journal article·2017-03Open access

Improved environmental stability of highly conductive nominally undoped ZnO layers suitable for n-type windows in thin film solar cells

M. Hála, H. Kato, M. Algasinger, Y. Inoue, G. Rey, F. Werner, Ch. Schubbert, T. Dalibor, S. Siebentritt

Abstract

Abstract Highly conductive nominally undoped ZnO (b-ZnO), obtained by means of an additional plasma near the substrate during sputter deposition, represent an attractive alternative for ZnO:Al (AZO) commonly employed in transparent windows of thin film solar cells. b-ZnO layers exhibit more than twice higher charge carrier mobility in comparison to AZO layers of the same resistivity ( 1 · 10 − 3 Ω cm ). In consequence, a better transparency in near infrared region and an enhanced short circuit current can be achieved for low band gap thin film solar cells. Replacement of AZO for b-ZnO thus enhances their energy output. In order to allow assessment of suitability of these b-ZnO films for deployment in photovoltaic industry, we examine their stability in various environments, and show pathways to improve it. We demonstrate that the b-ZnO films can exhibit comparable stability to ZnO:Al films in both ambient and heated air over the period of 24 months. However, the examined b-ZnO films degrade faster in accelerated open damp heat (DH) conditions, which we attribute to the lower compactness of columnar microstructure. In order to circumvent this limitation, we introduce a novel multilayered b-ZnO film with an improved environmental stability, as verified by the enhanced optoelectrical performance of DH-treated Cu(InGa)(SSe)2 solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M. de Wild-Scholten, V. Cassagne, T. Huld, Solar resources and carbon footprint of photovoltaic power in different regions in Europe, in: Proc. 29th Eur. Photovoltaic Sol. Energy Conf. (Amsterdam, Netherlands), 2014, p. 3421.
2. Electrical properties
3. Transparent conducting oxides for photovoltaics
4. Substrate biased RF sputtering of zinc oxide films10.1016/0378-5963(82)90077-0 ↗
5. Electrical and optical properties of zinc oxide thin films prepared by rf magnetron sputtering for transparent electrode applications10.1063/1.333196 ↗
6. Highly conductive ZnO films with high near infrared transparency10.1002/pip.2601 ↗
7. Transparent conducting zinc oxide and indium-tin oxide films prepared by modified reactive planar magnetron sputtering10.1116/1.572024 ↗
8. F.J. Pern, R. Noufi, B. To, C. DeHart, X. Li, S.H. Glick, Degradation of ZnO-based window layers for thin-film CIGS by accelerated stress exposures, in: Proc. SPIE 7048 7048, 2008, 70480P. 〈http://dx.doi.org/10.1117/12.795097〉.10.1117/12.795097 ↗
9. Damp heat stable doped zinc oxide films10.1016/j.tsf.2013.08.011 ↗
10. R.f. planar magnetron sputtered ZnO films I: structural properties10.1016/0040-6090(91)90074-8 ↗
11. Texture development of non-epitaxial polycrystalline ZnO films10.1016/j.jcrysgro.2005.11.089 ↗
12. Damp heat stability and annealing behavior of aluminum doped zinc oxide films prepared by magnetron sputtering10.1016/j.tsf.2005.12.130 ↗
13. Influence of damp heat on the optical and electrical properties of Al-doped zinc oxide10.1016/j.tsf.2008.10.107 ↗
14. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
15. High rate (7nm/s), atmospheric pressure deposition of ZnO front electrode for Cu(In,Ga)Se2 thin-film solar cells with efficiency beyond 15%10.1002/pip.2423 ↗
16. L.J. van der Pauw, A method of measuring the resistivity and hall coefficient on lamellae of arbitrary shape Philips Tech. Rev. 20, (8), 1858/59, pp. 220–224.
17. Study of optical constants of films used for the synthesis of broad-band antireflection coatings
18. Ashcroft · 1976
19. Electron scattering mechanisms in fluorine-doped SnO2 thin films10.1063/1.4829672 ↗
20. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
21. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
22. M. Hála, Y. Inoue, H. Kato, G. Rey, F. Werner, C. Schubbert, M. Algasinger, T. Dalibor, S. Siebentritt, Environmental stability of highly conductive nominally undoped ZnO layers, in: Proc. 43rd IEEE Photovoltaic Spec. Conf., Portland, OR, 2016, pp. 1–5, (in press).10.1109/PVSC.2016.7749860 ↗
23. Al-doped zinc oxide films deposited by simultaneous rf and dc excitation of a magnetron plasma: relationships between plasma parameters and structural and electrical film properties10.1063/1.366798 ↗
24. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
25. ZnO and its applications
26. Microstructural evolution during film growth10.1116/1.1601610 ↗
27. M. Hála, R. Vernhes, O. Zabeida, E. Bousser, J. Klemberg-Sapieha, R. Sargent, L. Martinu, Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods, Surf. Coat. Technol. 241 (0), 2014, pp. 33–37, Selected Papers from the Society of Vacuum Coaters 56th Annual Technical Conference – SVC TechCon 2013. 〈http://dx.doi.org/10.1016/j.surfcoat.2013.08.024〉.10.1016/j.surfcoat.2013.08.024 ↗
28. M. Hála, P. Dale, S. Siebentritt, Transparent conducting film based on zinc oxide, LU 93080.
29. S. Takayanagi, T. Yanagitani, M. Matsukawa, Y. Watanabe, A simple technique for obtaining (1120) or (1010) textured ZnO films by RF bias sputtering, in: Proceedings of IEEE Int. Ultrason. Symp., 2010, pp. 1060–1063. http://dx.doi.org/10.1109/ULTSYM.2010.5935655.10.1109/ULTSYM.2010.5935655 ↗