journal article·2024-04Open access

The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices

Xiaolei Liu, Ali Abbas, Mustafa Togay, Vlad Kornienko, Rachael Greenhalgh, Kieran Curson, Jake Bowers, Kurt Barth, Michael Walls, Ebin Bastola, Griffin Barros-King, Adam B. Phillips, Michael J. Heben

Abstract

Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density. The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. CdTe-based thin film photovoltaics: recent advances, current challenges and future prospects10.1016/j.solmat.2023.112289 ↗
2. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
3. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
4. Effect of microstructure on the photoactivity of thin film CdSe
5. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
6. Selenium passivates grain boundaries in alloyed CdTe solar cells10.1016/j.solmat.2022.111595 ↗
7. Understanding the interplay between CdSe thickness and Cu doping temperature in CdSe/CdTe devices10.1109/JPHOTOV.2021.3110338 ↗
8. Transient metastable behavior caused by magnesium-doped zinc oxide emitters in CdSeTe/CdTe solar cells
9. Structural and compositional dependence of the CdTexSe1−x alloy layer photoactivity in CdTe-based solar cells
10. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
11. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
12. Tailoring SnO2, (Mg,Zn)O, and Ga:(Mg,Zn)O electro-optical properties and stability for solar cells
13. Infante-Ortega · 2023
14. Chlorine activated stacking fault removal mechanism in thin film CdTe solar cells: the missing piece10.1038/s41467-021-25063-y ↗
15. Synthesis and band gap tuning in CdSe (1-x) Te (x) thin films for solar cell applications10.1016/j.solener.2017.05.079 ↗
16. First-principles study of the band gap tuning and doping control in CdSexTe1−x alloy for high efficiency solar cell10.1088/1674-1056/28/8/086106 ↗
17. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
18. Recombination and bandgap engineering in CdSeTe/CdTe solar cells10.1063/1.5098459 ↗
19. Al-Jassim · 2020
20. Temperature dependent current–voltage and admittance spectroscopy on heat-light soaking effects of Cu(In,Ga)Se2 solar cells with ALD-Zn(O,S) and CBD-ZnS(O,OH) buffer layers10.1016/j.solmat.2015.06.044 ↗
21. Drive-level capacitance profiling of Cu(In,Ga)Se2 solar cells for different Cu/III ratios
22. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
23. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
24. Determination of the carrier concentration in CdSe crystals from the effective infrared absorption coefficient measured by means of the photothermal infrared radiometry10.1007/s00339-014-8860-y ↗
25. Insights into the role of the interface defects density and the bandgap of the back surface field for efficient p-type silicon heterojunction solar cells10.1039/C7RA04018K ↗
26. The effect of dopant material to optical properties: energy band gap Tin Oxide thin film10.1088/1742-6596/1816/1/012114 ↗