journal article·2020-05

Thioacetamide additive assisted crystallization of solution-processed perovskite films for high performance planar heterojunction solar cells

Can Cui, Danyan Xie, Ping Lin, Haihua Hu, Siyuan Che, Ke Xiao, Peng Wang, Lingbo Xu, Deren Yang, Xuegong Yu

Publisher page

Abstract

Abstract High-quality perovskite films with uniform coverage and large grains are indispensable to enhance the performance of perovskite solar cells with high efficiency and stability. However, solution-processed perovskite films usually possess small grains associated with abundant grain boundaries, which induce high trap state density and then seriously degrade the device performance. In this paper, the volatile Lewis base, thioacetamide (TAA), is employed as an additive to fabricate high-quality methylammonium lead iodide (MAPbI3) films. The average grain size of perovskite films increases continuously with increasing TAA content and reaches a maximum value of 960 nm in the sample with 1.0% TAA. However, the average gain size drops dramatically to the value of samples without TAA when TAA content increases to 2.0%, and then the average gain size keeps nearly unchanged upon further increasing TAA content up to 10%. This unusual grain size variation tendency is attributed to the volatility of additive, and a mechanism is proposed based on various characterizations to illustrate how volatile TAA improves perovskite film crystallization. Furthermore, the device based on the MAPbI3 film with 1.0% TAA shows a superior PCE of 18.9% and improved stability that the device with 1.0% TAA retains 88.9% of its initial performance after aging 816 h in the air with 25–35% relative humidity. The results strongly suggest that the TAA-modified MAPbI3 films as absorber layers can significantly enhance the performance of the perovskite solar cell due to large grains, high crystallization and reduced trap state density of the high quality TAA-modified MAPbI3 films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells10.1039/C6EE00030D ↗
2. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites10.1038/nphys3357 ↗
3. Determination of the exciton binding energy and effective masses for methylammonium and formamidinium lead tri-halide perovskite semiconductors10.1039/C5EE03435C ↗
4. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
5. Extended carrier lifetimes and diffusion in hybrid perovskites revealed by Hall effect and photoconductivity measurements10.1038/ncomms12253 ↗
6. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
7. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
8. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
9. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
10. Iodide management in formamidinium lead halide based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
11. Tuning molecular interactions for highly reproducible and efficient formamidinium perovskite solar cells via adduct approach10.1021/jacs.8b01037 ↗
12. Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells10.1039/C7EE01675A ↗
13. Impact of microstructure on local carrier lifetime in perovskite solar cells10.1126/science.aaa5333 ↗
14. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
15. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
16. Large perovskite grain growth in low-temperature solution-processed planar p-i-n solar cells by sodium addition10.1021/acsami.5b11494 ↗
17. Alkali metal doping for improved CH3NH3PbI3 perovskite solar cells10.1002/advs.201700131 ↗
18. Magnesium-doped MAPbI3 perovskite layers for enhanced photovoltaic performance in humid air atmosphere10.1021/acsami.8b06619 ↗
19. Efficient perovskite solar cells fabricated by Co partially substituted hybrid perovskite10.1002/aenm.201703178 ↗
20. Lewis acid-base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
21. A bifunctional Lewis base additive for microscopic homogeneity in perovskite solar cells10.1016/j.chempr.2017.05.020 ↗
22. Promoting perovskite crystal growth to achieve highly efficient and stable solar cells by introducing acetamide as an additive10.1039/C8TA02121J ↗
23. Incorporating 4-tert-Butylpyridine in an antisolvent: a facile approach to obtain highly efficient and stable perovskite solar cells10.1021/acsami.7b16912 ↗
24. Improvement of perovskite film quality for efficient solar cells via multiple chloride salt additives10.1016/j.scib.2018.05.003 ↗
25. Controlled growth of textured perovskite films towards high performance solar cells10.1016/j.nanoen.2016.06.041 ↗
26. Synergistic effect of anions and cations in additives for highly efficient and stable perovskite solar cells10.1039/C8TA00308D ↗
27. Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes10.1039/C7EE02272G ↗
28. Solvent-antisolvent ambient processed large grain size perovskite thin films for high-performance solar cells10.1038/s41598-018-31184-0 ↗
29. Enhanced crystallization by methanol additive in antisolvent for achieving high-quality MAPbI3 perovskite films in humid atmosphere10.1002/cssc.201800625 ↗
30. Hybrid PbS quantum-dot-in-perovskite for high-efficiency perovskite solar cell10.1002/smll.201801016 ↗
31. Antisolvent diethyl ether as additive to enhance the performance of perovskite solar cells10.1016/j.tsf.2018.07.041 ↗
32. Introduction of graphene nanofibers into the perovskite layer of perovskite solar cells10.1002/cssc.201800758 ↗
33. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
34. The additive coordination effect on hybrids perovskite crystallization and high-performance solar cell10.1002/adma.201603021 ↗
35. High electrical conductivity 2D MXene serves as additive of perovskite for efficient solar cells10.1002/smll.201802738 ↗
36. A two-stage annealing strategy for crystallization control of CH3NH3PbI3 films toward highly reproducible perovskite solar cells
37. Supersaturation controlled growth of MAFAPbI3 perovskite film for high efficiency solar cells10.1007/s11426-018-9250-6 ↗
38. Fabrication of perovskite films with large columnar grains via solvent-mediated Ostwald ripening for efficient inverted perovskite solar cells10.1021/acsaem.7b00300 ↗
39. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
40. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗