journal article·2020-06Open access

In-depth analysis of defects in TiO2 compact electron transport layers and impact on performance and hysteresis of planar perovskite devices at low light

Anthony Lewis, Joel R. Troughton, Benjamin Smith, James McGettrick, Tom Dunlop, Francesca De Rossi, Adam Pockett, Michael Spence, Matthew J. Carnie, Trystan M. Watson, Cécile Charbonneau

Abstract

Abstract Properties of the electron transport layer (ETL) are known to influence the performance of lead halide perovskite solar cells (PSCs). But so far very little emphasis has been given on the increased impact of this layer at low light. In this work we compare the effect of thickness and coverage of a TiO2 compact layer on the performance and hysteresis of methyl ammonium lead iodide planar devices tested under 200 lux vs. 1 sun illumination. Standard TiO2 layers are produced with incremental thickness and coverage using sequential spray pyrolysis of a Ti-acetylacetonate precursor (0–50 sprays, 1 spray ~ 1 nm TiO2). Thorough materials characterisation combining FEG-SEM, XPS, and cyclic voltammetry shows that a crystalline, nearly pin-hole free TiO2 layer is achieved by deposition of ≥15 sprays over small to large areas (0.2 mm2–1 cm2). Device performance is affected by two main parameters, namely the coverage yield and thickness of the TiO2 layer, especially under 200 lux illumination. A 25 vs. 50 sprays-TiO2 layer is found to provide the best compromise between coverage and thickness and avoid charge recombination at the TiO2/perovskite interface whilst minimizing resistive losses with 11.7% average PCE at 200 lux vs 7.8% under 1 sun. Finally, the analysis of I/V forward vs. reverse scans and open circuit voltage decay data suggests that hysteresis is greatly affected by the capacitive properties of the ETL at low light, whilst other phenomena such as ion migrations may dominate under 1 sun.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Functional materials, device architecture, and flexibility of perovskite solar cell10.1007/s42247-018-0013-1 ↗
3. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
4. Perovskite solar cells—towards commercialization10.1021/acsenergylett.7b00517 ↗
5. Perovskite solar cells: progress and advancements10.3390/en9110861 ↗
6. All printable perovskite solar modules with 198 cm2 active area and over 6% efficiency10.1002/admt.201800156 ↗
7. Outstanding indoor performance of perovskite photovoltaic cells - effect of device architectures and interlayers10.1002/solr.201800207 ↗
8. Flexible perovskite photovoltaic modules and solar cells based on atomic layer deposited compact layers and UV-irradiated TiO2 scaffolds on plastic substrates10.1002/aenm.201401808 ↗
9. Sherahilo
10. High efficiency photovoltaic module based on mesoscopic organometal halide perovskite10.1002/pip.2557 ↗
11. Perovskite photovoltaics for dim-light applications10.1002/adfm.201503448 ↗
12. Highly efficient perovskite solar cells for light harvesting under indoor illumination via solution processed SnO2/MgO composite electron transport layers10.1016/j.nanoen.2018.04.027 ↗
13. Sub-nanometer conformal TiO2 blocking layer for high efficiency solid-state perovskite absorber solar cells10.1002/adma.201306271 ↗
14. Interface modification by ionic liquid: a promising candidate for indoor light harvesting and stability improvement of planar perovskite solar cells10.1002/aenm.201801509 ↗
15. Organic photovoltaic cells-promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
16. Direct contact of selective charge extraction layers enables high-efficiency molecular photovoltaics10.1016/j.joule.2018.03.017 ↗
17. Thermal stability-enhanced and high-efficiency planar perovskite solar cells with interface passivation10.1021/acsami.7b10994 ↗
18. High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture10.1039/C6EE02687G ↗
19. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
20. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
21. Low-temperature and hysteresis-free electron-transporting layers for efficient, regular, and planar structure perovskite solar cells10.1002/aenm.201501056 ↗
22. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
23. An easy-to-fabricate low-temperature TiO2 electron collection layer for high efficiency planar heterojunction perovskite solar cells10.1063/1.4890245 ↗
24. Highly compact TiO2 layer for efficient hole-blocking in perovskite solar cells
25. An electron beam evaporated TiO2 layer for high efficiency planar perovskite solar cells on flexible polyethylene terephthalate substrates10.1039/C5TA07515G ↗
26. Nanostructured TiO2 grown by low-temperature reactive sputtering for planar perovskite solar cells10.1021/acsaem.9b00708 ↗
27. Identifying the optimum thickness of electron transport layers for highly efficient perovskite planar solar cells10.1039/C5TA03686K ↗
28. Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsnano.6b01575 ↗
29. TiO2 composite electron transport layers for planar perovskite solar cells by mixed spray pyrolysis with precursor solution incorporating TiO2 nanoparticles10.1088/1674-1056/27/1/018810 ↗
30. Understanding the role of the electron-transport layer in highly efficient planar perovskite solar cells10.1002/cphc.201601245 ↗
31. Influence of TiO 2 blocking layer morphology on planar heterojunction perovskite solar cells10.1246/cl.160059 ↗
32. Mesoporous perovskite solar cells and the role of nanoscale compact layers for remarkable all-round high efficiency under both indoor and outdoor illumination10.1016/j.nanoen.2016.10.030 ↗
33. Plasma-assisted atomic layer deposition of TiO 2 compact layers for flexible mesostructured perovskite solar cells10.1016/j.solener.2017.04.028 ↗
34. Can slow-moving ions explain hysteresis in the current-voltage curves of perovskite solar cells?10.1039/C5EE02740C ↗
35. On the origin of hysteresis in perovskite solar cells10.1002/adfm.201602231 ↗
36. It takes two to tango - double-layer selective contacts in perovskite solar cells for improved device performance and reduced hysteresis10.1021/acsami.7b00900 ↗
37. How the formation of interfacial charge causes hysteresis in perovskite solar cells10.1039/C8EE01447G ↗
38. The interplay between trap density and hysteresis in planar heterojunction perovskite solar cells10.1021/acs.nanolett.7b01211 ↗
39. Ferroelectric polarization in CH3NH3PbI3 perovskite10.1021/acs.jpclett.5b00695 ↗
40. Capacitive dark currents, hysteresis, and electrode polarization in lead halide perovskite solar cells10.1021/acs.jpclett.5b00480 ↗
41. Sub-nanometer conformal TiO2 blocking layer for high efficiency solid-state perovskite absorber solar cells10.1002/adma.201306271 ↗
42. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
43. Annealing-free perovskite films by instant crystallization for efficient solar cells10.1039/C6TA02490D ↗
44. Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
45. Cracking of titania nanocrystalline coatings10.1016/j.jeurceramsoc.2008.02.002 ↗
46. Electrochemical characterization of TiO2 blocking layers for dye-sensitized solar cells10.1021/jp4103614 ↗
47. Solution processing of TiO2 compact layers for 3rd generation photovoltaics10.1016/j.ceramint.2016.04.125 ↗
48. Influences of alcoholic solvents on spray pyrolysis deposition of TiO 2 blocking layer films for solid-state dye-sensitized solar cells10.1016/j.jssc.2012.10.010 ↗
49. Quantitative electron spectroscopy of surfaces10.1002/sia.740010103 ↗
50. Penn algorithm including damping for calculating the electron inelastic mean free path10.1021/acs.jpcc.5b00403 ↗
51. Electrodeposited ultrathin TiO2 blocking layers for efficient perovskite solar cells
52. Room-temperature processible TiO2 electron selective layers with controllable crystallinity for high efficiency perovskite photovoltaics10.1016/j.solmat.2017.01.006 ↗
53. Raman spectroscopy: a new approach to measure the percentage of anatase TiO2 exposed (001) facets10.1021/jp301256h ↗
54. Raman scattering, electrical and optical properties of fluorine-doped tin oxide thin films with (200) and (301) preferred orientation10.1016/j.matchemphys.2014.08.055 ↗
55. Laser-patterning engineering for perovskite solar modules with 95% aperture ratio10.1109/JPHOTOV.2017.2732223 ↗
56. Mesoporous perovskite solar cells and the role of nanoscale compact layers for remarkable all-round high efficiency under both indoor and outdoor illumination10.1016/j.nanoen.2016.10.030 ↗
57. Determination of unique power conversion efficiency of solar cell showing hysteresis in the I-V curve under various light intensities10.1038/s41598-017-10953-3 ↗
58. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
59. Ionic influences on recombination in perovskite solar cells10.1021/acsenergylett.7b00490 ↗
60. Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis10.1038/ncomms13831 ↗