journal article·2021-08

Defect passivation in Cu2ZnSnSe4 thin-film solar cells by novel sodium doping

Muhammad Rehan, Ara Cho, Awet Mana Amare, Kihwan Kim, Jae Ho Yun, Jun-Sik Cho, Joo Hyung Park, Jihye Gwak, Donghyeop Shin

Publisher page

Abstract

Abstract Sodium (Na) alkali doping is one of the effective ways to improve Cu2ZnSnSe4 (CZTSe) device performance by passivating detrimental native defects caused by off-stoichiometric composition and Cu–Zn cationic disordering. Various methods to incorporate Na in CZTSe films have been considered to realize the ideal distribution of Na in CZTSe films. Na content, regardless of Na incorporation method, is significantly increased in bulk CZTSe. Interestingly, when a NaF precursor is supplied after CZTSe film growth, the surface Na content is slightly increased, resulting in improved device performance. For the first time, a sodium bifacial treatment was employed to obtain an optimal profile of Na in CZTSe films. Using this novel route for Na doping, the photovoltaic (PV) device exhibited a maximum efficiency of 6.02%, which was higher than that compared to CZTSe devices with single Na doping and CZTSe device with Na diffused from soda-lime glass. According to defect analyses, the improved device performance is associated with a reduction in the defect density from 1.1 × 1016 (without Na doing) to 5.7 × 1014 cm−3 (with optimal Na profile). These results indicate that the proposed bifacial treatment method is a desirable means to fabricate high-efficiency, flexible CZTSe solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Over 10% efficient pure CZTSe solar cell fabricated by electrodeposition with Ge doping10.1002/solr.202000059 ↗
2. Progress towards marketable earth-abundant chalcogenide solar cells10.1016/j.tsf.2010.12.225 ↗
3. CZTSe thin film growth via a co-evaporation process using a ZnSe effusion source10.1007/s13391-012-2033-y ↗
4. Yun · 2007
5. Solution-processed highly efficient Cu2ZnSnSe4 thin film solar cells by dissolution of elemental Cu, Zn, Sn, and Se powders10.1021/am5064926 ↗
6. Hydrazine-processed Ge-substituted CZTSe solar cells10.1021/cm302881g ↗
7. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
8. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
9. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
10. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
11. Reduced defect density at the CZTSSe/CdS interface by atomic layer deposition of Al2O310.1063/1.4948947 ↗
12. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
13. Formation of the front-gradient bandgap in the Ag doped CZTSe thin films and solar cells10.1016/j.jechem.2019.03.026 ↗
14. Effect of Ag incorporation on structure and optoelectronic properties of (Ag1− xCux)2ZnSnSe4 solid solutions
15. First-principles study on Cd doping in Cu2ZnSnS4 and Cu2ZnSnSe4, Japanese10.1143/JJAP.51.10NC11 ↗
16. Cation substitution in earth‐abundant kesterite photovoltaic materials10.1002/advs.201870021 ↗
17. Effect of alkali metal atom doping on the CuInSe2-based solar cell absorber10.1021/acs.jpcc.7b03083 ↗
18. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
19. Alkali doping strategies for flexible and light-weight Cu2ZnSnSe4 solar cells10.1039/C5TA09640E ↗
20. Alkali-induced grain boundary reconstruction on Cu(In,Ga)Se2 thin film solar cells using cesium fluoride post deposition treatment
21. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
22. Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells, Appl
23. Intrinsic defects and Na doping in Cu2ZnSnS4: a density-functional theory study10.1016/j.solener.2015.04.005 ↗
24. Sodium-assisted passivation of grain boundaries and defects in Cu2ZnSnSe4 thin films10.1039/C9CP06537G ↗
25. Doping of Cu2ZnSnSe4 solar cells with Na+ or K+ alkali ions10.1039/C7TA05415G ↗
26. Investigations of potassium-induced surface treatment of Cu(In,Ga)Se2 (CIGSe) thin film solar cells prepared by two-stage process using elemental selenium
27. The effect of Na in polycrystalline and epitaxial single-crystal CuIn1−xGaxSe210.1016/j.tsf.2004.11.038 ↗
28. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
29. Advanced alkali treatments for high‐efficiency Cu(in,Ga)Se2 solar cells on flexible substrates10.1002/aenm.201900408 ↗
30. Cu2ZnSnSe4 thin‐film solar cells by thermal co‐evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
31. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
32. Cu2ZnSnSe4 solar cells onto polyimide substrates fabricated at low temperature
33. Post-deposition treatment of Cu2ZnSnSe4 with alkalis10.1016/j.tsf.2016.11.021 ↗
34. The effects of Na on the growth of Cu2ZnSnSe4 thin films using low-temperature evaporation process10.1007/s11801-019-8130-5 ↗
35. Improvement of minority carrier lifetime and conversion efficiency by Na incorporation in Cu2ZnSnSe4 solar cells10.1063/1.4993288 ↗
36. Fabrication and characterization of Cu2ZnSnSe4 thin-film solar cells using a single-stage Co-evaporation method: effects of film growth temperatures on device performances10.3390/en13061316 ↗
37. Bulk and metastable defects in CuIn1− xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
38. Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films10.1039/C3EE44130J ↗
39. Similarities and critical differences in heavy alkali-metal rubidium and cesium effects on chalcopyrite Cu(in,Ga)Se2 thin-film solar cells10.1021/acs.jpcc.9b06042 ↗
40. Effects of sodium and potassium on the photovoltaic performance of CIGS solar cells10.1109/JPHOTOV.2016.2621343 ↗
41. Effect of sodium diffusion on the properties of CIGS solar absorbers prepared using elemental Se in a two-step process
42. Influence of sodium-containing substrates on Kesterite CZTSSe thin films based solar cells10.1557/opl.2013.1000 ↗
43. Highly efficient solution-processed CZTSSe solar cells based on a convenient sodium-incorporated post-treatment method10.1016/j.jechem.2019.03.029 ↗
44. Influence of alkali metals (Na, Li, Rb) on the performance of electrostatic spray-assisted vapor deposited Cu2ZnSn(S,Se)4 solar cells10.1038/srep22109 ↗
45. Features of KF and NaF postdeposition treatments of Cu(In,Ga)Se2 absorbers for high efficiency thin film solar cells10.1021/acs.chemmater.5b02335 ↗
46. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
47. Device postannealing enabling over 12% efficient solution‐processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
48. Effects of Na and MoS2 on Cu2ZnSnS4 thin-film solar cell10.1002/pip.2500 ↗
49. An investigation of Na-related defects in Cu2ZnSnSe410.1039/C7CP02192E ↗
50. Effect of Na doping on the performance and the band alignment of CZTS/CdS thin film solar cell10.1016/j.solener.2020.02.088 ↗
51. Proposition and computational analysis of a kesterite/kesterite tandem solar cell with enhanced efficiency10.1039/C6RA25704F ↗
52. Perovskite-kesterite monolithic tandem solar cells with high open-circuit voltage10.1063/1.4899275 ↗