journal article·2015-07

Improved open-circuit voltage of benzodithiophene based polymer solar cells using bulky terthiophene side group

Qian Liu, Xichang Bao, Liangliang Han, Chuantao Gu, Meng Qiu, Zhengkun Du, Ruiying Sheng, Mingliang Sun, Renqiang Yang

Publisher page

Abstract

Terthiophene, including one alpha-alpha and one branching alpha-beta connection of the thiophene units, is introduced as benzodithiophene (BDT) side chain to build a novel two-dimensional (2D) conjugated BDT block. By copolymerizing this BDT block with three electron acceptors (DTTz (bis(thiophene-2-yl)-tetrazine), DPP (diketopyrrolopyrrole), DTffBT (4,7-bis(4-hexylthienyl)-5,6-difluoro-2,1,3-benzothiadiazole)) and one electron donor (TTT (2,5-Di(2-thienyl)thiophene)), four terthiophene side-chained benzodithiophene based copolymers were synthesized. Due to the difference in electron affinity among DTTz, DPP, DTffBT and TTT, these four polymers show different UV-vis absorption spectra and optical band gaps (1.3-2.0 eV), while fortunately they all remain deep highest occupied molecular orbital (HOMO) energy levels (-5.3 to 5.6 eV) which is very favorable to high open-circuit voltage (V-oc) polymer solar cells (PSCs). By comparing the photovoltaic properties with polymers which have same backbone but do not have the bulky 2D side group in the literatures, our polymer solar cells devices show higher V-oc. Especially for PQ3 (a copolymer of benzodithiophene and diketopyrrolopyrrole), the donor photon energy loss (E-g-eV(oc)) is 0.51 eV which is almost the lowest value achieved by the researchers. It can be concluded that: the bulky terthiophene side group helps to improve V-oc of the PSCs devices. The overall performance of solar Cells devices is correlated with the molecule conformation, polymer hole mobility and polymer/PCBM blend film morphology. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
2. Synthesis and characterization of new selenophene-based donor-acceptor low-bandgap polymers for organic photovoltaic cells10.1021/ma2020112 ↗
3. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
4. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
5. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
6. Low-temperature, solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
7. Synthesis and thin-film transistor performance of poly (4,8-didodecylbenzo [1,2-b:4,5-b’] dithiophene)10.1021/cm0602592 ↗
8. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo [1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
9. Synthesis and photovoltaic properties of novel 3,4-ethylenedithiathiophene-based copolymers for organic solar cells10.1039/c2py20995k ↗
10. Synthesis and characterization of benzodithiophene-isoindigo polymers for solar cells10.1039/C1JM14940G ↗
11. Conjugated donor–acceptor (D–A) copolymers in inverted organic solar cells-a combined experimental and modelling study10.1039/c3ta10686a ↗
12. Double acceptor D–A copolymers containing benzotriazole and benzothiadiazole units: chemical tailoring towards efficient photovoltaic properties10.1039/c3ta11698k ↗
13. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
14. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
15. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
16. Synthetic control of structural order in N-alkylthieno [3,4-c] pyrrole-4,6-dione-based polymers for efficient solar cells10.1021/ja103275u ↗
17. Linear side chains in benzo [1,2-b:4,5-b′] dithiophene-thieno [3,4-c] pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
18. [1,2-b:4,5-b′] dithiophene-based conjugated polymers: band gap and energy level control and their application in polymer solar cells10.1039/c1py00197c ↗
19. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi (thienylenevinylene) side chains10.1021/ja060141m ↗
20. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
21. A polybenzo [1,2‐b:4,5‐b′] dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
22. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/ange.201103313 ↗
23. Application of two-dimensional conjugated benzo [1,2-b:4,5-b′] dithiophene in quinoxaline-based photovoltaic polymers10.1021/ma300060z ↗
24. Enhanced photovoltaic performance of diketopyrrolopyrrole (DPP)-based polymers with extended π conjugation10.1021/jp312450p ↗
25. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
26. Bandgap and molecular level control of the low-bandgap polymers based on 3,6-dithiophen-2-yl-2,5-dihydropyrrolo [3,4-c] pyrrole-1,4-dione toward highly efficient polymer solar cells10.1021/ma9012972 ↗
27. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%10.1002/adma.201301494 ↗
28. Manipulating backbone structure to enhance low band gap polymer photovoltaic performance10.1002/aenm.201300031 ↗
29. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
30. Functionalized 3D oligothiophene dendrons and dendrimers-novel macromolecules for organic electronics10.1002/ange.200602653 ↗
31. Hyperconjugated side chained benzodithiophene and 4,7-di-2-thienyl-2,1,3-benzothiadiazole based polymer for solar cells10.1039/c3py01529g ↗
32. Synthesis and photovoltaic properties of D–A copolymers based on alkyl-substituted indacenodithiophene donor unit10.1021/cm2019586 ↗
33. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
34. Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments10.1021/ja409881g ↗
35. Performance of fluorene and terthiophene copolymer in bilayer photovoltaic devices: the role of the polymer conformations10.1016/j.orgel.2012.08.002 ↗
36. Synthesis and electronic properties of semiconducting polymers containing benzodithiophene with alkyl phenylethynyl substituents10.1021/ma101709h ↗
37. Spectral engineering in π-conjugated polymers with intramolecular donor–acceptor interactions10.1021/ar100043u ↗
38. A thieno [3,4-c] pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
39. Effect of interchain interactions on the absorption and emission of poly (3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
40. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
41. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
42. Design rules for donors in bulk‐heterojunction solar cells-towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
43. Development of the colle-salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
44. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
45. Self-consistent molecular orbital methods. XII. Further extensions of Gaussian-type basis sets for use in molecular orbital studies of organic molecules10.1063/1.1677527 ↗
46. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
47. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
48. A benzo [1,2-b:4,5-b′] dithiophene-based copolymer with deep HOMO level for efficient polymer solar cells10.1016/j.solmat.2012.01.025 ↗
49. Donor–acceptor copolymers incorporating polybenzo [1,2-b:4,5-b′] dithiophene and tetrazine for high open circuit voltage polymer solar cells10.1016/j.orgel.2013.05.015 ↗
50. Synthesis and photovoltaic properties of new conjugated polymers based on benzo [1,2-b:4,5-b′] dithiophene10.1166/jnn.2012.5915 ↗
51. High open circuit voltage in regioregular narrow band-gap polymer solar cells10.1021/ja506785w ↗
52. A low band-gap polymer based on unsubstituted benzo [1,2-b:4,5-b′] dithiophene for high performance organic photovoltaics10.1039/c2cc32985a ↗