
54. Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells10.1038/s41467-019-12613-8 ↗
55. Enhanced performance of perovskite solar cells via reactive post-treatment process utilizing guanidine acetate as interface modifier10.1002/solr.202100547 ↗
56. Chemical bridge-mediated heterojunction electron transport layers enable efficient and stable perovskite solar cells10.1021/acsami.3c04852 ↗
57. Revivification of nickel oxide-perovskite interfaces via nickel nitrate to boost performance in perovskite solar cells10.1016/j.nanoen.2022.108062 ↗
58. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
59. Effects of heterofunctional alkali-metal formate doping on perovskite solar cell performance
60. Simultaneously passivating cation and anion defects in metal halide perovskite solar cells using a zwitterionic amino acid additive
61. A strategy to produce high efficiency, high stability perovskite solar cells using functionalized ionic liquid-dopants
62. Tailoring passivation molecular structures for extremely small open-circuit voltage loss in perovskite solar cells10.1021/jacs.8b13091 ↗
63. Hybrid interfacial ETL engineering using PCBM-SnS2 for High-Performance p-i-n structured planar perovskite solar cells10.1016/j.cej.2020.125504 ↗
64. From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells10.1016/j.joule.2018.04.010 ↗
65. Enhanced performance of p-i-n perovskite solar cell via defect passivation of nickel oxide/perovskite interface with self-assembled monolayer10.1016/j.apsusc.2021.149973 ↗
66. Opto-electro-modulated transient photovoltage and photocurrent system for investigation of charge transport and recombination in solar cells10.1063/1.4972104 ↗
67. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide10.1021/jacs.5b04930 ↗
68. Opto-electronic characterization of third-generation solar cells10.1080/14686996.2018.1442091 ↗
69. Charge transport and its characterization using photo‐CELIV in bulk heterojunction solar cells10.1002/pi.5274 ↗
70. Insights into charge carrier dynamics in organo-metal halide perovskites: from neat films to solar cells10.1039/C6CS00942E ↗
71. Efficient and stable planar perovskite solar cells with a PEDOT:PSS/SrGO hole interfacial layer10.1016/j.jallcom.2019.152091 ↗
72. Boron nitride-incorporated NiOx as a hole transport material for high-performance p-i-n planar perovskite solar cells10.1016/j.jpowsour.2020.228738 ↗
73. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗