ZnPc/CsPbBr3 QDs collaborative interface modification to improve the performance of CsPbBr3 perovskite solar cells
Source abstract
Abstract
Carbon-based, all-inorganic CsPbBr 3 perovskite solar cells (PSCs) have attracted considerable interests because of their superior environmental stability, simple and low-cost fabrication process. However, the large energy barrier and high defect states at the CsPbBr 3/Carbon interface will cause poor carrier extraction and serious carrier recombination, which further degrade performance of final devices. In this work, we introduce zinc phthalocyanine (ZnPc), CsPbBr 3 quantum dots (QDs), and ZnPc mixed CsPbBr 3 QDs in proper proportion as the CsPbBr 3/carbon interface modification layers of CsPbBr 3 PSCs. It is found that the modification layers, especially the ZnPc mixed CsPbBr 3 QDs modification layer, can passivate trap states, improve interface contact and optimize energy level alignment at the CsPbBr 3/carbon interface, which can further enhance carrier extraction, suppress carrier recombination and improve performance of final devices. By virtue of ZnPc mixed CsPbBr 3 QDs modification, a highest efficiency of 10.20% and long-term stability over 6 months has been achieved.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. CsBr interface modification to improve the performance of perovskite solar cells prepared in ambient air10.1016/j.solmat.2019.110110 ↗
3. An overview on enhancing the stability of lead halide perovskite quantum dots and their applications in phosphor-converted LEDs10.1039/C8CS00740C ↗
4. Mixed cation FAxPEA1–xPbI3 with enhanced phase and ambient stability toward high-performance perovskite solar cells
5. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
6. 2021
7. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
8. Bidentate ligand modified CsPbI2Br quantum dots as an interface for high-performance carbon-based perovskite solar cells10.1016/j.mssp.2021.105847 ↗
9. Precise stress control of inorganic perovskite films for carbon-based solar cells with an ultrahigh voltage of 1.622 V10.1016/j.nanoen.2019.104286 ↗
10. Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes10.1002/aenm.201800504 ↗
11. Magnesium acetate additive enables efficient and stable carbon electrode based CsPbI2Br perovskite solar cells10.1016/j.solener.2021.04.053 ↗
12. Interface engineering of imidazolium ionic liquids toward efficient and stable CsPbBr3 perovskite solar cells10.1021/acsami.9b20831 ↗
13. Tailored lattice “tape” to confine tensile interface for 11.08%-efficiency all-inorganic CsPbBr3 perovskite solar cell with an ultrahigh voltage of 1.702 V10.1002/advs.202101418 ↗
14. Lanthanide ions doped CsPbBr3 halides for HTM-free 10.14%-efficiency inorganic perovskite solar cell with an ultrahigh open-circuit voltage of 1.594 V10.1002/aenm.201802346 ↗
15. High efficient hole extraction and stable all-bromide inorganic perovskite solar cells via derivative-phase gradient bandgap architecture10.1002/solr.201900030 ↗
16. All-inorganic CsPbBr3 perovskite solar cell with 10.26% efficiency by spectra engineering10.1039/C8TA08900K ↗
17. All-inorganic CsPbBr3 perovskite solar cells with 10.45% efficiency by evaporation-assisted deposition and setting intermediate energy levels10.1021/acsami.9b06356 ↗
18. Hole‐boosted Cu(Cr,M)O2 nanocrystals for all‐inorganic CsPbBr3 perovskite solar cells10.1002/ange.201910843 ↗
19. Alkyl-chain-regulated charge transfer in fluorescent inorganic CsPbBr3 perovskite solar cells10.1002/anie.202000199 ↗
20. Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells10.1016/j.nanoen.2019.104015 ↗
21. Poly(3-hexylthiophene)/zinc phthalocyanine composites for advanced interface engineering of 10.03%-efficiency CsPbBr3 perovskite solar cells10.1039/C9TA01151J ↗
22. Slow-photon-effect-Induced photoelectrical-conversion efficiency enhancement for carbon-quantum-dot-sensitized inorganic CsPbBr3 inverse opal perovskite solar cells10.1002/adma.201703682 ↗
23. Enhanced performance of CsPbBr3 perovskite solar cells by reducing the conduction band offsets via a Sr-modified TiO2 layer10.1016/j.apsusc.2020.147119 ↗
24. Cesium iodide interface modification for high efficiency, high stability and low hysteresis perovskite solar cells10.1016/j.electacta.2017.03.139 ↗
25. Enhanced efficiency of perovskite solar cells by PbS quantum dot modification10.1016/j.apsusc.2019.05.067 ↗
26. The evolution of quantum confinement in CsPbBr3 perovskite nanocrystals10.1021/acs.chemmater.7b00478 ↗
27. The interface modified by CsPbBr3 quantum dots for hole transport layer-free perovskite solar cell10.1016/j.cplett.2021.139153 ↗
28. Solution-processed amino acid modified SnO2 electron transport layer for carbon-based CsPbIBr2 perovskite solar cells10.1016/j.mssp.2021.105964 ↗
29. Halide perovskites for high-performance X-ray detector10.1016/j.mattod.2021.01.028 ↗
30. All-inorganic perovskite quantum dots as light-harvesting, interfacial, and light-converting layers toward solar cells10.1039/D1TA02786G ↗
31. Room-temperature synthesis of excellent-performance CsPb1-xSnxBr3 perovskite quantum dots and application in light emitting diodes10.1016/j.matdes.2019.108246 ↗
32. Fabrication of efficient organic-inorganic perovskite solar cells in ambient air10.1186/s11671-018-2714-z ↗
33. High-purity inorganic perovskite films for solar cells with 9.72 % efficiency10.1002/anie.201800019 ↗
34. Improving photovoltaic performance of carbon-based CsPbBr3 perovskite solar cells by interfacial engineering using P3HT interlayer10.1016/j.jpowsour.2019.05.075 ↗
35. Interface engineering of imidazolium ionic liquids toward efficient and stable CsPbBr3 perovskite solar cells10.1021/acsami.9b20831 ↗
36. Charge collection and pore filling in solid-state dye-sensitized solar cells10.1088/0957-4484/19/42/424003 ↗
37. E-beam evaporated Nb2O5 as an effective electron transport layer for large flexible perovskite solar cells10.1016/j.nanoen.2017.04.010 ↗
38. Solution processable inorganic–organic double-layered hole transport layer for highly stable planar perovskite solar cells10.1002/aenm.201801386 ↗
39. Dual interfacial modification to improve the performance of CsPbBr3 perovskite solar cells10.1016/j.mssp.2022.106450 ↗
40. High-performance CsPbIxBr3-x all-inorganic perovskite solar cells with efficiency over 18% via spontaneous interfacial manipulation10.1002/adfm.202000457 ↗
41. Effective carrier transport tuning of CuOx quantum dots hole interfacial layer for high-performance inverted perovskite solar cell10.1016/j.apsusc.2021.149117 ↗
42. Fill factor in organic solar cells10.1039/c3cp51383a ↗
43. Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells10.1039/C7EE01675A ↗
44. Efficient PbS quantum dot solar cells employing a conventional structure10.1039/C7TA07014D ↗
45. Carbon-electrode-tailored all-inorganic perovskite solar cells to harvest solar and water-vapor energy10.1002/ange.201801837 ↗
46. Why lead methylammonium tri-iodide perovskite-based solar cells require a mesoporous electron transporting scaffold (but not necessarily a hole conductor)10.1021/nl404454h ↗
47. Enhanced performance of carbon-based planar CsPbBr3 perovskite solar cells with room-temperature sputtered Nb2O5 electron transport layer10.1016/j.solener.2019.08.069 ↗
48. Enhanced performance of CsPbBr3 perovskite solar cells by reducing the conduction band offsets via a Sr-modified TiO2 layer10.1016/j.apsusc.2020.147119 ↗
49. High crystallization of a multiple cation perovskite absorber for low-temperature stable ZnO solar cells with high-efficiency of over 2010.1039/C8NR00152A ↗
50. Alloy-controlled work function for enhanced charge extraction in all-inorganic CsPbBr3 perovskite solar cells10.1002/cssc.201800060 ↗