journal article·2012-04

Overcoming over-plating problems for PECVD SiNx passivated laser doped p-type multi-crystalline silicon solar cells

Stanley Wang, Alison Lennon, Budi Tjahjono, Ly Mai, Bernhard Vogl, Stuart Wenham

Publisher page

Abstract

Abstract Effective self-aligned metallisation schemes, such as the electroless and light induced plating techniques have been well-characterised and used in photovoltaic devices for many decades. However, application of these plating techniques to standard acid-textured, phosphorus-diffused, p-type multi-crystalline silicon (Si) wafers with a plasma enhanced chemical vapour deposition (PECVD) silicon nitride (SiN x ) coated surface can be problematic due to over-plating. In this paper, we identify the two main causes of over-plating on these wafers: the physical properties of the deposited SiN x layer and the topology of the acid-textured multi-crystalline wafer surfaces. It is shown that the implementation of an innovative acid rounding or alkali etch process prior to the PECVD process can eliminate over-plating problems and, thus, improve the performance of the final cell devices resulting in an average efficiency of 16.8% and an average fill factor (FF) of 78% for laser-doped selective emitter cells fabricated on commercial grade wafers with nominal resistivity of 1 Ω cm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. I.A. Lesk, R. Pryor, Method of Semiconductor Solar Energy Device Fabrication, Patent No. 4557037, United States, 1978.
2. S.R. Wenham, M.A. Green, Self Aligning Method for Forming a Selective Emitter and Metallization in a Solar Cell, Patent No 6429037, United States, 2002.
3. Metallization improvement on fabrication of interdigitated backside and double sided buried contact solar cells10.1016/j.solmat.2004.09.001 ↗
4. Buried contact silicon solar cells10.1002/pip.4670010102 ↗
5. B.S. Tjahjono, J.H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S.R. Wenham, High efficiency solar cell structures through the use of laser doping, 22nd European Photovoltaic Solar Energy Conference, 2007.
6. A. Lennon, R. Utama, A. Ho-Baillie, S. Wenham, Inkjet method for direct patterned etching of silicon dioxide, Proceedings of the Digital Fabrication Conference, Pittsburgh, USA, 2008, pp. 251–25410.1109/COMMAD.2008.4802119 ↗
7. R. Utama, Inkjet printing for commercial high-efficiency solar cells, Ph.D. Thesis, Center of Excellence for Advanced Silicon Photovoltaics and Photonics, University of New South Wales, Sydney, Australia, 2009.
8. A. Karpour, B. Tjahjono, S. Wenham, Advanced electroless plating of high efficiency solar cells with injet printed and/or laser doped grooves, 24th European Photovoltaic Solar Energy Conference, Hamburg, 2009.
9. Goldstein · 1981
10. K.R. McIntosh, Humps, lumps and bumps: three detrimental effects in the current-voltage curve of silicon solar cells, Ph.D. Thesis, Center of Excellence for Advanced Silicon Photovoltaics and Photonics, University of New South Wales, Sydney, Australia, 2001.
11. B. Tjahjono, S. Wang, A. Sugianto, L. Mai, Z. Hameiri, N. Borojevic, A. Ho-Baillei, S. Wenham, Application of laser doped contact structure on multicrystalline solar cells, in: Proceedings 23rd European Photovoltaic Solar Energy Conference, 2008.
12. S. Wang, T. Puzzer, B. Vogl, B. Tjahjono, B. Hallam, M. Eadie, N. Borojevic, Z. Hameiri, S. Wenham, Overcoming overplating problems on acid textured multicrystalline wafers with silicon nitride coated surfaces, 24th European Photovoltaic Solar Energy Conference, Hamburg, 2009.
13. Fabrication method for low stress PECVD–SiNx layers10.1088/1742-6596/34/1/126 ↗
14. 16.7% Efficient, laser textured, buried contact polycrystalline silicon solar cell10.1063/1.102019 ↗
15. A. Sugianto, B.S. Tjahjono, J.H. Guo, S.R. Wenham, Impact of laser induced defects on the performance of solar cells using localised laser doped regions beneath the metal contacts, 22nd European Photovoltaic Solar Energy Conference and Exhibition, Milan, Italy, September 2007.