Influence of ZnO sol–gel electron transport layer processing on BHJ active layer morphology and OPV performance
Source abstract
Abstract
Abstract We report that thermal annealing of P3HT:PCBM bulk heterojunctons (BHJs) on top of a commonly used sol–gel ZnO electron transport layer can lead to the formation of PCBM clusters, which significantly decreased short circuit current density (up to 45%), open circuit voltage (up to 35%), and fill factor (up to 15%). To understand the cause of this phenomenon, we deposited ZnO films using different sol–gel recipes and systematically studied the correlation between sol–gel ZnO processing and the morphology of the P3HT:PCBM BHJ. We showed that higher amounts of monoethanolamine (MEA), a stabilizer in the ZnO sol–gel precursor, lead to higher densities of PCBM clusters in the BHJ. In addition, we correlated the cluster area fraction with bimolecular recombination at 100 mW/cm 2 , as quantified by white-light biased external quantum efficiency measurements. Finally, we show that rinsing off residual organics from the ZnO surface after pyrolysis eliminated PCBM cluster formation, avoiding poor organic photovoltaic device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Studies on semiconducting thin films prepared by the spray pyrolysis technique for photoelectrochemical solar cell applications: preparation and properties of ZnO10.1016/0165-1633(86)90069-9 ↗
2. Oriented ZnO thin films synthesis by sol–gel process for laser application10.1016/S0040-6090(02)01219-1 ↗
3. ZnO nanoparticulate thin film: preparation, characterization and gas-sensing property10.1016/j.snb.2004.04.080 ↗
4. Zinc oxide films prepared by sol–gel method10.1016/j.jcrysgro.2004.11.098 ↗
5. Preparation of transparent, electrically conducting ZnO film from zinc acetate and alkoxide10.1007/BF00355977 ↗
6. Sol–gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution10.1016/S0040-6090(97)00231-9 ↗
7. Application of solution-processed metal oxide layers as charge transport layers for CdSe/ZnS quantum-dot LEDs10.1088/0957-4484/24/11/115201 ↗
8. A ZnO/N-doped carbon nanotube nanocomposite charge transport layer for high performance optoelectronics10.1039/c2jm30710c ↗
9. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
10. Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy10.1021/am900446x ↗
11. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
12. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
13. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
14. Aesthetically pleasing conjugated polymer:fullerene blends for blue–green solar cells via roll-to-roll processing10.1021/am300156p ↗
15. Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2TiO2): performance improvement during long-time irradiation10.1016/j.solmat.2006.02.007 ↗
16. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
17. Fast inline roll‐to‐roll printing for indium–tin‐oxide‐free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
18. Solution processed ZnO hybrid nanocomposite with tailored work function for improved electron transport layer in organic photovoltaic devices10.1021/am402511t ↗
19. High performance organic photovoltaic cells using polymer‐hybridized ZnO nanocrystals as a cathode interlayer10.1002/aenm.201100154 ↗
20. Modifying hydrogen bonding interaction in solvent and dispersion of ZnO nanoparticles: impact on the photovoltaic performance of inverted organic solar cells
21. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
22. Three-dimensional nanoscale organization of polymer solar cells10.1039/b900901a ↗
23. Effect of annealing on P3HT:PCBM charge transfer and nanoscale morphology probed by ultrafast spectroscopy10.1021/nl9038289 ↗
24. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
25. A quantitative study of the formation of PCBM clusters upon thermal annealing of P3HT/PCBM bulk heterojunction solar cell10.1016/j.solmat.2013.05.011 ↗
26. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene–fullerene bulk heterojunction10.1002/adfm.200400559 ↗
27. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3D morphology on device performance10.1002/adfm.200902247 ↗
28. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗
29. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
30. A quantitative study of PCBM diffusion during annealing of P3HT: PCBM blend films10.1021/ma901444u ↗
31. Performance enhancement of fullerene-based solar cells by light processing10.1038/ncomms3227 ↗
32. Intensity and wavelength dependence of bimolecular recombination in P3HT:PCBM solar cells: a white-light biased external quantum efficiency study10.1063/1.4801920 ↗
33. Open-circuit voltage improvement in hybrid ZnO-polymer photovoltaic devices with oxide engineering10.1109/JSTQE.2010.2040586 ↗
34. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
35. A simple miniature controlled-atmosphere chamber for optoelectronic characterizations10.1016/j.solmat.2010.03.017 ↗
36. Sol–gel synthesis of ZnO thin films10.1016/S0040-6090(96)08864-5 ↗
37. Study of structural and electrical properties of grain-boundary modified ZnO films prepared by sol–gel technique10.1016/S0254-0584(01)00402-3 ↗
38. Crystallization behavior and origin of c-axis orientation in sol–gel-derived ZnO: Li thin films on glass substrates10.1016/S0169-4332(01)00367-1 ↗
39. Bach · 1997