A high-performance, metallodielectric 2D photonic crystal for thermophotovoltaics
Source abstract
Abstract
Fuel-combustion-based thermophotovoltaic (TPV) systems are emerging as a viable power source for small, portable generators for a spectrum of applications such as UAVs, robotic platforms, and sensors. In TPV systems, an emitter heated to above 1000 K emits radiation that is then converted to electricity by a low bandgap photovoltaic cell. One promising class of TPV emitters are two-dimensional photonic crystals (PhCs) made of tantalum, which have shown high-temperature stability at 1150–1250K over hundreds of hours [1], [2] and have been implemented in a prototype system with 4.4% fuel-to-electricity efficiency [1] . Tantalum PhCs filled and capped with hafnium oxide can enable even higher optical performance with in-band emissivities of 0.8–0.9. However, two key features are difficult to realize simultaneously: a uniformly filled cavity and a thin capping layer of hafnium oxide [3], [4] . Here, we present a process that results in reduced roughness and better thickness control of the capping layer. We use room temperature reflectance measurements and full system simulations to estimate system performance gains. This selective emitter paves the way toward efficient, practical, and portable mesoscale generators.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Metamaterials and Metasurfaces Applications · Quantum Electrodynamics and Casimir Effect
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Enabling efficient heat-to-electricity generation at the mesoscale10.1039/C7EE00366H ↗
2. Stelmakh · 2017
3. Fabrication of an omnidirectional 2D photonic crystal emitter for thermophotovoltaics
4. Improved omnidirectional 2D photonic crystal selective emitter for thermophotovoltaics
5. Thermodynamic analysis on energy densitites of batteries10.1039/c0ee00777c ↗
6. Chan · 2015
7. Doyle · 2001
8. Fraas · 2010
9. Thermophotovoltaics on the move to applications10.1016/j.apenergy.2012.12.067 ↗
10. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
11. Efficient thermophotovoltaics10.1038/s41566-020-0585-1 ↗
12. High-efficiency thermophotovoltaic system that employs an emitter based on a silicon rod-type photonic crystal10.1021/acsphotonics.9b00984 ↗
13. Selective emitters for thermophotovoltaic applications10.1002/pssa.201600410 ↗
14. Practical emitters for thermophotovoltaics: A review10.1117/1.JPE.9.032713 ↗
15. Testing and modeling of a solar thermophotovoltaic power system10.1063/1.49687 ↗
16. Chen · 1999
17. Solar thermophotovoltaic using al2o3/Er3Al5O12 eutectic composite selective emitter10.1109/PVSC.2000.916107 ↗
18. Characterisation of rare earth selective emitters for thermophotovoltaic applications10.1016/S0927-0248(01)00127-1 ↗
19. Practical thermophotovoltaic generators10.1134/1.1787116 ↗
20. Tpv systems and state-of-art development
21. High performance optical absorber based on a plasmonic metamaterial10.1063/1.3442904 ↗
22. Multispectral near-perfect metamaterial absorbers using spatially multiplexed plasmon resonance metal square structures10.1364/JOSAB.30.000656 ↗
23. Stable high temperature metamaterial emitters for thermophotovoltaic applications10.1063/1.4878849 ↗
24. Refractory plasmonics with titanium nitride: Broadband metamaterial absorber10.1002/adma.201401874 ↗
25. Heterogeneous metasurface for high temperature selective emission10.1063/1.4893742 ↗
26. High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter10.1364/OPTICA.5.000213 ↗
27. Controlling thermal emission with refractory epsilon-near-zero metamaterials via topological transitions10.1038/ncomms11809 ↗
28. Metamaterial emitter for thermophotovoltaics stable up to 1400 ∘c
29. High-efficiency solar-thermophotovoltaic system equipped with a monolithic planar selective absorber/emitter10.1117/1.JPE.5.053099 ↗
30. Unidirectional radiative heat transfer with a spectrally selective planar absorber/emitter for high-efficiency solar thermophotovoltaic systems10.7567/APEX.9.112302 ↗
31. Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics10.1073/pnas.1301004110 ↗
32. A nanophotonic solar thermophotovoltaic device10.1038/nnano.2013.286 ↗
33. Enhanced photovoltaic energy conversion using thermally based spectral shaping10.1038/nenergy.2016.68 ↗
34. Metallic photonic crystal absorber-emitter for efficient spectral control in high-temperature solar thermophotovoltaics10.1002/aenm.201400334 ↗
35. Prototype of radioisotope thermophotovoltaic system using photonic crystal spectral control
36. Three-dimensional photonic-crystal emitter for thermal photovoltaic power generation10.1063/1.1592614 ↗
37. Efficient low-temperature thermophotovoltaic emitters from metallic photonic crystals10.1021/nl801571z ↗
38. Three-dimensional metallo-dielectric selective thermal emitters with high-temperature stability for thermophotovoltaic applications10.1016/j.solmat.2014.11.017 ↗
39. Electrodeposited 3D tungsten photonic crystals with enhanced thermal stability10.1021/cm2019789 ↗
40. Three-dimensional self-assembled photonic crystals with high temperature stability for thermal emission modification10.1038/ncomms3630 ↗
41. High-temperature resistive surface grating for spectral control of thermal radiation10.1063/1.1560867 ↗
42. Thermophotovoltaic generation with selective radiators based on tungsten surface gratings10.1063/1.1807031 ↗
43. Two-dimensional tungsten photonic crystals as selective thermal emitters10.1063/1.2927484 ↗
44. Fabrication of two-dimensional tungsten photonic crystals for high-temperature applications10.1116/1.3646475 ↗
45. Enabling high-temperature nanophotonics for energy applications10.1073/pnas.1120149109 ↗
46. Large-area fabrication of high aspect ratio tantalum photonic crystals for high-temperature selective emitters10.1116/1.4771901 ↗
47. High-temperature tantalum tungsten alloy photonic crystals: Stability, optical properties, and fabrication10.1063/1.4821586 ↗
48. Design of wide-angle selective absorbers/emitters with dielectric filled metallic photonic crystals for energy applications10.1364/OE.22.00A144 ↗
49. Global optimization of omnidirectional wavelength selective emitters/absorbers based on dielectric-fileld anti-reflection coated two-dimensional metallic photonic crystals10.1364/OE.22.021711 ↗
50. Thermal emission and design in 2D-periodic metallic photonic crystal slabs10.1364/OE.14.008785 ↗
51. Tailoring thermal emission via q matching of photonic crystal resonances10.1103/PhysRevA.83.033810 ↗
52. Evaluation of thermal stability in spectrally selective few-layer metallo-dielectric structures for solar thermophotovoltaics10.1016/j.jqsrt.2018.02.037 ↗
53. Structural degradation of tungsten sandwiched in hafnia layers determined by in-situ XRD up to 1520 ∘c
54. High-temperature stability and selective thermal emission of polycrystalline tantalum photonic crystals10.1364/OE.21.011482 ↗
55. S4: A free electromagnetic solver for layered periodic structures10.1016/j.cpc.2012.04.026 ↗
56. Optical properties and structure of HfO2 thin films grown by high pressure reactive sputtering10.1088/0022-3727/40/17/037 ↗
57. Modest · 2013
58. Markus Deserno, How to generate equidistributed points on the surface of a sphere, URL https://www.cmu.edu/biolphys/deserno/pdf/sphere_equi.pdf.
59. Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators10.1016/j.solmat.2009.11.015 ↗
60. Savannah ALD System User Manual, Doc 19-29-01628 Rev. 2, Cambridge NanoTech / Veeco.