journal article·2021-01

Heat mitigation in perovskite solar cells: The role of grain boundaries

Hooman Mehdizadeh-Rad, Farhad Mehdizadeh-Rad, Furong Zhu, Jai Singh

Publisher page

Abstract

Abstract We have simulated a perovskite solar cell by developing a comprehensive mathematical model which incorporates drift-diffusion and heat transfer equations. This model incorporates all the heat transfer mechanisms, including the thermal power generation due to the tail state recombination and thermalization of charge carriers. Our model is validated by calculating the current-voltage characteristics of a PSC of the structure of Glass/PEDOT: PSS/CH3NH3PbI3/PC60BM/Al and finding it in very good agreement with the experimental results. The influence of grain boundary diameter on the operating temperature of the PSC is investigated in detail. It is found that by increasing the diameter of the grain boundaries, the operating temperature of the PSC decreases at higher voltages and the open circuit voltage increases slightly. The thermal power generated by the thermalization is found to play the dominant role in the operating temperature followed by the thermal power generated at the grain boundaries due to the highest tail state recombination in the region. This study is expected to provide a deeper understanding about different factors that influence the operating temperature of perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. High open-circuit voltage in perovskite solar cells: the role of hole transport layer10.1016/j.orgel.2018.09.006 ↗
3. Organic and perovskite solar cells: working principles, materials and interfaces10.1016/j.jcis.2016.11.021 ↗
4. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
5. Light harvesting and charge recombination in CH3NH3PbI3 perovskite solar cells studied by hole transport layer thickness variation10.1021/acsnano.5b00447 ↗
6. Trap‐assisted non‐radiative recombination in organic–inorganic perovskite solar cells10.1002/adma.201405372 ↗
7. Influence of urbach energy, temperature, and longitudinal position in the active layer on carrier diffusion length in perovskite solar cells10.1002/cphc.201801038 ↗
8. Influence of interfacial traps on the operating temperature of perovskite solar cells10.3390/ma12172727 ↗
9. The role of grain boundaries in perovskite solar cells10.1002/aenm.201901489 ↗
10. Electron-hole diffusion lengths >175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
11. Trap states in lead iodide perovskites10.1021/ja512833n ↗
12. Reduced surface defects of organometallic perovskite by thermal annealing for highly efficient perovskite solar cells10.1039/C5RA16669A ↗
13. Impact of excess CH3NH3I on free carrier dynamics in high-performance nonstoichiometric perovskites10.1021/acs.jpcc.6b11984 ↗
14. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
15. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
16. Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field10.1039/C4EE03664F ↗
17. Hysteresis analysis based on the ferroelectric effect in hybrid perovskite solar cells10.1021/jz502111u ↗
18. Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell10.1038/ncomms6001 ↗
19. Frontiers, opportunities, and challenges in perovskite solar cells: a critical review10.1016/j.jphotochemrev.2017.11.002 ↗
20. Abnormal crystal growth in CH3NH3PbI3−xClx using a multi-cycle solution coating process10.1039/C5EE01179E ↗
21. Modulating crystal grain size and optoelectronic properties of perovskite films for solar cells by reaction temperature10.1039/C5NR08935B ↗
22. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
23. Numerical simulation and experimental validation of inverted planar perovskite solar cells based on NiOx hole transport layer10.1016/j.spmi.2017.09.048 ↗
24. Recent progress in modeling, simulation, and optimization of polymer solar cells10.1109/JPHOTOV.2012.2193385 ↗
25. Simulation of perovskite solar cell temperature under reverse and forward bias conditions10.1063/1.5118261 ↗
26. Energy and exergy study of unglazed transpired collector-2 stage10.1016/j.solener.2016.03.045 ↗
27. Incropera · 2007 · vol. 5
28. McAdams · 1954 · 165
29. Combined influence of Urbach's tail width energy and mobility of charge carriers on the photovoltaic performance of bulk heterojunction organic solar cells10.1007/s10854-019-00868-2 ↗
30. Recombination via tail states in polythiophene:fullerene solar cells10.1103/PhysRevB.83.115209 ↗
31. Profiling exciton generation and recombination in conventional and inverted bulk heterojunction organic solar cells
32. Modulation of light absorption by optical spacer in perovskite solar cells10.1002/pssr.201600037 ↗
33. Solar cells. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
34. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗