journal article·2021-06Open access

Understanding VOC and performance deficit in wide bandgap perovskite photovoltaic devices

Ramez Hosseinian Ahangharnejhad, Jared D. Friedl, Adam B. Phillips, Michael J. Heben

Abstract

Abstract Wide bandgap metal halide perovskites materials are of interest for application as top subcells in multijunction devices. In contrast to smaller gap perovskite devices that perform fairly close to their internal Shockley-Queisser limit, wide gap versions show substantial deficits. To understand the origin of the limitations in more detail we simulated the performance of wide bandgap devices as a function of the energy band offsets at the contacts. Our results show that traditionally-used charge transport layers such as spiro-OMeTAD and TiO2 limit the performance of wide bandgap absorbers through a subtle interplay between effects on VOC and FF. We investigate the optimal characteristics for the charge transport layers as function of absorber bandgap and identify the needed band offsets at the p- and n-interfaces. Our results call for more research on charge transport layers to minimize the VOC and performance deficit in wide bandgap devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Perovskite solar cells on the way to their radiative efficiency limit – insights into a success story of high open-circuit voltage and low recombination10.1002/aenm.201602358 ↗
2. Identifying defect-tolerant semiconductors with high minority-carrier lifetimes: beyond hybrid lead halide perovskites10.1557/mrc.2015.26 ↗
3. Materials processing routes to trap-free halide perovskites10.1021/nl502612m ↗
4. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
5. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
6. Photovoltaic solar cell technologies: analysing the state of the art10.1038/s41578-019-0097-0 ↗
7. Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells10.1126/science.aav7911 ↗
8. High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells10.1126/science.aat5055 ↗
9. Optical design of perovskite solar cells for applications in monolithic tandem configuration with CuInSe2 bottom cells10.1557/adv.2018.464 ↗
10. Monolithic two-terminal all-perovskite tandem solar cells with power conversion efficiency exceeding 21%
11. Irradiance and temperature considerations in the design and deployment of high annual energy yield perovskite/CIGS tandems10.1039/C9SE00237E ↗
12. The potential of multijunction perovskite solar cells10.1021/acsenergylett.7b00647 ↗
13. High efficiency perovskite-silicon tandem solar cells: effect of surface coating versus bulk incorporation of 2D perovskite10.1002/aenm.202002139 ↗
14. Bimolecular additives improve wide-band-gap perovskites for efficient tandem solar cells with CIGS10.1016/j.joule.2019.04.012 ↗
15. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink10.1038/s41560-019-0466-3 ↗
16. Environmental impact per energy yield for bifacial single junction perovskite solar cells outperform the crystalline silicon solar cells10.1016/j.xcrp.2020.100216 ↗
17. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
18. Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D perovskite heterostructure10.1002/aenm.201803699 ↗
19. Light-Induced phase segregation in halide-perovskite absorbers10.1021/acsenergylett.6b00495 ↗
20. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
21. Halide segregation versus interfacial recombination in bromide-rich wide-gap perovskite solar cells10.1021/acsenergylett.0c01104 ↗
22. Numerical simulation of planar heterojunction perovskite solar cells based on SnO2 electron transport layer10.1021/acsaem.9b00755 ↗
23. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
24. Materials requirements for improving the electron transport layer/perovskite interface of perovskite solar cells determined via numerical modeling10.1557/adv.2020.319 ↗
25. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
26. Controllable design of solid-state perovskite solar cells by SCAPS device simulation10.1016/j.sse.2016.09.012 ↗
27. On the relation between the open-circuit voltage and quasi-fermi level splitting in efficient perovskite solar cells10.1002/aenm.201901631 ↗
28. The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells10.1039/C9EE02020A ↗
29. Experimental and SCAPS simulated formamidinium perovskite solar cells: a comparison of device performance10.1016/j.solener.2020.05.041 ↗
30. Iodide management in formamidinium-lead-halide – based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
31. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
32. Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells10.1039/C6EE00030D ↗
33. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
34. Amide‐catalyzed phase‐selective crystallization reduces defect density in wide‐bandgap perovskites10.1002/adma.201706275 ↗
35. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
36. Benzylamine‐treated wide‐bandgap perovskite with high thermal‐photostability and photovoltaic performance10.1002/aenm.201701048 ↗
37. Selective growth of layered perovskites for stable and efficient photovoltaics10.1039/C7EE03513F ↗