journal article·2024-07

Nickel oxide incorporated CH3NH3PbI3 for stable and efficient planar perovskite solar cells

V. Arjun, K.P. Muthukumaran, A. Nithya, M. Yoshimura, S. Karuppuchamy

Publisher page

Abstract

Photovoltaic performance and stability are critical for the commercialization of perovskite solar cells (PSC). In this research article, NiO nanoparticles are directly incorporated into CH 3NH 3PbI 3 to improve the photovoltaic properties and sustainability of perovskite solar cells. The NiO NPs have been successfully synthesised by hydrothermal method. The hydrothermally synthesised NiO incorporated CH 3NH 3PbI 3 based Perovskite Solar Cells (NiO–CH 3NH 3PbI 3 based PSC) shows a superior power conversion efficiency of 13.43 %, current density (J sc) of 22.79 mA/cm 2, an open circuit voltage (V oc ) of 0.95 V and a Fill Factor (FF) of 0.64 compared with NiO free perovskite solar cell. Electrochemical Impedance Spectroscopy (EIS) investigation reveals the enhancement in the charge transport properties of the NiO–CH 3NH 3PbI 3 based PSCs. The EIS results prove that NiO NPs have improved the perovskite layer quality, charge generation and collection, and charge transport properties. The strong PL quenching indicates the good charge separation/injection due to the formation of smart perovskite crystal structure in the NiO–CH 3NH 3PbI 3 composite. The NiO–CH 3NH 3PbI 3 based PSC along with a carbon back electrode has achieved impressive stability over 600 h.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A review on perovskite solar cells: evolution of architecture, fabrication techniques, commercialization issues and status10.1016/j.solener.2020.01.080 ↗
2. Electrodeposition of nanostructured bilayer CuI@CuSCN as hole transport material for highly efficient inverted perovskite solar cells10.1016/j.jallcom.2021.160530 ↗
3. A review of perovskites solar cell stability
4. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
5. Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO 2 nanocrystals as the robust electron-transporting layer10.1002/adma.201600619 ↗
6. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
7. Nanostructured bilayer CuSCN@CuI thin films as efficient inorganic hole transport material for inverted perovskite solar cells10.1016/j.ceramint.2021.03.101 ↗
8. Surfactant assisted electrochemical growth of ultra-thin CuSCN nanowires for inverted perovskite solar cell applications10.1016/j.orgel.2021.106214 ↗
9. Inactive impurity stabilizes the highly efficient perovskite photovoltaics10.1016/j.joule.2022.09.013 ↗
10. Patch-healed grain boundary strategy to stabilize perovskite films for high-performance solar modules10.1016/j.nanoen.2023.108759 ↗
11. Efficient perovskite solar cells depending on TiO 2 nanorod arrays10.1021/acsami.6b05971 ↗
12. A review of inorganic hole transport materials for perovskite solar cells10.1002/admi.201800882 ↗
13. Air-stable n–i–p planar perovskite solar cells using nickel oxide nanocrystals as sole hole-transporting material10.1021/acsaem.9b00603 ↗
14. Molecular engineering of face-on oriented dopant-free hole transporting material for perovskite solar cells with 19% PCE10.1039/C7TA01718A ↗
15. Inorganic hole transporting materials for stable and high efficiency perovskite solar cells10.1021/acs.jpcc.8b01177 ↗
16. Review of current progress in inorganic hole-transport materials for perovskite solar cells10.1016/j.apmt.2018.12.011 ↗
17. Hysteresis-free perovskite solar cells with compact and nanoparticle NiO for indoor application
18. Nickel oxide for inverted structure perovskite solar cells10.1016/j.jechem.2020.04.027 ↗
19. Hole selective NiO contact for efficient perovskite solar cells with carbon electrode10.1021/nl504701y ↗
20. NiO nanosheets as efficient top hole transporters for carbon counter electrode based perovskite solar cells10.1039/C5TA06458A ↗
21. Tailoring of ligand‐off nanoparticles inks for thin p‐type oxide overlayers formation with maintaining intact halide perovskite
22. Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells10.1039/C7TA01593C ↗
23. Enhanced charge transport in low temperature carbon-based n-i-p perovskite solar cells with NiOx-CNT hole transport material10.1016/j.solmat.2021.111241 ↗
24. Enhanced hole extraction by NiO nanoparticles in carbon-based perovskite solar cells10.1016/j.electacta.2019.04.191 ↗
25. Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells10.1038/s41467-018-04028-8 ↗
26. Highly efficient inverted hole-transport-layer-free perovskite solar cells10.1039/C9TA10694D ↗
27. Boosting efficiency of hole conductor-free perovskite solar cells by incorporating p-type NiO nanoparticles into carbon electrodes10.1016/j.solmat.2018.01.010 ↗
28. Mixed(5-AVA)x MA 1−x PbI 3−y(BF 4)y perovskites enhance the photovoltaic performance of hole-conductor-free printable mesoscopic solar cells10.1039/C7TA09604F ↗
29. Effect of guanidinium on mesoscopic perovskite solar cells10.1039/C6TA08418D ↗
30. Enhanced electronic properties in CH3 NH3 PbI3 via LiCl mixing for hole-conductor-free printable perovskite solar cells10.1039/C6TA08021A ↗
31. Air-stable, hole-conductor-free high photocurrent perovskite solar cells with CH3NH3PbI3–NiO nanoparticles composite10.1016/j.nanoen.2016.08.006 ↗
32. Intermixing-seeded growth for high-performance planar heterojunction perovskite solar cells assisted by precursor-capped nanoparticles10.1039/C5EE03229F ↗
33. Stability enhancement in perovskite solar cells with perovskite/silver–graphene composites in the active layer10.1021/acsenergylett.8b02201 ↗
34. Interfacial engineering with carbon–graphite–Cu δ Ni 1−δ O for ambient-air stable composite-based hole-conductor-free perovskite solar cells10.1039/D0NA00852D ↗
35. Improved stability of inverted and flexible perovskite solar cells with carbon electrode10.1021/acsaem.0c00702 ↗
36. Low-toxicity perovskite applications in carbon electrode perovskite solar cells—a review10.3390/electronics10101145 ↗
37. High performing air stable inverted perovskite solar cells using nanostructured CuSCN thin film as hole transport material10.1016/j.solmat.2021.111116 ↗
38. A comparative study on the electrochemical properties of nanoporous nickel oxide nanowires and nanosheets prepared by a hydrothermal method10.1039/C8RA02862A ↗
39. Influence of particle size on performance of a nickel oxide nanoparticle-based supercapacitor
40. A comparative study of magnetic, photocatalytic and dielectric properties of NiO nanoparticles synthesized by sol-gel and composite hydroxide mediated method10.1016/j.ceramint.2019.05.287 ↗
41. Size effects on properties of NiO nanoparticles grown in alkalisalts10.1021/jp308073c ↗
42. Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics
43. Comparison of nanoscaled and bulk NiO structural and environmental characteristics by XRD, XAFS, and XPS10.1021/cm300739y ↗
44. Hollow Cu-doped NiO microspheres as anode materials with enhanced lithium storage performance
45. Effect of annealing temperature on a highly sensitive nickel oxide-based LPG sensor operated at room temperature10.1007/s00339-021-04444-6 ↗
46. Fabrication of efficient and stable planar perovskite solar cell using copper oxide as hole transport material10.1016/j.jallcom.2022.166285 ↗
47. One-step electrodeposition of CuSCN/CuI nanocomposite and its hole transport-ability in inverted planar perovskite solar cells10.1088/1361-6528/abfe25 ↗
48. Fabrication of planar perovskite solar cells using ternary metal oxide nanocomposite as hole-transporting material10.3390/en16093696 ↗
49. The interaction between hybrid organic–inorganic halide perovskite and selective contacts in perovskite solar cells: an infrared spectroscopy study10.1039/C6CP01265E ↗
50. MAPbI3-based efficient, transparent and air-stable broadband photodetectors10.1007/s12648-020-02004-x ↗
51. Deciphering the role of impurities in Methylammonium Iodide and their impact on the performance of perovskite solar cells10.1002/admi.201600593 ↗
52. A dopant‐free polymeric hole‐transporting material enabled high fill factor over 81% for highly efficient perovskite solar cells10.1002/aenm.201902600 ↗
53. Conformal imidazolium 1D perovskite capping layer stabilized 3D perovskite films for efficient solar modules10.1002/advs.202204017 ↗
54. Multifunctional molecule interface modification for high- performance inverted wide-bandgap perovskite cells and modules10.1039/D3TA02209A ↗